Mercury 6HP Outboard-Test/Demo/Review. Demo of the outboard on the lake mounted to a Panther Mount.

Поделиться
HTML-код
  • Опубликовано: 13 сен 2024

Комментарии • 25

  • @mattwaters6987
    @mattwaters6987 28 дней назад +1

    Nice setup. 🚤👏

  • @ClearviewOutdoors
    @ClearviewOutdoors Год назад +2

    What a great setup and demonstration of the mount and motor, thanks so much for sharing this , I believe you will enjoy this for many years!

    • @maintenancewithmike
      @maintenancewithmike  Год назад +1

      Thanks for the comment, glad to help!
      Many years of enjoyment for sure!

  • @OrangeismyNewGreen
    @OrangeismyNewGreen Год назад +2

    Nice setup Mike 👍🏻. My father-in-law had a Princecraft 167 with a 60hp Merc and a 9.9 Merc for trolling. Nice spot and looks like a big lake 😳. Have a great weekend 👍🏻🙋🏼‍♂🙂🇨🇦

    • @maintenancewithmike
      @maintenancewithmike  Год назад +2

      Yes awesome lake and so peaceful out in the water. Have a good weekend my friend.

  • @EverydayProjects
    @EverydayProjects 7 месяцев назад +4

    I see a padlock on the mount. Please tell me the motor is secured to the boat by this or by a cable. I used to live in Northern BC on an island with boat access only and you'd be surprised how often I 'd hear of someone losing an outboard into the deep because it wasn't secured. The clamps just don't do it. I will enter into a full-time deep prayer on this until I hear back from you. ha Ha Ha

    • @maintenancewithmike
      @maintenancewithmike  7 месяцев назад +1

      You’re absolutely correct but I have both. The handles are padlock and a stainless cable runs through the motor handle and is secured on the inside of the transum to the shipping u bolt. 😉
      This is good for thieves and accidents!
      Thanks for asking and watching!

    • @EverydayProjects
      @EverydayProjects 7 месяцев назад +1

      I can stop praying now....? Good. I was getting out of breath plus I have to go Pottie. LOL@@maintenancewithmike

  • @johnrmcmullin
    @johnrmcmullin 3 месяца назад +1

    Great videos Mike! Do you have a video on how your second fuel line is setup to go to your kicker?

    • @maintenancewithmike
      @maintenancewithmike  3 месяца назад

      Hey thanks for subscribing! I don’t have a video on the fuel connection because each application seamed different and didn’t know if it would be useful information for many. For example I put in a Sierra filter wanting to connect both motors to that filter. The big motor ran fine but the little motor would run out of fuel. What I can tell you if you go this route is the line out of the sierra filter that goes to the kicker motor needs to have an anti- syphon valve in line or it won’t continue to draw fuel. Let me know if this helps. Next time I have the back deck off to change the filter I could put together a quick video for my specific application. Cheers, Mike.

    • @johnrmcmullin
      @johnrmcmullin 3 месяца назад +1

      Thanks Mike. That makes sense! It would be good to see how you set that up. Cheers!

    • @maintenancewithmike
      @maintenancewithmike  3 месяца назад +1

      @@johnrmcmullin most likely will be in the fall when the boat is home and stored in the garage. I’ll add it to my video list. Thanks for the comments! Cheers, Mike.

  • @bolognabowl
    @bolognabowl 5 месяцев назад +2

    Where did you find this servo setup and do you have more videos on it?

    • @maintenancewithmike
      @maintenancewithmike  5 месяцев назад

      I don’t have a video on it yet but I will very soon. I’ll have the parts that I used as well , so stay tuned!

  • @RichardT2112
    @RichardT2112 Год назад +2

    Nice! Do you lift the big engine up to reduce drag?

    • @maintenancewithmike
      @maintenancewithmike  Год назад +1

      I could I guess but I don’t bother, not going to break and speed records with 6HP. Lol.

  • @couellette08
    @couellette08 25 дней назад +1

    Hello. What are you using to control the throttle? Is it a controllking?

    • @maintenancewithmike
      @maintenancewithmike  25 дней назад

      @@couellette08 hello and thanks for stopping by! I built my own setup as the off shelf systems were very expensive and hard to find.
      Here is a link to my video that shows how it works and the parts.
      ruclips.net/video/QgJsrvseg3Q/видео.htmlsi=Hcz5zasu_DVdrqJP

    • @couellette08
      @couellette08 25 дней назад +1

      @maintenancewithmike awesome! Thank you. Looking into putting a 5 or 6 hp mercury kicker on my boat soon.

    • @maintenancewithmike
      @maintenancewithmike  25 дней назад +1

      @@couellette08 the controller works great. Way better than running a whole new throttle assembly from the motor. Let me know if you have any questions while you’re installing it. I’ll try and help out.

  • @theycallmejonny5
    @theycallmejonny5 4 месяца назад +1

    Does this motor shake a lot? Wondering if it shakes your rod tips when you’re trolling.

    • @maintenancewithmike
      @maintenancewithmike  4 месяца назад

      Not really we troll at 1.8 mph and up for rainbow At that speed there is a fairly Decent load at the tip already so you will see the strike and hear the spool run. Great question. Anything else?

    • @theycallmejonny5
      @theycallmejonny5 4 месяца назад +1

      @@maintenancewithmike brand new merc 6hp has a $500 rebate right now so I’m gonna grab one. You convinced me 🤣

    • @maintenancewithmike
      @maintenancewithmike  4 месяца назад

      Nice! You will love it. Sips fuel and can be connected to main tank or the one litre tank built in. Will this be your trolling motor? Are you going to connect it to a main motor for helm steering?