Cobra Class 26 Vs Cowboy 3200 Leather Sewing Machines
HTML-код
- Опубликовано: 21 апр 2022
- Cobra Class 26 Vs Cowboy 3200
chucksleatherworks.com/go/lea...
Cobra Class 26 Vs Cowboy 3200 if you need a good high-quality sewing machine to work with leather products, both the Cobra Class 26 and the Cowboy 3200 are excellent options. Whether you’re working on projects for personal use or you own a small business, the right machine is a must. Both the Cobra Class 26 and the Cowboy 3200 are made for all types of leather items, including wallets, belts, knife sheaths, and so much more. If you’re having a hard time deciding between the Cobra Class 26 vs. Cowboy 3200 sewing machines, keep reading because the information below will help you make the right decision.
Cobra Class 26 Leather Sewing Machine
First of all, the Cobra Class 26 leather sewing machine is a scaled-down version of the Cobra Class 4 machine, yet there are some definite noticeable differences. With this machine, you get a compound feed walking foot, a digital DC servo motor that is top of the line and reliable, a digital servo motor speed reducer, and a fine-tune thread tension pre-tension device to make sure tension problems don’t prevent you from creating your masterpieces on a daily basis. With the Cobra Class 26 sewing machine, you can work with all types of fabric and leather that is up to five-eighths inches thick.
The Cobra Class 26 machine is perfect for sewing handbags and purses, holsters, and other items, as well as all types of craft and home-decorating projects. You can use thread sizes 46 through 407, and it makes all of your leather projects much easier to work with. This machine is similar to other Cobra machines made for sewing leather but provides you with an easy way to work with leather, similar to what a cylinder arm machine can do. It is made for light- and medium-duty leather work and is easy to work with, even if you’ve never sewed with leather before.
With the Cobra Class 26 leather sewing machine, you get a 10-inch cylinder arm, a U-style bobbin that is large and loads at the top of the machine, and the ability to use needles from #16 to #24. The stitch length is 3 to 10 stitches per inch, and the machine comes with accessories such as a 10-pack of size 22 needles, four bobbins, spool of 138 Natural Thread, thread stand, LED super beam lamp, and owner’s manual.
Cowboy CB3200 Leather Sewing Machine
The Cowboy CB3200 is an industrial sewing machine specifically made to work on leather projects, as well as bioplastic materials, cloth, webbing, and many others. With the CB3200, you can sew up to half an inch of saddle leather and use nylon or polyester thread up to #346. The sewing surface height is 37 inches from the floor, and it has a table that is 22” x 48” in size. The table is also U-shaped and therefore allows you to sit at it when working on your projects, which is convenient. When you sit down at the machine, you can work on standard and thinner fabrics easily.
The CB3200 leather sewing machine even comes with a cylinder arm that is 10.5 inches in length, making it perfect for making saddle bags, belts, collars, and even holsters. It has a compound triple-feed walking foot that allows all layers of the fabric to move together, as well as stainless-steel presser feet, which Cowboy calls harness feet. The machine can accommodate needles (7x3 or 794) that are #18 to #27, and you get large-capacity ⅞” x 1” bobbins to accommodate your projects. The maximum speed of the machine is 800 RPM.
Best of all, you get everything you need to begin using the machine immediately, including bobbins and a pack of 10 needles that matches your preferred thread size. The machine accommodates a max stitch length of two per inch, and you also get a high-torque servo motor, ball bearing 3:1 speed reducer, and a front panel speed control knob. There are upgrades and accessories available should you choose these options, and the CB3200 also comes with a limited lifetime warranty.
chucksleatherworks.com/cobra-...
chucksleatherworks.com/
• Calfskin Vs Cowhide | ...
• How to Use Rivets With...
• How to Soften Veg Tan ...
• What Every Leather Cra...
• Sailrite Fabricator vs...
• Tan Kote vs Resolene |...
The thread sizes are wrong for the class 26 as well.
Two stitches per inch???
This video sucks. The machines shown aren’t the machines talked about.
Correct, neither show a walkin foot.
Excelente maestro pero a las tú o deja la pantalla limpia
Cowboy 6900 would be a comparable machine to the Class 26, eh?
The Class 26 does not accomdate 5/8" thickness leather. Only up to 7/16".
This is false, Class 26 less than 3/8" thick, and I'm sure the Cowboy does more than 2 stitches per inch.
Can’t possibly be two stitches per inch. That’s not sewing.
Abundant misinformation here.
AI produced crap video