Best Audio Settings for PS5 in 2024: ruclips.net/video/TDOXnkn1-yE/видео.html Check my new channel: www.youtube.com/@DanialZHProMax Do you like to support me? ruclips.net/channel/UCzoK... Discord Server: discord.com/invite/ykkWZGrV29 Telegram Channel: t.me/Danielzh1
absolutely great video thank you for these tests i was using 1080p because i thought it would use less power and have less lag but now i switched to 4k after watching thank you!!! 🔥
Also wanted you thank you for making these videos. There is no one else doing these types of tests even though so many people could benefit from it. Looking forward to your next video ❤
pls make the same for Fortnite I think it is one of the only games that you can play competitively with PC games and have good results, in addition to being the most popular game. It will definitely be a very watched video or perhaps a video to know how to get the most out of our console to obtain less fps drops along with a good input lag either of these two videos would be great, keep up your good work
Great idea , a general settings will help a lot, maybe for ex desactivate this options and it will help with performance like HDCP for example or turn off bluetooth and other things that he will discover. Hope to see this . I playe competitive fortnite also and ps5 sometimes is imposible to play in lobbys that are too stacked
Thanks for the idea, as most of this channel's audiences are general I try to focus on general topics and COD has given good results so far, however, I may try a full video for Fortnite in the future and see if it works. because it requires a lot of time.
Something is wrong.. higher resolution shouldn't give you less input lag, firstly because you'll probably have less fps, and secondly because you have more pixels to be displayed. That is exactly what rtings website shows at that input delay chart. Your test is not correct.
Consider that this test is done on PS5 and the input lag is from the controller, not the picture! On PS5 lower revolution typically = first upscale to 4K then downscale to 1080p (ex) That's why it's= more power usage= higher input delay (in controller, not picture)
I like your idea about the settings for fps increase. Maybe we can get a “best consistent fps graphic/interface settings” type of video, regardless I’m staying tuned to find out. Your videos are really well made 🎉
The input lag difference in the resolution test is because you didnt test on a 1440p or 1080p native display, you just changed that on your 4K display. The maximum speed of a display is achiev on it native resolution.
The rest wasn't done on a monitor or TV, but on a capture card by considering the native input delay and the results aren't based on the connected display
It would be great if you could figure out how to make the edge feel the same as dualsense. I've played with dualsense on 7/7 .85 ADS Dynamic for years and now I. Play with the edge and my aim just feels off, like jumpy and inconsistent. Ugh
Sure man we want more video like this specially, in the footstep and audio sections cause everybody is talking about the setting on the headphones or the dac…… but is never been clear on the PS five side, if we should set the audio to PCM to Dolby, audio or turn on the 3-D Sony effect and all this is messing up with (in casa you use it) dac amp and even more with the Dolby 5.1 or 7.1 virtual of your headset, causing at the end a huge m mess
I play on Xbox SX with ps5 controllers. Without question…the analogs on dualsense just feel better than the dual sense edge. I thought I was crazy at first, but hearing from you that there are others out there that feel the same, validates my findings
Btw, peeps. Don't buy a DS Edge until we know, for sure, that Sony has addressed a weakness with the back buttons/paddles. The molded sockets inside the controller, that the paddles and half-domes fit into, have tiny little hinge pins on them that will break in time. I got my Edge on day one, and the first pin broke on the left one within a week while using the paddles. Switching to the half-domes somehow allowed me to keep using it, though. And then, a pin on the right one broke in October (MWIII beta) and made that one totally unreliable. Someone here on RUclips did a workaround by shoving little pieces of plastic between the sockets and the metal brackets that hold them in place. Since I went ahead and let the warranty expire, I'm going to see if I can drill holes in the sockets for metal hinge pins, someday... Just a heads up for you guys until Sony comes up with a revision that fixes this.
Btw if you make a video talking in depth about the input lag difference between using fidelity cas with different types of resolution, I'll be the first to watch it
Last but not least and I’m asking this question because I see that you like to dig in new territories why in 10 years no one and repeat no one as ever talk about the bufferbloat that I really think is the value, the most interfere in your game and now to solve it thank you my man and keep up the good work
Hey Danial, I have an LG GP950 monitor, its a 4k monitor. I run it at 1440p because I thought it would have more stable 120 fps than running it at 4k (I don’t know if this is true, maybe you can test it), but should I change it back to 4k for lower input lag? I play wired, so I don’t know if it matters.
If i overclocked the controller for bluetooth it doesn’t matter anymore for imput lag im using the monitor on 1080p for better imput lag hdr turned off
i was hoping this video would bring light to how i can tune the Standard, Linear or Dynamic Slope ingame so that i can match it with the default response curve of dualsense edge but i guess i was expected to much 😂 Still a great video nonetheless
Thank you! testing the curve section is a huge work, over 10 hours for each controller with a slope scale of 1, but if I want to test even 5 steps (0-25-50-75-100) I have to take much more time and maybe weeks for both controllers, but I will cover that in future videos, I'd start with 0 Vs. 100 and will test the rest slowly.
I am so conflicted, CAS off the game doesn’t look as crisp. But I feel like I move is much better with it off. Am I tripping? I often have it set to 70. But it’s always in the back of my mind if it actually effect it that much.
this option isn't that effective for FPS when it's off, 50 was the most stable one in a few tests I did but I have to make more tests, FOV has the most affection.
so it still depends on which native resolution your monitor supports... It is difficult to say that in all scenarios the input lag is disadvantaged as soon as you lower your resolution. maybe you played on a 4k native monitor? what I mean to say by this; it might be interesting to see how it would affect input lag and frames per second once you play at native 1080p, native 1440p and native 4k
I think there has been a misunderstanding, the Input lag I showed here was from the Native Resolution test from the controller, and later I showed the monitor and TVs. so the controller input lag stays the same regardless of the monitor or TV, but the picture input lag changes based on the TV. so if the controller has a 30ms input lag and the TV has 10ms, you'll get a 20ms delay from when the picture is shown to the moment the action is done, and each frame = 8.33ms in 120Hz mode. so 20ms can be about 2 frames delay.
I was waiting for this video thank you so much!! Looks like I'm going to buy a new monitor. Mine is 14 years old and I wondered why I often lose when I chall an opponent. Every Ms counts in this game. Thank you again 🎉
between 60FPS and 120FPS mode there's a huge difference in controller and picture smoothness of the game, if you can, getting a monitor that supports 120Hz would be great for PS5 and FPS games.
Yes, I really think we have to support this guy to press like to the video and to subscribe because the approach game the mechanics is completely new and the he does a really deep but easily explained solution to all this problem. I’ve been watching those kind of videos for long time now what is the first time the summer strikes me with so many so I really think this guy needs a chance and we should support him a little bit more and see if he improves.
Love ur content ❤ i wanna see more curves videos :P thank you :D i would rly like to know if its posivle to make linear curve in WZ by manipulate with slope scale and pairing it with edge curves that should be fun
Very informative as always i hope one day u do a video on fortnite and how much is a difference between pc and ps5 in term of input delay and how aim assist is different on both and thanks for your work you are the best🔥🔥
So for LESS input lag on the EDGE is it better plugged in the FRONT or the BACK of the PS5 ? And what setting with bluetooth ON or OFF? And how much input lag is the difference? To see if is worth it one way over the other . Thank you for your hard work
about the ports, they all give you the same result (all are capable of 1000Hz with Edge after the latest test I made) I'd prefer Cable, not BT for Edge. the difference might be up to 2 frames.
Hey I tried your tip to use usb for dual sense and it didn’t feel right. I can’t tell if it’s placebo or not but it just felt slower for some reason and I went back to Bluetooth
Btw I got a question for you, in another video you say that voice chat adds +1.5ms delay to the PS controller but what if I use my headset through USB cable instead of using the 3.5m of the controller, will still cause the extra delay?
I’m interested in knowing how you’re getting your fps on ps5, I know it can’t be your monitor setting due to when you connect it to a monitor and turn on fps counter it sticks at “120” so I am really curious to know how you’re doing that.
So im confused ...im using regular dual sense controller with Bluetooth with samsung odessy g7 monitor ...should i use 1440p or 2160?i have vrr and alm and using hdmi 2.1 with lan cable
What monitor did you used to measure input lag from controller at (120hz) 1080p, 1440p and 4K at 1:44 ? Deviating from your monitor's native resolution will add lag. I don’t get how higher resolution results in less input lag. You must have measured them with a 4k monitor to get these results. It would be great to see more diving about this
Hi, I should mention in future videos that I don't use a monitor to measure the input lag, instead, I use a capture card that natively supports all resolutions, and the input delay is measured on the capture card + the RAW input delay is considered and taken away from final results, for example, it has 31ms delay in 4K 120FPS and I take that away from final result which was 40ms (eg) and we have 9ms as the actual input lag.
La verdad, es que me interesan todos los vídeos que has propuesto, me parecen muy interesantes, muchísimas gracias por tu ayuda, me encantó tu contenido, saludos!
I personally use Dynamic now as the start part isn't as slow as others, even linear is a bit slow at the start, but I'd test the slope scale to see when it's on 0 which one is the fastest.
Hi Daniel, you know, however, that in certain games I prefer to play more without HDR, so that the graphics are more refined and darker. I like them more that way. Maybe with an OLED the HDR is better and less foggy
Hello ,great video! For you , for better fps , does : "texture demande / fidelity fx cas / hdr / fov " affect the fps ?? All on off or on for better fps in games on ps5 ? (Like warzone etc . ) thanks a lot for your content ,amazing work !
Hi thanks, I haven't tested them in-depth yet so I can't provide false information, I only tested FidelityFX and 50 seems more optimized than the rest (0 was worse in my 5 tests.)
You might be the smartest, I appreciate this info, Danial, for slope scale dynamic is .90 or .80 better? Why do you prefer it is there more advantage or not really I’m confused to what lowering it does and I’d like to know your knowledge on this
That's kind of you, there are a lot I don't know and mistakes I make in videos, about the Dynamic I chose it because the start of linear and Standard is way too slow and ease in causes low response overall, making sensitivity higher makes it hard to control in long ranges, but I'ma test slop scale curve for the next video to see which becomes a linear one, I currently play with 0.90.
The PS5 settings in that section reflects some games settings, but in some other it's what you choose in the game, so as long as the game is set to 120FPS mode (for example) those settings in COD won't affect.
Recently, I got a Samsung Odyssey Neo G7 monitor LS32BG750NPXXU, and I have been looking at the settings whether to play in 1440p or 4K. I noticed that to play in 1440p, I have to have an option called VRR control on. However, I have seen somewhere that said having this option on causes input lag, something like 15.3 ms, I think it said. Does that mean I would be better off playing in 4K instead of 1440p?
The reason polling rate is so low on USB is that PlayStation has always had their USB ports locked at that refresh rate. I believe it was the same on PS3 & PS4.
@@DanielZH really? Interesting, I guess I misunderstood you. Does the tool you are using display whether it is the USB port being polled? That makes me thing DS Edge is just always connecting via Bluetooth (or via “PlayStation Link.”)
@@AG-ur1lj yes it does and I turned off BT when testing USB, there was no way it would use BT, but yes Edge has 1000Hz polling rate on USB and BT, USB is more stable though
@@DanielZH btw your content is amazing, you are the only channel making stuff like this. I’ve probably spent nearly as much time experimenting with audio as you, and at the moment I’m rocking “Soundbar” audio mix, with 3D audio _on_ , Bass and High cranked up, Low way down, Mid down 1 or 2 and Treble left at 0. I find footsteps to be very audible, and with 3D off I hear them well enough for it to be confusing and difficult to determine where they are coming from (hence 3D on)
So according to your results the ideal configuration would be the following: 2160p resolution, VRR activated. Is this configuration the one that would give you the least input lag? The doubt is with the VRR
Hi excellent videos congratulations, I wanted to know if I have a 60hz to have the minimum delay on the dualsense edge, which resolution is the best 1080p or 4k? unfortunately I don't have the 120hz but I will buy it in the future
Hi, based on the tests the higher resolutions have lower input lag, but I haven't tested 60Hz in 1080p, however I'd guess it's the same for 60Hz, try 4K and that's probably faster.
@@DanielZH agreed I noticed this back in mw2 after coming from mw 19 I noticed linear has little slowdown and in mw19 it dint had this effect I just like leaner since mw19
One issue.... the consoles cant do 4k 120 FPS.... Well technically speaking they cant do 4k 60 FPS either, or 1440p 60 or 120 FPS, all of them are upscaled from much lower resolutions, and why would latency decrease when your putting more strain on the system... how are you measuring the delay? with a stop watch... what what is the delay on your TV
Hi, You can check the last video for the method of testing: ruclips.net/video/smRW5VfpPbE/видео.html But in short: The method is currently done by connecting the PS5 to a capture card with an input lag of 31ms in the capture (tested with Input delay testing hardware and taking the monitor delay off the results to match the RAW input), then using a custom USB tool to connect the Controller to the PS5 and monitor the button presses simultaneously on the PC (with a delay of 1-3ms), recording on OBS (while there's no drop frames in either of hardwares) and checking how many frames it takes from the moment the button is pressed to the moment the game reacts to that action, doing many calculations regarding Idle input delay, real-time Polling rate tests, monitoring FPS with the VRR data for a reliable test and sometimes using trdrop with RAW ProRes recorded Videos (handereds of GB data for a single video) and the final input lag is based on the capture card delay, so there's no affection of the connected screen to the input lag readings, these are not RAW data from the hardware on console though but the difference between modes are reliable, I used to explain and show how it's done in every single video, but since no one would like to see that much of nerdy info pepople wouldn't watch my videos and there were low viewes, so I removed the testing parts for good reasons and I share the resutls instead. Everything I shared here is the basic part of it, there are a lot more in the process of testing and that's the reason why it takes weeks to do a few tests.
Have a Question....is it better to play CoD MW3 on PS5 with static 120FPS (without VRR) or with VRR an dynamic FPS. In second case i have drops between 110-120.....so, whats u say ?
Hi, you have drops when VRR is off too, it just doesn't sync anymore, we've done a new test for FPS you can check here: ruclips.net/video/Xnl0v1TAMLA/видео.html
For me the dualsense edge analogs also feels slower. Is it possible that the edge have different analogs. I mean they plugged with usb maybe thst causes analog delay. Hoe are the normal dualsense analogs connected to the controller?
Yes, VRR doesn't add Controller input delay in MW3, I tested that over 6 times and it was almost the same. but it may add a slight delay to the picture which I haven't tested that. nice Idea I'll work on that one.
On the C2 when it came out, people suggested to change input to PC and not console. Can you test input delay or picture quality between those 2 inputs.
@@DanielZH The reason why I'm asking. People said that a firmware changed things and no longer needed to be in PC mode when connected to a PS5. Before I was on PC input now on console but I can't really tell the difference
I have a Samsung Odyssey G7 and playing on 1440p 120 HZ is the greatest thing they ever did for console. I play on the ps5 and I can for the most part keep up against pc players. All you really need is a 1440p monitor with a high refresh rate and a custom controller 👍🏼
Hey can you do a video on azeron n mouse on the ps5? I feel like there is alot of delay n my friends are constantly telling me console isn't meant for mouse so I should just switch to controller. I can't find any vids on latency or anything on the ps5 for azeron n mouse. Thanks
@@DanielZH azeron isn't a game. Its a gaming device. Azeron replaces the keyboard for gaming. It has a joy stick n like 20 keys n it works with your mouse
can i use a usb-c to usb-c for this to work the same way in my ps5? I cant use usb-c to usb-a since my ps5 headset is connected through the usb-a port. Thank you, ur amazing!
Best Audio Settings for PS5 in 2024: ruclips.net/video/TDOXnkn1-yE/видео.html
Check my new channel: www.youtube.com/@DanialZHProMax
Do you like to support me?
ruclips.net/channel/UCzoK...
Discord Server:
discord.com/invite/ykkWZGrV29
Telegram Channel: t.me/Danielzh1
absolutely great video thank you for these tests i was using 1080p because i thought it would use less power and have less lag but now i switched to 4k after watching thank you!!! 🔥
@@Real_EpicGlad to hear that, thanks for watching!
test everything! we want to know everything! 💀 gg
i shared your channel with xclusiveace i think he would be very interested in your content :)
@@Real_EpicThank you! Sure
Also wanted you thank you for making these videos. There is no one else doing these types of tests even though so many people could benefit from it. Looking forward to your next video ❤
Glad you like them!
Give him more likes people.
Thanks!
Thanks back.
Very helpful videos.
Please keep them coming.
Yes this guy is the best Playstation youtube I come to 😊
Man, I completely agree with you it’s got a different approach Deep but simple
@@DanielZHquestion if i have a oled monitor that supports HDR peak 1000 do i still need to turn on HDR on console ?
Yes I would like a video on dual sense edge and which response curve works best with it. Your videos are very informative
Coming soon! Thanks.
@@DanielZH when bro? Im waiting for the video
pls make the same for Fortnite I think it is one of the only games that you can play competitively with PC games and have good results, in addition to being the most popular game. It will definitely be a very watched video or perhaps a video to know how to get the most out of our console to obtain less fps drops along with a good input lag either of these two videos would be great, keep up your good work
Great idea , a general settings will help a lot, maybe for ex desactivate this options and it will help with performance like HDCP for example or turn off bluetooth and other things that he will discover. Hope to see this . I playe competitive fortnite also and ps5 sometimes is imposible to play in lobbys that are too stacked
Thanks for the idea, as most of this channel's audiences are general I try to focus on general topics and COD has given good results so far, however, I may try a full video for Fortnite in the future and see if it works. because it requires a lot of time.
Great video again, I would really appreciate a video on the relationship between graphic settings and stable frame rate on PS5
Noted! Thanks
Something is wrong.. higher resolution shouldn't give you less input lag, firstly because you'll probably have less fps, and secondly because you have more pixels to be displayed. That is exactly what rtings website shows at that input delay chart. Your test is not correct.
Consider that this test is done on PS5 and the input lag is from the controller, not the picture!
On PS5 lower revolution typically = first upscale to 4K then downscale to 1080p (ex) That's why it's= more power usage= higher input delay (in controller, not picture)
@@DanielZH ok so what ur saying is the input lag is created by the ps5 because of the way it works that is not how it should.. ok I get it now
I like your idea about the settings for fps increase. Maybe we can get a “best consistent fps graphic/interface settings” type of video, regardless I’m staying tuned to find out. Your videos are really well made 🎉
Your testing work is very impressive. Interesting that you were able to collect data like this.
Thank you very much!
would you be willing to make a video on the keyboard and mouse input on ps5? good video by the way!
Thanks! I may cover that in future to see if it has a lower input lag, my keyboard is much faster than DS or Edge so it could be a nice idea!
The input lag difference in the resolution test is because you didnt test on a 1440p or 1080p native display, you just changed that on your 4K display. The maximum speed of a display is achiev on it native resolution.
The rest wasn't done on a monitor or TV, but on a capture card by considering the native input delay and the results aren't based on the connected display
It would be great if you could figure out how to make the edge feel the same as dualsense. I've played with dualsense on 7/7 .85 ADS Dynamic for years and now I. Play with the edge and my aim just feels off, like jumpy and inconsistent. Ugh
Yeah I'm going to work on that as a whole video how to make Edge Feel like DualSense coming soon!
@@DanielZH thank you
I would like to see more about the Overclocking controller on ps5
Graphics settings video would be amazing for call of duty to get maximum frames in 120hz mode please
Sure!
very well made video, full of information. I was not expecting this much when i clicked the video. Keep it up bro
Thanks a bunch, I'm glad you liked it.
Can you cover the fps part, I’ve tried a lot of think to keep a constant 120 fps. I’ve turned my prox chat off changed my fidelity cas
The cas setting is like the sharpness on the game, keep it on 50 for a good setting
yes 50 was a good choice so far in many cases, but I'd do a full test for all in the future.
Sure man we want more video like this specially, in the footstep and audio sections cause everybody is talking about the setting on the headphones or the dac…… but is never been clear on the PS five side, if we should set the audio to PCM to Dolby, audio or turn on the 3-D Sony effect and all this is messing up with (in casa you use it) dac amp and even more with the Dolby 5.1 or 7.1 virtual of your headset, causing at the end a huge m mess
I recently started using Linear at 0 and it is even MORE instantaneous.Linear at 100 felt sluggish similar to Dynamic
I'll test it soon!
I play on Xbox SX with ps5 controllers. Without question…the analogs on dualsense just feel better than the dual sense edge. I thought I was crazy at first, but hearing from you that there are others out there that feel the same, validates my findings
Yes on the USB/BT polling rates please. Very helpful info. Many thanks!
Thanks!
Btw, peeps. Don't buy a DS Edge until we know, for sure, that Sony has addressed a weakness with the back buttons/paddles. The molded sockets inside the controller, that the paddles and half-domes fit into, have tiny little hinge pins on them that will break in time. I got my Edge on day one, and the first pin broke on the left one within a week while using the paddles. Switching to the half-domes somehow allowed me to keep using it, though. And then, a pin on the right one broke in October (MWIII beta) and made that one totally unreliable. Someone here on RUclips did a workaround by shoving little pieces of plastic between the sockets and the metal brackets that hold them in place. Since I went ahead and let the warranty expire, I'm going to see if I can drill holes in the sockets for metal hinge pins, someday... Just a heads up for you guys until Sony comes up with a revision that fixes this.
Hey great video with lots of information, I like how you break down to explain everything. Thank you for putting all the time in !
Thanks for watching!
I appreciate your videos, I don't comment much but I always make sure to leave a like. Keep working and you'll hit 50k subs soon.
I appreciate it!
Dude you're the real MVP you test every single detail and put it simple and easy to understand
Keep it up!
I appreciate that! Thanks for watching.
Btw if you make a video talking in depth about the input lag difference between using fidelity cas with different types of resolution, I'll be the first to watch it
Would love to see a video on stability and FPS . Great video again 👏🏽
Noted! Thank you
Thank you for all the testing.
My pleasure!
Great job guy. And thank you for gave me the link in your last video.😉
🙏
Thanks for your work. You are the best! :)
Wow, thanks!
Amazing work, very very informative
So nice of you
Last but not least and I’m asking this question because I see that you like to dig in new territories why in 10 years no one and repeat no one as ever talk about the bufferbloat that I really think is the value, the most interfere in your game and now to solve it thank you my man and keep up the good work
Thanks a bunch! I'm happy you like the content
Please videos for overclocking ps5
I love all of your videos you been putting out keep up the great work 😊😊
Thank you Christopher!
Hey Danial, I have an LG GP950 monitor, its a 4k monitor. I run it at 1440p because I thought it would have more stable 120 fps than running it at 4k (I don’t know if this is true, maybe you can test it), but should I change it back to 4k for lower input lag? I play wired, so I don’t know if it matters.
Hi, this monitor has no issues with 4K 120Hz, that would be probably the best option.
If i overclocked the controller for bluetooth it doesn’t matter anymore for imput lag im using the monitor on 1080p for better imput lag hdr turned off
@@FeRyT0x1Cwhat about VVR on or off?
@@sonyking1229 always on
@@FeRyT0x1C thanks 😊
great work, yes would like the edge vid!
Coming soon!
i was hoping this video would bring light to how i can tune the Standard, Linear or Dynamic Slope ingame so that i can match it with the default response curve of dualsense edge but i guess i was expected to much 😂 Still a great video nonetheless
Thank you! testing the curve section is a huge work, over 10 hours for each controller with a slope scale of 1, but if I want to test even 5 steps (0-25-50-75-100) I have to take much more time and maybe weeks for both controllers, but I will cover that in future videos, I'd start with 0 Vs. 100 and will test the rest slowly.
@@DanielZH just take your time, no problem. At least i know its always worth the wait with the amount of work you put in
I am so conflicted, CAS off the game doesn’t look as crisp. But I feel like I move is much better with it off. Am I tripping? I often have it set to 70. But it’s always in the back of my mind if it actually effect it that much.
this option isn't that effective for FPS when it's off, 50 was the most stable one in a few tests I did but I have to make more tests, FOV has the most affection.
so it still depends on which native resolution your monitor supports... It is difficult to say that in all scenarios the input lag is disadvantaged as soon as you lower your resolution. maybe you played on a 4k native monitor? what I mean to say by this; it might be interesting to see how it would affect input lag and frames per second once you play at native 1080p, native 1440p and native 4k
I think there has been a misunderstanding, the Input lag I showed here was from the Native Resolution test from the controller, and later I showed the monitor and TVs. so the controller input lag stays the same regardless of the monitor or TV, but the picture input lag changes based on the TV.
so if the controller has a 30ms input lag and the TV has 10ms, you'll get a 20ms delay from when the picture is shown to the moment the action is done, and each frame = 8.33ms in 120Hz mode. so 20ms can be about 2 frames delay.
I was waiting for this video thank you so much!! Looks like I'm going to buy a new monitor. Mine is 14 years old and I wondered why I often lose when I chall an opponent. Every Ms counts in this game. Thank you again 🎉
between 60FPS and 120FPS mode there's a huge difference in controller and picture smoothness of the game, if you can, getting a monitor that supports 120Hz would be great for PS5 and FPS games.
@@DanielZH Thank you mate! I ordered a monitor earlier on. 120 fps with 1ms. My current monitor sits at 5ms and 60 fps. Thanks to your information 😁
Yes, I really think we have to support this guy to press like to the video and to subscribe because the approach game the mechanics is completely new and the he does a really deep but easily explained solution to all this problem. I’ve been watching those kind of videos for long time now what is the first time the summer strikes me with so many so I really think this guy needs a chance and we should support him a little bit more and see if he improves.
Thank you!
Love ur content ❤ i wanna see more curves videos :P thank you :D i would rly like to know if its posivle to make linear curve in WZ by manipulate with slope scale and pairing it with edge curves that should be fun
Thanks! will test them for the next one!
Cheer this MAN!
Thanks Brother!
Any time!
مثل همیشه عالی. پرقدرت ادامه بده👌
ممنون از لطفت 🙏
Very informative as always i hope one day u do a video on fortnite and how much is a difference between pc and ps5 in term of input delay and how aim assist is different on both and thanks for your work you are the best🔥🔥
Thanks a lot!
Great Video !
Thanks a bunch!
So for LESS input lag on the EDGE is it better plugged in the FRONT or the BACK of the PS5 ? And what setting with bluetooth ON or OFF? And how much input lag is the difference? To see if is worth it one way over the other . Thank you for your hard work
about the ports, they all give you the same result (all are capable of 1000Hz with Edge after the latest test I made)
I'd prefer Cable, not BT for Edge.
the difference might be up to 2 frames.
Hey I tried your tip to use usb for dual sense and it didn’t feel right. I can’t tell if it’s placebo or not but it just felt slower for some reason and I went back to Bluetooth
USB is slower as mentioned, BT is about 2-3ms faster on average.
@@DanielZH yea I get that but am I able to tell a 2-3ms difference? Idk I guess I do.
@@GHCMargarita no, typically a human can't tell that unless you're a superhero with special abilities.
Btw I got a question for you, in another video you say that voice chat adds +1.5ms delay to the PS controller but what if I use my headset through USB cable instead of using the 3.5m of the controller, will still cause the extra delay?
it only adds delay if it's connected to the controller. otherwise, it's almost the same.
Thank you my dude
I’m interested in knowing how you’re getting your fps on ps5, I know it can’t be your monitor setting due to when you connect it to a monitor and turn on fps counter it sticks at “120” so I am really curious to know how you’re doing that.
Watching in .5 speed. Great video
Cool, thanks
Mfn amazing work! 💪
Thank you 🙌
yes please overclock for ps5 and give us results. This could be game changing or not but could help for ranked if results are positive.
So im confused ...im using regular dual sense controller with Bluetooth with samsung odessy g7 monitor ...should i use 1440p or 2160?i have vrr and alm and using hdmi 2.1 with lan cable
What monitor did you used to measure input lag from controller at (120hz) 1080p, 1440p and 4K at 1:44 ? Deviating from your monitor's native resolution will add lag. I don’t get how higher resolution results in less input lag. You must have measured them with a 4k monitor to get these results. It would be great to see more diving about this
Hi, I should mention in future videos that I don't use a monitor to measure the input lag, instead, I use a capture card that natively supports all resolutions, and the input delay is measured on the capture card + the RAW input delay is considered and taken away from final results, for example, it has 31ms delay in 4K 120FPS and I take that away from final result which was 40ms (eg) and we have 9ms as the actual input lag.
La verdad, es que me interesan todos los vídeos que has propuesto, me parecen muy interesantes, muchísimas gracias por tu ayuda, me encantó tu contenido, saludos!
Thanks!
Yo the finals dropped a new update where they made input lag on PS5 better. Would be cool to see a updated video on that!
Did they add 120FPS mode?
@@DanielZH no they just improved input lag and added gyro aiming
Everyone who knows about your channel is a professional at games.
Or interested in tech!
Hey guys. What the FPS values when you change the FOV in game? Do we loose frames when we go all the way to 120fov?
I use 104
on PS5 the FPS drops regardless when you engage in a fight and is stable up to 100 when just walking around but I'm gonna test it further later.
@@DanielZH I love your channel. You are the only one answering all these questions and doing these tests. I appreciate you allot. Thank you
Hello Danial. So which are the best dualsense edge curve settings that best match with the in game curve settings? 6:53 thank you!!
Hi, I'm about to test DS Vs. Edge curve in a real linear situation and find out how to match Edge with older DualSense, then we can look into that.
Thank you again! Great work from your side! 🤝
Hey danial. Great job on the video very informative. Which aim curves you think are the best at the moment for the mw3 on dualsense edge controller?
I personally use Dynamic now as the start part isn't as slow as others, even linear is a bit slow at the start, but I'd test the slope scale to see when it's on 0 which one is the fastest.
@@DanielZHDaniel, awesome video as always. With the current dynamic .80-.90. What dual sense edge left and right would you recommend at this time?
@@DanielZHthank you so much. Keep up the good work!!!
Hey great video! I’m interested in seeing if color filter 2 in the “interface” tab has any effect on input lag on ps5?
I don't think so, but I'll test it in future videos
Yes please look into polling rate further.
sure
Hi Daniel, you know, however, that in certain games I prefer to play more without HDR, so that the graphics are more refined and darker. I like them more that way. Maybe with an OLED the HDR is better and less foggy
Yes, I also prefer SDR in non-OLED TVs unless there's a great local dimming and a great support from the game.
I ask you a favor, can you send me a video where you frame the sun in Spiderman 2? in HDR?
@@andrearossi1960 Do you have Discord? Send a message in server and I'll look for that
daniel can I send you a photo somewhere?
@@andrearossi1960 yes in discord: discord.gg/t9MGEQuH
or twitter: twitter.com/Daniel_zh1
Danial there’s a trend saying that on MW3 the sound bar preset is best for audio is there a way you can test it ? 😅
I tested in this video and it's kinda a very good mix. ruclips.net/video/TDOXnkn1-yE/видео.html
Where did you get the clear thumb sticks? My thumbs slip off the stock ones thank you 🤙🏼
Hi, here you can check: ruclips.net/video/r4WNe13SyuU/видео.html
Hello ,great video! For you , for better fps , does : "texture demande / fidelity fx cas / hdr / fov " affect the fps ?? All on off or on for better fps in games on ps5 ? (Like warzone etc . ) thanks a lot for your content ,amazing work !
Hi thanks, I haven't tested them in-depth yet so I can't provide false information, I only tested FidelityFX and 50 seems more optimized than the rest (0 was worse in my 5 tests.)
@@DanielZH 🙏👍thanks !
Aye Danial 🐐 can you tell me how to lower input lag on ps5/edge controller on 60fps game specifically?
COD on 60FPS? I only tested the 4K 60FPS, not sure if other resolutions have lower input lag in 60FPS, but I can consider that for newer videos.
@@DanielZH lmk pls
Incredible information
Glad you think so!
You might be the smartest, I appreciate this info, Danial, for slope scale dynamic is .90 or .80 better? Why do you prefer it is there more advantage or not really I’m confused to what lowering it does and I’d like to know your knowledge on this
That's kind of you, there are a lot I don't know and mistakes I make in videos, about the Dynamic I chose it because the start of linear and Standard is way too slow and ease in causes low response overall, making sensitivity higher makes it hard to control in long ranges, but I'ma test slop scale curve for the next video to see which becomes a linear one, I currently play with 0.90.
@@DanielZH Danial does lowering it make it slower or faster
how bout difference between performance mode , game default, and resolution mode. make a video plz
The PS5 settings in that section reflects some games settings, but in some other it's what you choose in the game, so as long as the game is set to 120FPS mode (for example) those settings in COD won't affect.
Recently, I got a Samsung Odyssey Neo G7 monitor LS32BG750NPXXU, and I have been looking at the settings whether to play in 1440p or 4K. I noticed that to play in 1440p, I have to have an option called VRR control on. However, I have seen somewhere that said having this option on causes input lag, something like 15.3 ms, I think it said. Does that mean I would be better off playing in 4K instead of 1440p?
Your videos are amazing and very helpful on the information you give out please people give these videos a thumbs up
I appreciate that!
The reason polling rate is so low on USB is that PlayStation has always had their USB ports locked at that refresh rate. I believe it was the same on PS3 & PS4.
However, DS Edge has 1000Hz on USB. it comes to the controller itself.
@@DanielZH really? Interesting, I guess I misunderstood you. Does the tool you are using display whether it is the USB port being polled? That makes me thing DS Edge is just always connecting via Bluetooth (or via “PlayStation Link.”)
@@AG-ur1lj yes it does and I turned off BT when testing USB, there was no way it would use BT, but yes Edge has 1000Hz polling rate on USB and BT, USB is more stable though
@@DanielZH btw your content is amazing, you are the only channel making stuff like this. I’ve probably spent nearly as much time experimenting with audio as you, and at the moment I’m rocking “Soundbar” audio mix, with 3D audio _on_ , Bass and High cranked up, Low way down, Mid down 1 or 2 and Treble left at 0. I find footsteps to be very audible, and with 3D off I hear them well enough for it to be confusing and difficult to determine where they are coming from (hence 3D on)
@@AG-ur1lj thanks for sharing, I'll give it a try!
So according to your results the ideal configuration would be the following: 2160p resolution, VRR activated. Is this configuration the one that would give you the least input lag? The doubt is with the VRR
Yes in 120Hz mode, in every test I ever made in 4K 120Hz VRR enabled gave me lower / same input lag in firing range and private matches.
hello what do you think about Scuff reflex pro for cod ?
Hi excellent videos congratulations, I wanted to know if I have a 60hz to have the minimum delay on the dualsense edge, which resolution is the best 1080p or 4k? unfortunately I don't have the 120hz but I will buy it in the future
Hi, based on the tests the higher resolutions have lower input lag, but I haven't tested 60Hz in 1080p, however I'd guess it's the same for 60Hz, try 4K and that's probably faster.
Please do a video on the curve slope
Yes I will!
cool but Linear is on top
Linear is not linear though! I'd test slope scale later.
@@DanielZH agreed I noticed this back in mw2 after coming from mw 19 I noticed linear has little slowdown and in mw19 it dint had this effect I just like leaner since mw19
So overall it means that running your LED/OLED TV or gaming monitor its NATIVE resolution is the best option...?
as long as you get the 120Hz option, yes.
So it’s better to use Bluetooth rather than keeping it plugged in on ps5 when using the dualsense edge?
Edge is better with USB, DualSense is better with Bluetooth typically
You're the real goat
Thank you!
I knew you would choose dynamic over linear eventually 😂
yeah linear isn't really linear if it was I would have like that, but it's slow at start way too slow, I'll be testing slope scale soon though.
One issue.... the consoles cant do 4k 120 FPS....
Well technically speaking they cant do 4k 60 FPS either, or 1440p 60 or 120 FPS, all of them are upscaled from much lower resolutions, and why would latency decrease when your putting more strain on the system...
how are you measuring the delay? with a stop watch... what what is the delay on your TV
Hi, You can check the last video for the method of testing: ruclips.net/video/smRW5VfpPbE/видео.html
But in short:
The method is currently done by connecting the PS5 to a capture card with an input lag of 31ms in the capture (tested with Input delay testing hardware and taking the monitor delay off the results to match the RAW input), then using a custom USB tool to connect the Controller to the PS5 and monitor the button presses simultaneously on the PC (with a delay of 1-3ms), recording on OBS (while there's no drop frames in either of hardwares) and checking how many frames it takes from the moment the button is pressed to the moment the game reacts to that action, doing many calculations regarding Idle input delay, real-time Polling rate tests, monitoring FPS with the VRR data for a reliable test and sometimes using trdrop with RAW ProRes recorded Videos (handereds of GB data for a single video) and the final input lag is based on the capture card delay, so there's no affection of the connected screen to the input lag readings, these are not RAW data from the hardware on console though but the difference between modes are reliable, I used to explain and show how it's done in every single video, but since no one would like to see that much of nerdy info pepople wouldn't watch my videos and there were low viewes, so I removed the testing parts for good reasons and I share the resutls instead.
Everything I shared here is the basic part of it, there are a lot more in the process of testing and that's the reason why it takes weeks to do a few tests.
Can you please test 1080P at 60fps too
Hi! I have a question, how does the Dynamic curve change with changing the slope scale?
That's what I'm gonna test for the next videos, I have to test all 3 and see what happnes.
Have a Question....is it better to play CoD MW3 on PS5 with static 120FPS (without VRR) or with VRR an dynamic FPS. In second case i have drops between 110-120.....so, whats u say ?
Hi, you have drops when VRR is off too, it just doesn't sync anymore, we've done a new test for FPS you can check here: ruclips.net/video/Xnl0v1TAMLA/видео.html
Gold. 🎉
For me the dualsense edge analogs also feels slower. Is it possible that the edge have different analogs. I mean they plugged with usb maybe thst causes analog delay. Hoe are the normal dualsense analogs connected to the controller?
I use the C2 also…do you recommend COD with VRR on at 120fps? Ive read vrr adds more input lag. Some people say it doesnt.
Yes, VRR doesn't add Controller input delay in MW3, I tested that over 6 times and it was almost the same. but it may add a slight delay to the picture which I haven't tested that. nice Idea I'll work on that one.
On the C2 when it came out, people suggested to change input to PC and not console.
Can you test input delay or picture quality between those 2 inputs.
@@thekids_callmeboss6577 PC mode is the best based on a few tests I made in early versions, but I haven't tested recently.
@@DanielZH The reason why I'm asking.
People said that a firmware changed things and no longer needed to be in PC mode when connected to a PS5.
Before I was on PC input now on console but I can't really tell the difference
I have a Samsung Odyssey G7 and playing on 1440p 120 HZ is the greatest thing they ever did for console. I play on the ps5 and I can for the most part keep up against pc players. All you really need is a 1440p monitor with a high refresh rate and a custom controller 👍🏼
Yes a 1440p monitor does the job done in most cases!
Hola amigo yo lo uso en predeterminado izquierdo y derecho precisó -2 te parece bien? Juego warzone
Hola, mientras te sienta bien, ¡está bien! ¡La configuración es personal y cada uno tiene un gusto diferente!
Is it or people getting more lags on warzone lately? My connection is over 100 but since warzone 3 dropped, game lags here and there
4:56 pls make a vid for better fps
Now do the Scuff envision
Not available here yet!
How many HZ should I use for console on my smart tv that runs 1080p? Currently I have it on 120Hz
120Hz is the best option if your screen supports it.
If my monitor is 4k but some of the older games like ghost of tsushima that i play are locked at 60hz. Should I play 4k or 1440p for input lag
as long as it's 60FPS then the 4K would do the job!
Hey can you do a video on azeron n mouse on the ps5? I feel like there is alot of delay n my friends are constantly telling me console isn't meant for mouse so I should just switch to controller. I can't find any vids on latency or anything on the ps5 for azeron n mouse. Thanks
Haven't heard of that game tbh
@@DanielZH azeron isn't a game. Its a gaming device. Azeron replaces the keyboard for gaming. It has a joy stick n like 20 keys n it works with your mouse
@@Megan24NicholeOh I see, I'll check it out to see if it's available.
@@DanielZH ty, really appreciate it
Does lowering the slope scale on dynamic make it faster or slower
I'm testing them for the next video, haven't fully tested yet
can i use a usb-c to usb-c for this to work the same way in my ps5? I cant use usb-c to usb-a since my ps5 headset is connected through the usb-a port. Thank you, ur amazing!
Hi, yes USB-C to C is fine and works without any issues.
Hey I play mlb24 on Samsung odyssey g7 monitor to play in 4k or 1440p or 1080p ?
AWESOME
Thank you! Cheers!