Great step by step instruction. Thank you for taking the time to share. I bought a soft top OBX for my daughter in November. We are waiting for the weather to be nice enough to remove the top.
One thing she missed was the top of the side windows at the back door. You must put the window under the wire at the top when you push the clips in. You’ll know what I’m talking about as soon as you realize that the very top won’t go under the roof snug! I’m 5’1” and clipping that back window is the hardest part of the whole process for me. And also, make sure before putting them back on, you let the sun warm them up! Helps stretch it to close it off with the back window! Dealership had to help me out once and told me to do this from now on! It works!
Thank you for a great video! Great education right here. I ordered a Badlands with the Sasquatch package which has a hard top. I was fortunate enough to purchase an outer banks just a few weeks ago with a soft top while I wait for my order. Someone had backed out of their special order and the option to buy it was there so I did. Especially not knowing when my order would be built I figured it would be fun to get a soft top for the time being. Wouldn’t you know a week later I get a production notice for week of 09/26. Yay! So I have been learning a lot about the broncos. And I’m in love.
Thanks for watching Cathy! Our second one is also a hard top and it is scheduled for production this week but I am not going to hold my breath. You should be able to unload the OBX no problem.
Truly appreciate your instructional video. I just got my sweet ride delivered and it’s so fun to drive with the top off! We are having a lot of afternoon showers so I am going to opt to just take the top down to the mid point for now. I’m so thankful for finding your video so I don’t break my new baby! The nice manicure made me feel I could do this too! Thx a ton!
I just got the VIN for my '22 Bronco - yee haw! lol Great to see quality videos on how to operate things. Looks like these windows are way easier to take on/off than the zippered up Wranglers! Thanks for the great video!
Absolutely perfect. Exactly the way I do it -- not that there's many different ways to do it. I wondered if you would have the extra tip about getting the side panel back in. It takes a nice hard push to get that bottom corner in, but the rest of it easily locks in. And I don't have any roll bar scratches either. If you lift straight up (instead of up and toward the front of the car), you won't get any contact. And while it seems like a lot of work because you're showing all the step by step, it really only takes a couple of minutes.
Thanks for watching, Mike! My wife said that she had never experienced that issue with the side panels but people on the forums say that if you lay them flat out in the sun, they are more pliable.
Great video! I was able to lower the top last week, left it down until today! Next up, slide the rear and side windows in after work. You made it look easy, big thanks!
I appreciate her explaining while having that fresh Mani 😅 but also appreciate explaining and suggesting how to be careful with it. (Especially for us ladies) Thanks queen!
You should definitely look into the IAG lift supports. I've installed a few sets on customers vehicles and they love them. Waiting for my set to come in so I can install when I swap to my soft top.
Sadly I scratched my pillar on the driver's side and could not getting it back up either. I took it to the dealership. I was sorry bummed I scratched it but didn't watch a video before I put it back up. Great video. Thank you
Thank you for the video it’s very informative! I get our Bronco this afternoon! If you’re going to put the top open on the first open position, can you do it without removing the back panel and side panels off?
With any luck I am about to purchase a 2022 convertible bronco. leaning toward the soft top but afraid I may miss out on the hard top. Do you have the hard top option or just the soft? We have a Jeep so I understand the sound difference inside soft vs hard top But I love the ease of the soft top.
We just traded this one for a ‘22 OBX hard top because you still can not purchase a hard top from Ford but you can buy a soft top after the fact. My wife likes the soft top better, so if we still have this one come spring, we will buy the soft top. Good luck, I hope you get it!
Here is all my Bronco content, thanks for watching! ruclips.net/video/GzYLRNAkP6c/видео.html ruclips.net/video/U83p8Io79y4/видео.html ruclips.net/video/P8VpxWWQ4Lk/видео.html ruclips.net/video/gm82GHOMU3I/видео.html ruclips.net/video/2lsD5lGfjc0/видео.html ruclips.net/video/7ppOOdA-aS8/видео.html ruclips.net/video/6X59f85slt8/видео.html ruclips.net/video/afC_jdRtjP0/видео.html
Hey Brian. Looks like the wife is taking over your channel. She looks comfortable making vids. Hoping that the only time we see you is not only during auto vlogs vids. 😂
So I see u put the back 2 side panel/windows in the trunk but does the back window panel fit in the trunk ? Curious if all 3 removable window panels fit in the trunk so u can bring them with u .
Do you do anything with the weatherstripping on the sides of the soft top about the door windows? It seems like it should hook somehow and not be loose. You can stick your hand between the layers.
Yes, you can reach your hand through. There is nothing additional to latch on the sides, except for where the hinges are to put it in the half back position. Thanks for watching!
It “should” we have never had a problem but they are recommended for highway speeds and off-roading. You can buy some double sided Velcro and it will do the exact same thing. Thanks for watching!
Just a thought, can you do a tour of Pittsburgh power , and do a test on max milage on the Ford eco boost 6 , they are stating that It keeps the carbon build up till nothing. Pittsburgh power was on Sirius radio till Kevin Rutherford said something to get taken of the radio. So they probably would love to get onto other platforms
I am not sure what Pittsburgh power is. For some reason, I can get up to 23 mpg out of my ‘21 super crew F150 with the 2.7L but the best the Bronco has done, with the same engine is only 16.3 on the highway
So far what is your experience with new big tires and wheels ?im planning to put also 35 inch wheels on my outer banks stock bronco wanna know your overall experience with it. Greatly appreciate it.How’s that fuel economy per gallon with the big tires?
The fuel economy went down considerably and they make a lot of noise. I am considering looking for a lighter weight tire. It’s gets around 16 mpg city and highway combined. He is a video explaining the install process. Thanks for watching! ruclips.net/video/gm82GHOMU3I/видео.html
FYI I just attempted 0mm offset with 35" K02s and they DO NOT FIT without the offset. Not a big deal for me as I already had a lift planned but thought I'd let you know.
is there anything we need to do along the sides when the cover is back on where the window meets the soft top? it looks like its just laying there does the soft top need to be secured along a track above the doors or just try our best to keep it laying flat?
Hi Robbie, no, above the door there is nothing to attach to. When you push the latch on the inside, that pulls the top down and presses the seal tight. Above all of the plastic windows there is Velcro that you need to be sure that you attach the whole way around.
Is this the retractable soft top? or is this the reg soft top? I am looking to order a Bronco, and wondering if the retractable upgrade is worth the extra funds?
Hi - another question- when I put the top back on and latched it, it appears the edge of the top that runs along the driver and passenger doors isn’t sealed correctly. It’s like I can lift the edge up easily and I don’t remember it being that way before. This is the first time lowering it. Is this normal? I reopened it and closed to see if the first time it didn’t seal correctly but same thing - thank you
Thanks! I wanted to get the hard top but she wanted to soft. I figured if we bought one with a soft top we could always buy hardtop later but they are still unavailable from Ford. I do have a new bronco with a Hardtop on order but it has no scheduled build date yet.
Please Reach out to me. I am 5’2 so I am not sure if I can reach that high. Plus how hard do you think it would be for me? I’ll keep watching the video over and over. I have long nails as well.
My wife is 5’5” and she could do it no problem standing on the running boards. If you don’t have any kind of step bars, you may need a small stool to reach. Thanks for watching!
Seems your top goes all the way back, and folds up over spare tire. I see the Besttop doesn’t seem to fold back that far? Is this a different top? If yes, where can it be bought as the Ford accessory tops appear to be the Bestop ones.
Yes, you can buy the factory soft top from the dealer. You just have to specify that you want the factory one and not the best top. My wife said there are a lot of people selling their factory soft tops on the Bronco forms, new in the box.
Your video was great. However raising my soft top has never (not once) gone as smoothly as yours did. I’m very gentle but it’s almost like mine does not want to lift correctly. Not sure what gives.
Hi Lee - not sure what would be causing an issue raising it besides something being misaligned. Does it hit/scrape any of the bars in the when trying to put it up?
@@ayanaakarie ruclips.net/video/gm82GHOMU3I/видео.htmlsi=bCCbwlL6x1cAu00G here is a link with all the information. Let me know if you have any other questions.
I noticed that when I have my top down the passeger side of the top does not lock flush. So when I'm driving it rattles. I noticed there is a pad for that part or the frame sits on and my passenger side the frame is not sittng on the pad which is causing the rattle. When my top is up there is a rattle with the cross support that is inbetween the front and backseat. Any suggestions as to what needs to be fixed or what I can do to fix this myself
Is it normal for it not to click/not latch like yours did at 6:38 when putting the top back on? Seems like my soft top is just a tad too far back when I’m putting it back on, but I’m still able to get it closed all the way🤔
It should click immediately when you drop it into the channel. You can get your top adjusted at the dealership. Basically the bracket can slide forward and back until it clicks without a problem.
Well, you just talked me out of a new Bronco (not like there are any available anyway)... Love the look, but that's like setting up/taking down a tent every time you wanna go topless. Guess I'm too used to pushing a button and 20 seconds later tops down--I can even lower/raise it driving up to 30 mph.
My wife loved this Bronco and didn’t seem to mind putting the top down. We ended up trading this one in on a hard top and she didn’t like it as much Then we traded that on a new MDX. Not sure why Ford can’t get this right, now they are offering people with existing Bronco orders $2500 not to buy it.
Very helpful and the MOST important part of this is being able to do this alone and retaining your MANICURE!!! Big win :)
Lol, thanks for watching!
I can't even get my wife to vacuum.
Lol! She has done all the mods so far, wheels, exhaust and a oil change (with my help)
Great step by step instruction. Thank you for taking the time to share. I bought a soft top OBX for my daughter in November. We are waiting for the weather to be nice enough to remove the top.
Thanks for watching Larry!
One thing she missed was the top of the side windows at the back door. You must put the window under the wire at the top when you push the clips in. You’ll know what I’m talking about as soon as you realize that the very top won’t go under the roof snug!
I’m 5’1” and clipping that back window is the hardest part of the whole process for me. And also, make sure before putting them back on, you let the sun warm them up! Helps stretch it to close it off with the back window! Dealership had to help me out once and told me to do this from now on! It works!
Thank you for a great video! Great education right here. I ordered a Badlands with the Sasquatch package which has a hard top. I was fortunate enough to purchase an outer banks just a few weeks ago with a soft top while I wait for my order. Someone had backed out of their special order and the option to buy it was there so I did. Especially not knowing when my order would be built I figured it would be fun to get a soft top for the time being. Wouldn’t you know a week later I get a production notice for week of 09/26. Yay! So I have been learning a lot about the broncos. And I’m in love.
Thanks for watching Cathy! Our second one is also a hard top and it is scheduled for production this week but I am not going to hold my breath. You should be able to unload the OBX no problem.
Nice mom's voice "do not slam this" "set it down gently" you are younger but you had me 😂
LOL Thanks for watching!
Truly appreciate your instructional video. I just got my sweet ride delivered and it’s so fun to drive with the top off! We are having a lot of afternoon showers so I am going to opt to just take the top down to the mid point for now. I’m so thankful for finding your video so I don’t break my new baby! The nice manicure made me feel I could do this too! Thx a ton!
Congratulations on the new Bronco! Thanks for watching.
Awesome presentation. Very informative with tons of great suggestions and tips. You are a natural! Thanks for providing this great job!
Thanks for watching!
Thank you for this great video tutorial. I successfully got my soft top down on my outer banks for the first time today & had a very enjoyable ride.
Glad to hear that! Thanks for watching.
Very clear and systematic explanation! Thank you!
Thanks for watching!
My hero! Easiest instructions I’ve seen! 🙌🏼🙌🏼👏🏼👏🏼
Glad it helped!
I just got the VIN for my '22 Bronco - yee haw! lol Great to see quality videos on how to operate things. Looks like these windows are way easier to take on/off than the zippered up Wranglers! Thanks for the great video!
That's awesome! How long ago did you order it? I ordered another one in the beginning of January but no scheduled build date yet. Thanks for watching!
Awesome Video , got home late had to do it in the dark. Your tricks on the side panels saved me. Thank you
Glad we could help, thanks for watching!
Another great video. 👍 that Bronco is sweet! Our old Wrangler's rusted shut with the zippered soft top. This is much better for surviving winters.
Thanks for watching Melanie!!
video has literally been a life saver and love love love that your wife did this solo!
Fantastic, thanks for watching!!
THIS GUY LITERALLY HAS THE BEST LOOKING HANDS I HAVE EVER SEEN ON RUclips!!!
Lolololololololololololololololololol
Best soft top video I have seen. Thank You so much!
I am glad you liked it, thanks for watching!
Thank you so much for this tutorial!!! Beyond helpful!!!
Thanks for watching!!
Absolutely perfect. Exactly the way I do it -- not that there's many different ways to do it. I wondered if you would have the extra tip about getting the side panel back in. It takes a nice hard push to get that bottom corner in, but the rest of it easily locks in. And I don't have any roll bar scratches either. If you lift straight up (instead of up and toward the front of the car), you won't get any contact. And while it seems like a lot of work because you're showing all the step by step, it really only takes a couple of minutes.
Thanks for watching, Mike! My wife said that she had never experienced that issue with the side panels but people on the forums say that if you lay them flat out in the sun, they are more pliable.
Great video! I was able to lower the top last week, left it down until today! Next up, slide the rear and side windows in after work. You made it look easy, big thanks!
Thanks for watching!
Thank you just got one used!! Right to the point!!! Appreciate it!!!
Congratulations on the Bronco!
Very helpful - methodical video - Thank you!
Thanks for watching!
Thanks! very good information. I saved it so I can watch it again!
Thanks Jeff!
I appreciate her explaining while having that fresh Mani 😅 but also appreciate explaining and suggesting how to be careful with it. (Especially for us ladies) Thanks queen!
Glad we could help, thanks for watching!!
Thanks! Just got my Bronco soft top today--no manual!
Thanks for watching and congratulations!!
I would try spraying the Rubber and the slide channels with silicone so they slide easier
Interesting video. Being careful is the key
Thanks for watching, Randy!
Thank you so much, very informative 😊
Thanks for watching!
You should definitely look into the IAG lift supports. I've installed a few sets on customers vehicles and they love them. Waiting for my set to come in so I can install when I swap to my soft top.
Thanks for the tip John, I didn’t even know those existed.
excellent demonstration.
Thanks for watching!
Sadly I scratched my pillar on the driver's side and could not getting it back up either. I took it to the dealership. I was sorry bummed I scratched it but didn't watch a video before I put it back up. Great video. Thank you
Sorry to hear that! Glad the video helped!
Well done. Thank you!
So glad I was able to get my Bronco Sasquatch with a hard top. This seems like a process just to get the top off.
It’s really not that hard. We did end up trading this on in on a ‘22 hardtop, much to my wife’s dismay.
Thank you for sharing this video!
Thanks for watching!
This is brilliant. Thank you!
Thanks for watching!
Nicely done guys.
Thanks for watching!
Awesome video. Saved for when I take off in the summer. PS - Go Steelers
Thanks for watching!
Thanks so much. Just got one... Now I know how. Seems like alot of work... I'm lazy
Congratulations on the Bronco and thanks for watching!
Thank you for this !!!
Thanks for watching!
Great Video... Very informative...
Thanks for watching!
Thanks. great video.
Thanks for watching!
Thank you for saving me hours.
Happy to help!
Video is very helpful and well done
Thank you and thanks for watching!
that's a beautiful Bronco
Thank you!!
Repairs will be fun
Great video. Thank you.
Thanks for watching!
Great video!
Thanks for watching!
Awesome 👏🏼 and did it with nails 💅🏼 on 😎
Thank you 🤗
tks a lot 4 the info
it Will help a lot
Thanks for watching!
Like your opening theme beats 🎧 🎶
Thanks!
Thank you!
Thanks for watching!
Thank you for the video it’s very informative! I get our Bronco this afternoon! If you’re going to put the top open on the first open position, can you do it without removing the back panel and side panels off?
Congratulations on the bronco and thanks for watching! Yes, you can do that.
Pretty impressive with those nails.
Your wife is a champ! Great video
She is! Thanks for watching
Nice color beautiful car
Thanks, she absolutely loves it!
The process isn’t too difficult, but I have to commend Jeep with how the JL soft top works. It’s even easier than this lol
Thank you so much we were scared take the top back
Gald we could help!
I love it beautiful
Thanks for watching!
Very good Demo! Brian how good is the engine in that car? Please make more videos!
Thanks, I like the engine. We have had 3 vehicles with the 2.7L no problems and my F150 gets 21 mpg.
With any luck I am about to purchase a 2022 convertible bronco. leaning toward the soft top but afraid I may miss out on the hard top. Do you have the hard top option or just the soft? We have a Jeep so I understand the sound difference inside soft vs hard top But I love the ease of the soft top.
We just traded this one for a ‘22 OBX hard top because you still can not purchase a hard top from Ford but you can buy a soft top after the fact. My wife likes the soft top better, so if we still have this one come spring, we will buy the soft top. Good luck, I hope you get it!
very good video what's so great about this bronco can you do a review plz
Here is all my Bronco content, thanks for watching!
ruclips.net/video/GzYLRNAkP6c/видео.html
ruclips.net/video/U83p8Io79y4/видео.html
ruclips.net/video/P8VpxWWQ4Lk/видео.html
ruclips.net/video/gm82GHOMU3I/видео.html
ruclips.net/video/2lsD5lGfjc0/видео.html
ruclips.net/video/7ppOOdA-aS8/видео.html
ruclips.net/video/6X59f85slt8/видео.html
ruclips.net/video/afC_jdRtjP0/видео.html
I definitely wouldn’t want to have to do it in the event of a sudden downpour, but it seems fairly well designed overall.
Yah, that would be a real pain!
Hey Brian. Looks like the wife is taking over your channel. She looks comfortable making vids. Hoping that the only time we see you is not only during auto vlogs vids. 😂
LOL, she really does do a good job and she knows way more about her Bronco than I do!
You got a handy woman there.
I got lucky, she is pretty much good at everything.
So I see u put the back 2 side panel/windows in the trunk but does the back window panel fit in the trunk ? Curious if all 3 removable window panels fit in the trunk so u can bring them with u .
You can fit the back window in too. It is tight and you have to bend it slightly but will not affect the window itself.
Do you do anything with the weatherstripping on the sides of the soft top about the door windows? It seems like it should hook somehow and not be loose. You can stick your hand between the layers.
Yes, you can reach your hand through. There is nothing additional to latch on the sides, except for where the hinges are to put it in the half back position. Thanks for watching!
Great video, do yall have a lift on that
Thanks for watching! No lift, just had to remove the crash bars to fit the 35s
Do think there are any lubes that could be used in the rear tracck to make the rear window sliide in more smoothly?
I would try a little silicone spray if anything.
Hi - when the top is half way back will it stay in place without the velcro straps? I didn’t get any straps with mine. - thanks
It “should” we have never had a problem but they are recommended for highway speeds and off-roading. You can buy some double sided Velcro and it will do the exact same thing. Thanks for watching!
Just a thought, can you do a tour of Pittsburgh power , and do a test on max milage on the Ford eco boost 6 , they are stating that It keeps the carbon build up till nothing. Pittsburgh power was on Sirius radio till Kevin Rutherford said something to get taken of the radio. So they probably would love to get onto other platforms
I am not sure what Pittsburgh power is. For some reason, I can get up to 23 mpg out of my ‘21 super crew F150 with the 2.7L but the best the Bronco has done, with the same engine is only 16.3 on the highway
Pittsburgh power is a heavy truck repair shop
So far what is your experience with new big tires and wheels ?im planning to put also 35 inch wheels on my outer banks stock bronco wanna know your overall experience with it. Greatly appreciate it.How’s that fuel economy per gallon with the big tires?
The fuel economy went down considerably and they make a lot of noise. I am considering looking for a lighter weight tire. It’s gets around 16 mpg city and highway combined. He is a video explaining the install process. Thanks for watching!
ruclips.net/video/gm82GHOMU3I/видео.html
FYI I just attempted 0mm offset with 35" K02s and they DO NOT FIT without the offset. Not a big deal for me as I already had a lift planned but thought I'd let you know.
is there anything we need to do along the sides when the cover is back on where the window meets the soft top? it looks like its just laying there does the soft top need to be secured along a track above the doors or just try our best to keep it laying flat?
Hi Robbie, no, above the door there is nothing to attach to. When you push the latch on the inside, that pulls the top down and presses the seal tight. Above all of the plastic windows there is Velcro that you need to be sure that you attach the whole way around.
We have a Badlands that came on 33s did you do a lift to get 35s on? We would like 35s but don’t really want a lift.
No lift! Watch this one, it explains everything.
This makes me want to get the hard top
Much to my wife’s dismay, we traded this in on a hard top.
ruclips.net/video/DQEZqRLYNGY/видео.html
very nice hands
Lol, thanks
New Bronco owner here. Dumb question: how do you keep the tailgate window open when the soft top is on?
You have to just take the panel off the back.
What tires and wheels did you put on this? They look really sharp.
Thanks! Kenda Klever tires and Fuel Shok wheels.
ruclips.net/video/gm82GHOMU3I/видео.html
What trim is your bronco? Nice car
Outer Banks with the lux package, thanks!
Is this the retractable soft top? or is this the reg soft top? I am looking to order a Bronco, and wondering if the retractable upgrade is worth the extra funds?
This is just the regular soft top. I don't think the $2,400 upcharge would be worth it.
How much for the upgraded wheels and tires? Ford charges a lot for the Sasquatch and you don’t have any wheel options.
$3800
Do we have to remove all the side and rear panels? Just to pit the top back
Half back no, all the way back, yes.
Hi - another question- when I put the top back on and latched it, it appears the edge of the top that runs along the driver and passenger doors isn’t sealed correctly. It’s like I can lift the edge up easily and I don’t remember it being that way before. This is the first time lowering it. Is this normal? I reopened it and closed to see if the first time it didn’t seal correctly but same thing - thank you
Hello, we have not experienced that issue. Just make sure the mid latches are secure when lowering the top.
Ok thanks
Very nice demonstration but it seems like a lot of steps to me. I think I would go with a hard top unless they ever made a power top 😁
Thanks! I wanted to get the hard top but she wanted to soft. I figured if we bought one with a soft top we could always buy hardtop later but they are still unavailable from Ford. I do have a new bronco with a Hardtop on order but it has no scheduled build date yet.
Once you've done it a few times, it comes off in one minute and you can put it back on in two minutes.
Please
Reach out to me. I am 5’2 so I am not sure if I can reach that high. Plus how hard do you think it would be for me? I’ll keep watching the video over and over. I have long nails as well.
My wife is 5’5” and she could do it no problem standing on the running boards. If you don’t have any kind of step bars, you may need a small stool to reach. Thanks for watching!
Can you just remove the back window without removing side windows ? like if your transporting long pieces of lumber for example .?
Yes
Seems your top goes all the way back, and folds up over spare tire. I see the Besttop doesn’t seem to fold back that far? Is this a different top? If yes, where can it be bought as the Ford accessory tops appear to be the Bestop ones.
Yes, you can buy the factory soft top from the dealer. You just have to specify that you want the factory one and not the best top. My wife said there are a lot of people selling their factory soft tops on the Bronco forms, new in the box.
Can you drive with it just half down? I have one and don’t always want it fully down.
You sure can! Make sure you use the velcro steps on the highway.
Your video was great. However raising my soft top has never (not once) gone as smoothly as yours did. I’m very gentle but it’s almost like mine does not want to lift correctly. Not sure what gives.
Hi Lee - not sure what would be causing an issue raising it besides something being misaligned. Does it hit/scrape any of the bars in the when trying to put it up?
tire and wheel link? do you have a lift?
Check this video out!
ruclips.net/video/gm82GHOMU3I/видео.html
What color bronco is this? And what is the name of the wheels? Love this look!
Thanks! It’s called Cactus Grey and the wheels are Fuel Shok.
Thanks for the info! One last question, what are the tires called?
@@ayanaakarie ruclips.net/video/gm82GHOMU3I/видео.htmlsi=bCCbwlL6x1cAu00G here is a link with all the information. Let me know if you have any other questions.
Thank you so much!!
I noticed that when I have my top down the passeger side of the top does not lock flush. So when I'm driving it rattles. I noticed there is a pad for that part or the frame sits on and my passenger side the frame is not sittng on the pad which is causing the rattle. When my top is up there is a rattle with the cross support that is inbetween the front and backseat. Any suggestions as to what needs to be fixed or what I can do to fix this myself
It sounds like the frame may be bent.
@@PIPSBURGHVIEWS I hope not I just bought it
Is it normal for it not to click/not latch like yours did at 6:38 when putting the top back on? Seems like my soft top is just a tad too far back when I’m putting it back on, but I’m still able to get it closed all the way🤔
It should click immediately when you drop it into the channel. You can get your top adjusted at the dealership. Basically the bracket can slide forward and back until it clicks without a problem.
Is it ok to drive with the top up but the side and back windows removed?
Yes, it is.
very cool demonstration but I would definitely be getting the hard top seems like less work
Thanks! I assumed we would be able to buy a hard top from Ford by now but no luck yet.
@@PIPSBURGHVIEWS that's crazy that this Supply chain back up is still this bad
@@bigsmith7349 I agree, I ordered another Bronco at the beginning of January and there is still no scheduled build date.
@@PIPSBURGHVIEWS that's insane
Hi! Can I please know what kind of tires you have?? Size and brand
Kenda Klever RT 35/12.50/18
Do you have any tire rubbing when turning sharp?
What is that wheel and tire setup ?
This explains everything.
ruclips.net/video/gm82GHOMU3I/видео.html
yikes, not sure the side trays for the windows will hold in time if removed often the way it was engineered
You may be right but it’s so early to tell. No complaints on the forums yet.
Brian. I see autovlog is getting a new truck. Is it a trx? Hint hint. 🤫 ????
I rode in whatever it was yesterday and it was fast!
@@PIPSBURGHVIEWS that answers my question thank you 👍
At least no motor or hydraulic oil windows
How can i buy this softtop? Can i get link that i buy it?
You have to contact your local Ford Dealer and tell them you want the factory soft top.
Well, you just talked me out of a new Bronco (not like there are any available anyway)... Love the look, but that's like setting up/taking down a tent every time you wanna go topless. Guess I'm too used to pushing a button and 20 seconds later tops down--I can even lower/raise it driving up to 30 mph.
My wife loved this Bronco and didn’t seem to mind putting the top down. We ended up trading this one in on a hard top and she didn’t like it as much Then we traded that on a new MDX. Not sure why Ford can’t get this right, now they are offering people with existing Bronco orders $2500 not to buy it.