Ay guys when he says now just do the same to the other side while taking of the cover there is another clip you have to press in. The clip is inside the part where we removed the warranty sticker. Just press on the top part and it should still be a little hard to pull off but you can do it
Hey man. Thank you so much for making this video. 2 years ago, my Xbox died and there was a Jet Set Radio Future/Sega GT 2002 disc bundle in there. By the time I watch this video I managed to pull it out of the system. This game really mean alot to me. Once again, thank you :)
Really wish you'd explained the clips a bit more. I don't understand in which way I'm supposed to release the clips, it's a blind job so it's not exactly easy.
It is yeah, But i got it open if you go where he looked and get a flashlght your gonna see where the tabs at insted of ripping the warrenty sticker, get a flathead screw driver and get behind the tab flap and just pry it enough to pop one of them off then get to the back and put the flathead into the gap where you opened it and try n squeez the head in there by twisting left in right and strait at the same time then both should pop off idk about the front tho i havnt got there
Awful tutorial missing a number of vital steps. Don't break your bottom backplate trying to force it off, there are 2 clips on the other used he references.
Yea mine turns off after a few seconds of being on and idk why. i blew into the vents and it ran a little longer which leads me to believe it's just dirty inside and needs cleaned, hence why I'm here.
Sgtjames17 :-\ I got a couple of cans with air in them to blow out all the dust and then the Xbox just didn’t turn on at all. Hopefully it works better for you.
If anyone else is having trouble taking the front plate off, I only managed it after taking the 5 screws out and flipping it over to wiggle the top plate off.
does anyone have any tips for taking off the clips? i know they’re stubborn but i’m not sure which direction i should be pulling or if i’m not doing it right
I have an Xbox 360 problem, I can turn it on with the controller the power supply is green, and the console does turn on, but after about 5 min everything turn off. How can I fix this?
I hate it when videos give you incomplete information. I'm going to a different one that shows how to remove the extra clips under the security sticker he never mentioned.
@@Pocket-Lent well for your situation it showed on screen instructions did it not? And if not, I’d say just look up a video for cleaning the ventilation areas
I wish he would have said dont open it. The fan wont spin and i try to open it to clean it. It will brake if u open it. U need a screw driver Alan head to enter metal. Needs warning about skill level.
Here in 2022, these DAMN CLIPS are IMPOSSIBLE TO REVOVE.
I know
i fricking agree in 2024 whos idee was that
same in 2024
Ay guys when he says now just do the same to the other side while taking of the cover there is another clip you have to press in. The clip is inside the part where we removed the warranty sticker. Just press on the top part and it should still be a little hard to pull off but you can do it
I am so glad I came to the comments. I could tell there was a clip there, but couldn't see anything. Thank you so much for making this comment!
Hero
Hey man. Thank you so much for making this video. 2 years ago, my Xbox died and there was a Jet Set Radio Future/Sega GT 2002 disc bundle in there. By the time I watch this video I managed to pull it out of the system. This game really mean alot to me. Once again, thank you :)
How do u just “pop out the tabs with a screwdriver”?
Pull in very gently then pull up slowly they hook 🪝
That comment was made 7 months before you answered 0-0
@@samc7803 i dont give a damn. I just saw it then
@@etchosts8162 mad respect for coming back man
@@samc7803 @Etc Hosts what's better than this? guys bein dudes.
Really wish you'd explained the clips a bit more. I don't understand in which way I'm supposed to release the clips, it's a blind job so it's not exactly easy.
i know right, though i think he did his best
It literally shows him doing it
Jesus Christ the top and bottom holders are extremely difficult to release, anyone have some tips to remove the top and bottom things with tabs
It is yeah, But i got it open if you go where he looked and get a flashlght your gonna see where the tabs at insted of ripping the warrenty sticker, get a flathead screw driver and get behind the tab flap and just pry it enough to pop one of them off then get to the back and put the flathead into the gap where you opened it and try n squeez the head in there by twisting left in right and strait at the same time then both should pop off idk about the front tho i havnt got there
how do you expect me to take off the bottom without being able to see the fourth clip???????????
Awful tutorial missing a number of vital steps. Don't break your bottom backplate trying to force it off, there are 2 clips on the other used he references.
I did this whole thing with my hands and a spoon at 3am because my disc drive wouldn't shut all the way, or open all the way for that matter
Mad respect bro😂😭
Dude mine doesnt read game discs anymore so ima try this out and try to remember to say if it worked for my problem
I finally figured out how to take the plastic off it was more progress than I anticipated thanks
WHICH WAY ARE YOU MOVING THE SCREWDRIVER TO PRY IT
you just jam the screwdriver in while scraping the outside of the Xbox and it will go underneath the clip
TORX
any alternitives to the torx screw?
there is none
What? No
No, the warranty ran out.
If you remove the security screws, the front panel where the power button is comes right off
My Xbox would just turn off by itself within a couple minutes from being turned one do you know why?
Yea mine turns off after a few seconds of being on and idk why. i blew into the vents and it ran a little longer which leads me to believe it's just dirty inside and needs cleaned, hence why I'm here.
Sgtjames17 :-\
I got a couple of cans with air in them to blow out all the dust and then the Xbox just didn’t turn on at all. Hopefully it works better for you.
@@gristlyknave831 thanks for telling me that, i hope it works for me too.
thank you! Very helpful!
Thank you for your help 🙏
Good video bro nice and short
Thank you, got me where I needed. Took DVD-Rom out and fixed it.. Now my daughter don't want it and said to throw it away!! SMDH!
i had to use the power of hulk to get the back plate off
I still can't pry it off, how did u do it
How did you pry it off, I'm still trying to open the stupid thing
I can’t hit none of those clips :/
I know I'm late can you tell me how to take off the case I already unclipped it and it still doesn't come off
Does anyone know what kind of screwdriver he’s using for the black ones I can’t figure it out thank you
If anyone else is having trouble taking the front plate off, I only managed it after taking the 5 screws out and flipping it over to wiggle the top plate off.
Did you have any warranty on your Xbox 360 S?
Great camera angles, lighting, and explanation.
It worked ExTRemeLy WELL
My xbox 360 s had a game fall out of its cd drive as it was on and playing. Could i just replace the cd drive with a new on to fix it?
does anyone have any tips for taking off the clips? i know they’re stubborn but i’m not sure which direction i should be pulling or if i’m not doing it right
Were the clipssss
I have an Xbox 360 problem, I can turn it on with the controller the power supply is green, and the console does turn on, but after about 5 min everything turn off. How can I fix this?
Missing a few instructions! I got half way at least.
had broked my faceplate what should i do now
@@haideraftab5879 do you have sellotape?
@@new-world-soul yes
but can i buy new faceplate of 360 s
@@haideraftab5879 GO FOR GOLD
@@new-world-soul what?
I hate it when videos give you incomplete information.
I'm going to a different one that shows how to remove the extra clips under the security sticker he never mentioned.
And i thought the older revisions where annoying...
Welp, my Xbox is broken
I don't have that screw driver...
TWERK screws
Xbox 360 has a red dot on the console, not a red ring. Any ideas?
Mines does the same. By any chance does it say ventilation error?
Oh, no, that’s a hardware failure, same thing is going on with mine
Unless your Xbox 360 isn’t a model S
Mines is totally a model S
@@Pocket-Lent well for your situation it showed on screen instructions did it not? And if not, I’d say just look up a video for cleaning the ventilation areas
comes off pretty swiftly lmao the 2 sides don't have the same pulls wtf is this tutorial 😂
Great video
Godammit, why can't this stupid console be fucking normal and use SCREWS on the exterior?
Using a hammer would be a better option in my opinion :D
Yeah, I’m so pissed off at it I’m thinking about using my 12 gauge and taking it out of my misery constantly freezing up on gameplay
A lot easier than the original
Useless! The 'most difficult part' (releasing the clips) is totally obscured by you left hand.
Seems kinda like a pain in the ass just to open the concele up the Xbox one is way eazy
I wish he would have said dont open it.
The fan wont spin and i try to open it to clean it. It will brake if u open it.
U need a screw driver Alan head to enter metal. Needs warning about skill level.
The video says to do so at your own risk.
Or twerk (;
no
"These clips are the hardest part" is the biggest lie of the century
No. Definitely the most difficult part
@@zollotech I got those off in 30 seconds. The front faceplate took me a good half hour
And i thought the older revisions where annoying...