Thanks for sharing. Hope these trifold were available in India. In my place only Brompton is available and you know brome cost a bomb. Hope these Singapore trifold bicycle companies consider opening their shop in India. They would do good business here in India for sure.
@@TutoyzReview_Fiel_Gallardo Looks like, since these are literally clone of Brompton's looks like these companies cannot operate out of Singapore due to they being Brompton clones. Or they may be under some agreements with Brompton that they should not sell outside of Singapore. Definitely Indian market is way too big than Singapore due to the sheer size of India and yes Indian cycling enthusiasts can afford these tri-folds.
I think you could DIY with some modifications to improve the folding. 1) Remove the lower pulley gear but keep the bushing as spacer. 2) Add the 360 tensioner Arm (discard the base) with some modification of the spring (bend one end to hook the Shimano derailleur bracket) and a suitable screw. With this hybrid Shimano/Brompton tensioner, you can remove the bracket on the BB but without chain dropping issues. It like a Brompton.
Compare to pikes and 3 sixty..the body of this is more accurate to the built of brompton... except for ace of fix which is 1 to 1 clone but more expensive with less gear speed so i choose a 10 speed
No... its not there is a proper way how to fold... at first it always happen to me i always bring a small cloth to clean my hands... then i realize the correct way... must be in 5th gear then must fold it in a straight way cannot angle or tilt your bike... folding...
Yes its smooth ... you just need to get the correct setup of ezy wheels... folding at first a bit tricky... bitvwill get ise to it cause need to adjuat geara accprdingly before you fold...
Its more expensive and its more brompton accurate as per frame welding which is sqaurish and triangle frame having circle holes... compare to a pikes or 3sixty the are all round welding on frames Nd the triangle frame for pikes have triangle openings..and some more this is using 10speed shimano tiagra... which if u use to upgrade to a real brompton will cost u more than 1k dollars...
That is so tiny you could almost carry it in your back pack. Could you please tell me if ANY of the Brompton clones are good quality? From Bike Forums I have visited there is obviously a snob factor in the Brompton but my outlook is I want the best value for my hard earned dollars but I don't want cheap crap that will fall apart. Thank you.
For me this bike is worth the bucks most specially the gearing system... dont worry about the snob having the original bromptons... its the rider that makes the bikes not the bike... i also own a brompton but for me this bike makes mor sense with regards to speed style and cost... im sure rhose brompton owners also want to get a hold on to one of this so they can realized how overpriced a brompton is...
@@TutoyzReview_Fiel_Gallardo I shopped for a year before I committed to a Brompton. I never came across this specific bike though! Thank you for the videos. I'm still looking to get a second to have a spare but I cannot afford a Brompton as a spare bike 😅. I have absorbed hundreds of videos and I thought at this point there is no more Brompton related content on RUclips... Then this month old video is suggested... anyway, I was looking to try to get a Litepro clone shipped here (US) but I saw two different videos on RUclips that they were delivered with rust on them already. One was on the seat clamp and the other one I think was on the lower frame near the bottom bracket... it seems litepro don't take the time to prep before they paint their frames, but at least the brazing looked excellent in comparison to some other clones. I think it depends on where you're at if you can get your hands on one, inspect it really well and make sure all the joints look like they have good, smooth braising, not gobbed on stuff that doesn't really have any strength, I'd go for it. I just worried the quality-control isn't there and some of these videos are made on Prime examples not the stuff they would ship to me in the US. There are horror stories of Brompton clones breaking at the brazing at the steering tube 😬 This style bike with the single tube frame really needs to have good braising so they don't collapse when you least expect it.
Great version of trifold by crius to do it in 10 speed
Wow 10 speed this is awesome
Thanks for sharing. Hope these trifold were available in India. In my place only Brompton is available and you know brome cost a bomb.
Hope these Singapore trifold bicycle companies consider opening their shop in India. They would do good business here in India for sure.
Yes i hope so my friend, so most of us can enjoy riding this types of bikes for a more reasonable price...
@@TutoyzReview_Fiel_Gallardo Looks like, since these are literally clone of Brompton's looks like these companies cannot operate out of Singapore due to they being Brompton clones.
Or they may be under some agreements with Brompton that they should not sell outside of Singapore.
Definitely Indian market is way too big than Singapore due to the sheer size of India and yes Indian cycling enthusiasts can afford these tri-folds.
I think you could DIY with some modifications to improve the folding. 1) Remove the lower pulley gear but keep the bushing as spacer. 2) Add the 360 tensioner Arm (discard the base) with some modification of the spring (bend one end to hook the Shimano derailleur bracket) and a suitable screw. With this hybrid Shimano/Brompton tensioner, you can remove the bracket on the BB but without chain dropping issues. It like a Brompton.
where did you buy bro?
whats the brand of your seat?
Bro does your come with chain guard to prevent drop chain when folded ? Mine come with this guard and everytime I fold it will scratch the rear frame.
No did not need to buy those chain guard cover i just diy a pice of leather and wrap it on
Champion
How much you paid for the upgrading?
Hi, do you encounter folding issue? Folding and unfold the rear brake jam ?
Yes... i have a video tutorial on how to avoid this...
Hi what size chainring did you change too?
May I know why do you choose this external 10s Trifold instead of the Pikes/360 Internal hub or even Aceoffix 4speed brand?
more speed
@@ohmingfeng9351 besides speed? What about the build quality?
Compare to pikes and 3 sixty..the body of this is more accurate to the built of brompton... except for ace of fix which is 1 to 1 clone but more expensive with less gear speed so i choose a 10 speed
@@nelsonngu i have a bi fold and i cant live without 9 speeds or more haha, but its up to your preference
Nice bike , Love trifold bike 🔥
Yes its very useful
@@TutoyzReview_Fiel_Gallardo yes indeed
Bitte mehr davon !
Thanks for the review. Ride safe always sir.
Ride safe also my friend
Do they have an electrique version ?
No dont have but you can buy those pedal or speed assist engine which they install seperately for this types of bikes
good day, do you shipped to canada? thanks . I am interested in cruise trifold 10 speed
Hi... im not actually a bike shop... but this bike is posted at fb market facebook.com/marketplace/item/990472388516770/
@@TutoyzReview_Fiel_Gallardo thanks
To your knowledge, do you know if it's possible to get a front fork with disc brake tabs for use with a disc brake?
For folding its a 2 different type of fork
Seems the lower jockey wheel on the rear derailleur is way too close to the ground?
Your correct need to upgrade to the short version... so far never hits anything in a flat road cause i never use it on a light trails...
Good job❤
kaya po nito magfit ng 12speed? shimano deore m6100 to be specific
where to buy this one?
Im selling mine...lol...see my otjer video for the latest upgrades
Hindi talaga kasing compact ung fold compared sa mga brompton at 3sixty? dahil siguro sa rear triangle frame design?
Same and compact but just a bit more tricky to fold
And folding the rear frame will get scratches and paint chip off.
No scratch
I heard that the chain will drop on this model when folding. Is that true?
No... its not there is a proper way how to fold... at first it always happen to me i always bring a small cloth to clean my hands... then i realize the correct way... must be in 5th gear then must fold it in a straight way cannot angle or tilt your bike... folding...
Maybe next time i make and show on a video the proper way to fold...
Where did u buy from?
Bought it from oveseas...singapore
Pwede ba to e upgrade using Brompton parts? Like Joseph Kuosac rims?
Pwede sir... kaso bka mas mahal pa un rim mo s bike...lol
@@TutoyzReview_Fiel_Gallardo Hahahaha agree, salamat sir. Ayos tong bike nato
does the chain fall out easily when you cycle or fold the bike?
No it doesnt
Watch my proper way to fold video there is a trick to it
Thanks for this video. I'm keen in this trifold external gears concept. Just wondering is it smooth when folded and going on trolley mode?
Yes its smooth ... you just need to get the correct setup of ezy wheels... folding at first a bit tricky... bitvwill get ise to it cause need to adjuat geara accprdingly before you fold...
Bro which shop you went for your upgrade and where to buy this brand bicycle tks
nice bike! what's the weight? noticed you had LitePro parts...
Currently it is now about 9.5 kg after removing the rack and changing the front wheel to tri spoke as seen on my other vid
Bro what frame is this?
Crius base
i think this is cheaper compare to the 3sixty?
Its more expensive and its more brompton accurate as per frame welding which is sqaurish and triangle frame having circle holes... compare to a pikes or 3sixty the are all round welding on frames Nd the triangle frame for pikes have triangle openings..and some more this is using 10speed shimano tiagra... which if u use to upgrade to a real brompton will cost u more than 1k dollars...
fold like a Brompton, But build quality of the bike, feel cheap.
How is the max load this bike can take?
It should be about 120kg...
Ganda ng bike mo. Saan nakakabili nyan at magkano. Thank you
Selling mine see my other vid for the latest upgrades
Nice build! The back triangle is the same as brompton or clones?
Its almost same as brompton with round holes but bended to make it wider to put in 10 external gears
@@TutoyzReview_Fiel_Gallardo Did you have to spread the rear stays?
Very nice video.Are you based from the Philippines?
Thanks...Yes bro in ph
Tingin din ako sa sg. Sa overall quality ng paint frame welding, anu mas ok pikes or crius trifold?
Para sa akin...Crius sir kse mas brompton accurate sya pati un welding sa frame square
Salamat sir
That is so tiny you could almost carry it in your back pack. Could you please tell me if ANY of the Brompton clones are good quality? From Bike Forums I have visited there is obviously a snob factor in the Brompton but my outlook is I want the best value for my hard earned dollars but I don't want cheap crap that will fall apart. Thank you.
For me this bike is worth the bucks most specially the gearing system... dont worry about the snob having the original bromptons... its the rider that makes the bikes not the bike... i also own a brompton but for me this bike makes mor sense with regards to speed style and cost... im sure rhose brompton owners also want to get a hold on to one of this so they can realized how overpriced a brompton is...
@@TutoyzReview_Fiel_Gallardo I shopped for a year before I committed to a Brompton. I never came across this specific bike though! Thank you for the videos. I'm still looking to get a second to have a spare but I cannot afford a Brompton as a spare bike 😅. I have absorbed hundreds of videos and I thought at this point there is no more Brompton related content on RUclips... Then this month old video is suggested... anyway, I was looking to try to get a Litepro clone shipped here (US) but I saw two different videos on RUclips that they were delivered with rust on them already. One was on the seat clamp and the other one I think was on the lower frame near the bottom bracket... it seems litepro don't take the time to prep before they paint their frames, but at least the brazing looked excellent in comparison to some other clones.
I think it depends on where you're at if you can get your hands on one, inspect it really well and make sure all the joints look like they have good, smooth braising, not gobbed on stuff that doesn't really have any strength, I'd go for it. I just worried the quality-control isn't there and some of these videos are made on Prime examples not the stuff they would ship to me in the US. There are horror stories of Brompton clones breaking at the brazing at the steering tube 😬
This style bike with the single tube frame really needs to have good braising so they don't collapse when you least expect it.
The frame is Aluminium or chrome moly? Tks
Chromonly
nice upgrade!!!
what' d latest weight?
9.5kg
anung name ng bike shop
Cyclelogic sg
sir di ba mahirap ifold?
Madali lng just need to make sure un chain is not too losse kase na dederail sya minsan... need sime adjustments
😆😄😅