I really hoped this video helped you. If you need any interior parts, check attached link to my store!!!! rover.ebay.com/rover/1/711-53200-19255-0/1?mpre=https%3A%2F%2Fwww.ebay.com%2Fstr%2Fbentleysautoparts&campid=5338488856&toolid=20008
@@richardyoung5586 Thank you, right now I'm sold out. I'm going on a inventory run tomorrow to biggest vendor. They usually have some, so I will keep you posted. Price depends on if it has any flaws, usually around $110.00 with free shipping.
@@welch44 Its actually down right now. I was getting ready to renew it,and this virus showed up. here is the link to my ebay store. rover.ebay.com/rover/1/711-53200-19255-0/1?mpre=https%3A%2F%2Fwww.ebay.com%2Fstr%2Fbentleysautoparts&campid=5338488856&toolid=20008
'99 S 10, my dash lights crapped out Christmas Eve about 10 PM and had to drive about 9 miles home on dimly or unlit roads unable to see my gauges or speedo, no fun. I already ordered the new headlight/dimmer switch (it had been acting flaky for about 10 years now) but was in the dark about how to remove the dash bezel and found this video. THANK YOU!!! You probably saved me much time and profane language trying to figure this out.🤝🤝🤝👍👍👍
OK I know you can't see me but JAW DROPPED BIGTIME!!! Had NO idea it was so simple. LOVE my 03' and going to restore it and this helped BIGTIME!!!!!!!!!!!!! THANK YOU!!!!!!!!!!
Thank you so much for this video !!. I must replace my heater control , so this is very helpful !! Please be safe and God bless you and your family !!!!! Eddy
That helps a lot. My "service engine soon" light went out and I'm pretty sure the flex fuel sensor didn't just magically fix itself so my best guess is that the bulb finally burned out. Call me crazy for wanting that service engine soon light back....but it seems like a good idea to me to have that working properly. Thanks for the informative video. Be well.
Thanks ,great video , my ashtray is broken so I had to remove the basil to get the top screws out of the ashtray to replace it with a used part I bought
thank you very much I did put a little break right where you said on the right side I would have never figured it out still afraid it will crack just wanted to check my heater.. thanks
I think 02 was the switch over from the double din from din &1/2. (Radio and then a radio in half ) Bravadas were all double din. So if you do a radio swap to a pre 02 touchscreen use a bravada or a 02+
What models had the 4" opening ? Because mine is the 3 and 1/4" opening and I'm planning to put a 6.2" in dash double din tv and wondered why there is a difference in size opening? My vehicle is a 2000 Chevrolet S10 blazer
Am needing to replace the headlight grounding relay that is behind the light switch area. As it stands, it looks like I will have to stand on my head and look up under the dash towards the front speaker!
Nice tip on the two different head unit opening sizes. A minor but miserable difference. Why do manufacturers do dumb stuff like this? 🙂I believe the size difference has to do with the style of head unit. Also, and I understand why you cut them to save time, but I always cringe when I see factory harnesses getting cut up. Whatever - but thanks again for the tips on the hidden screws. Would have liked to have seen the plastic tabs on the back of the bezel as well...but maybe next video? Anyway, THANKS!
There is a little orange slide that you have to pull out. After you pull the orange slide, push a flathead screwdriver in the top section. That will put pressure on the tabs, and release the plug with a little bit of pulling. There kind of a pain.
Hope your doing well! Wanted to know what it would be to repair/replace my current dash bezel. I have an 02 blazer ls and I live in FL, needless to say it is cracked to hell. When I first got it my dad and his good old family friend (moron) installed aftermarket speakers and a head unit and they sent it when they took mine off...
You dont have to remove it completely. Just take the 4 screws off that are on the front. The pull down from the top to expose tge two screws on the bottom of the bezel. Once you get the 4 screws out 7mm. It will pull down from the top.
Thats a tough one. Pretty much you have to pull the whole dash back to get to that. Unless there is a secret that i have never seen. I dont have a video on that unfortunately.
DO NOT CUT AIR BAG WIRES! It would be so much easier to show someone how to properly remove the wiring plugs than to tell them to hack up thier vehicle. If you slide a flat blade screw driver down into slot on the back of the plug and turn it will release.
If you watched the video, I said to use a screw driver to release that clip. I cut them, since im pulling parts, and try to get as many parts in a short period of time. But yes definitely dont cut any wires while doing yours.
I really hoped this video helped you. If you need any interior parts, check attached link to my store!!!! rover.ebay.com/rover/1/711-53200-19255-0/1?mpre=https%3A%2F%2Fwww.ebay.com%2Fstr%2Fbentleysautoparts&campid=5338488856&toolid=20008
I'm looking for a bezel for a 2000 s/10 dark grey do u have one and how much that in advance, great video!
@@richardyoung5586 Thank you, right now I'm sold out. I'm going on a inventory run tomorrow to biggest vendor. They usually have some, so I will keep you posted. Price depends on if it has any flaws, usually around $110.00 with free shipping.
Also measure your radio opening. I think yours will be 3 1/4 inch, but they make a 4 inch as well.
Can’t find your website. Is it still up
@@welch44 Its actually down right now. I was getting ready to renew it,and this virus showed up. here is the link to my ebay store. rover.ebay.com/rover/1/711-53200-19255-0/1?mpre=https%3A%2F%2Fwww.ebay.com%2Fstr%2Fbentleysautoparts&campid=5338488856&toolid=20008
'99 S 10, my dash lights crapped out Christmas Eve about 10 PM and had to drive about 9 miles home on dimly or unlit roads unable to see my gauges or speedo, no fun. I already ordered the new headlight/dimmer switch (it had been acting flaky for about 10 years now) but was in the dark about how to remove the dash bezel and found this video. THANK YOU!!! You probably saved me much time and profane language trying to figure this out.🤝🤝🤝👍👍👍
OK I know you can't see me but JAW DROPPED BIGTIME!!! Had NO idea it was so simple. LOVE my 03' and going to restore it and this helped BIGTIME!!!!!!!!!!!!! THANK YOU!!!!!!!!!!
Doin the same to mine👍👍👍
Good video. Now I can't go wrong getting at and replacing my radio in my old '98 S10. Thanks!
Glad it helped, remember just pull easy and take your time.
Thank you so much for this video !!. I must replace my heater control , so this is very helpful !! Please be safe and God bless you and your family !!!!! Eddy
That helps a lot. My "service engine soon" light went out and I'm pretty sure the flex fuel sensor didn't just magically fix itself so my best guess is that the bulb finally burned out. Call me crazy for wanting that service engine soon light back....but it seems like a good idea to me to have that working properly. Thanks for the informative video. Be well.
Thank you everyone, glad this video helped!!!
Thanks Bentley's! My neighbor has a 2003 Sonoma, older gentleman his gauge cluster is going wonky. Going to pull it for him send it off for a rebuild.
Thanks for the help you guys who post videos like this just don't know how much guys like are so thankful for the videos
this helped me a lot. Thanks brother
Thanks ,great video , my ashtray is broken so I had to remove the basil to get the top screws out of the ashtray to replace it with a used part I bought
Thanks for the video. Replacing my stereo tomorrow!
Wow, thank you that was easy!
Very helpful thanks for video keep up the work 🌹
Helpful video. Thank you very much
Thank you for the informative video. I am getting ready to do this very thing :)
Thanks you helped me, gonna remove mine now !
Thanks, this helped a lot. Just bought an '00 for my son, gotta take this off and remove stickers under the glass that are blocking stuff :)
Oh, and whoever had this before broke the dash, probably taking it off incorrectly to put the stickers in, lol
Big ole THUMBS UP! Thanks.
Your welcome, glad it helped.
Didn't find your video in time. Yup broke mine on the right. I will hopefully get a new one soon.
Thanks man it sure helps me I got to change head light switch
Thanks a lot!. Very helpful video!
Time saver, thanks
Preciate you man
Thanks for the video help me a lot.
Thanks !!!
Great video BTW! 🙌🔎😎 could've used it before I blew mine apart
Thank You.
thank you very much I did put a little break right where you said on the right side I would have never figured it out still afraid it will crack just wanted to check my heater.. thanks
Should have shown how the bottom plug of the Headlight switch comes out... Nobody shows that one. 😁
Thankyou👍🏽
Thank you
Where can I get the retainer clips that hold the dashbezel in place, I can’t seem to find a damm thing or the correct name for them
Excellent!!!!
Thanks for the information really help 👍👍👍
where you can get a new one and the top part too please!
Thanks for the video! It does help!
I think 02 was the switch over from the double din from din &1/2.
(Radio and then a radio in half )
Bravadas were all double din.
So if you do a radio swap to a pre 02 touchscreen use a bravada or a 02+
So, what do the clips look like I have 1 or 2 missing on right side. Bezel rattles when driving. 2000 Jimmy 4x4.
What models had the 4" opening ? Because mine is the 3 and 1/4" opening and I'm planning to put a 6.2" in dash double din tv and wondered why there is a difference in size opening? My vehicle is a 2000 Chevrolet S10 blazer
Do you sell these and how much are they the bezel for four wheel drive S10 LS extended cab 2002 model
It helped me out👍
Thanks!!
Am needing to replace the headlight grounding relay that is behind the light switch area. As it stands, it looks like I will have to stand on my head and look up under the dash towards the front speaker!
Do you have one for a 01 chev blazer
This video is quite useful, may you give me some advices to remove the upper part of the dashboard, Thanks, Marco Fuentes, Guatemala city.
I’m looking for a bezel for a 2002 Chevy S 10 how much
Where can I buy a bezel for a Chevy blazer
I'm in the Bahamas looking to purchase a new or fearly use one mines is broken up
Nice tip on the two different head unit opening sizes. A minor but miserable difference. Why do manufacturers do dumb stuff like this? 🙂I believe the size difference has to do with the style of head unit. Also, and I understand why you cut them to save time, but I always cringe when I see factory harnesses getting cut up. Whatever - but thanks again for the tips on the hidden screws. Would have liked to have seen the plastic tabs on the back of the bezel as well...but maybe next video? Anyway, THANKS!
How do you take that air bag plug out
There is a little orange slide that you have to pull out. After you pull the orange slide, push a flathead screwdriver in the top section. That will put pressure on the tabs, and release the plug with a little bit of pulling. There kind of a pain.
Hi..i need a bezel dash for S10 Chevrolet 2000..do You sell online?
Hope your doing well! Wanted to know what it would be to repair/replace my current dash bezel. I have an 02 blazer ls and I live in FL, needless to say it is cracked to hell. When I first got it my dad and his good old family friend (moron) installed aftermarket speakers and a head unit and they sent it when they took mine off...
Do you sell the dash to a Chevy S10 2002?
How much do them cost
what size is the top screw the one by steering wheel?
7mm is what I use, or you could also use a 9/32s
Where can I find that dash bezel. I need 1 badly
Right now, im all out. For some reason im having a hard time getting them lately.
eBay
I need to remover the plastic cover that is over my parking brake pedal mechanism on my 2001 Sonoma p/u so I can replace it. Can you help?
You dont have to remove it completely. Just take the 4 screws off that are on the front. The pull down from the top to expose tge two screws on the bottom of the bezel. Once you get the 4 screws out 7mm. It will pull down from the top.
I need too remove it all too replace heater core. How do I do that???1
Thats a tough one. Pretty much you have to pull the whole dash back to get to that. Unless there is a secret that i have never seen. I dont have a video on that unfortunately.
So them 2 clips u have to cut the wires they just don’t pop out
I have it on the phone that's replaced the one just broken for a long time
Same for the Isuzu Hombre.
now that i cut the wires to remove the bezel, the switches are not working
Clip install diagram for back of bezel
Need both vents in
Why would you cut those wires??...don't see a need to do all that extra work.... anyway thats a good plastic piece mine just cracked everywhere.....
Are you serious mine broke in half doing this
Mine EXPLODED! 🤣🙌🔎 CHEAP PLASTICS!
IS THERE ANY WHERE TO BUY A NEW BEZEL? 🙌🔎🤷♂️
Im pretty sure all the new ones are discontinued.
@@BENTLEYSAUTOPARTS 🥺 thanks
DO NOT CUT AIR BAG WIRES! It would be so much easier to show someone how to properly remove the wiring plugs than to tell them to hack up thier vehicle. If you slide a flat blade screw driver down into slot on the back of the plug and turn it will release.
If you watched the video, I said to use a screw driver to release that clip. I cut them, since im pulling parts, and try to get as many parts in a short period of time. But yes definitely dont cut any wires while doing yours.