Front Tweeters UPGRADE, Toyota Corolla - Upgrade to Rockford Fosgate Tweeters
HTML-код
- Опубликовано: 4 июн 2024
- Upgrading the front sailpanel tweeters on a 2014-2018 Toyota Corolla, with a pair of Rockford Fosgate Tweeters.
Amazon Affiliate Links
➡️ R1T-S Tweeters (Pair): amzn.to/3GFLyaT
➡️ Tweeter Harness Adapters (Pair): amzn.to/40EuN99
➡️ Dremel 4000 KIT: amzn.to/3JSsKbq
➡️ Soldering Iron+:Solder: amzn.to/3XpheI0
➡️ Heat Shrink: amzn.to/3RS6PmP
➡️ High Quality Electrical Tape: amzn.to/3XjatqO
➡️ C-Clamp: amzn.to/3JWHB4L
➡️ Painter's Tape: amzn.to/3lnPPsB
As an Amazon Associate I earn from qualifying purchases. If you place an order, thank you for supporting my channel!
00:00 Intro, Parts and Materials
00:18 Remove the Old Tweeter
00:36 Installing the new Flush Mount
01:54 Using a Dremel to Make the Sailpanel Opening
03:53 Sanding the Opening In the Sailpanel
05:45 Connecting the Wires to the new Tweeters
08:01 Installing the new Tweeters in the Sailpanel
08:20 Installing the Tweeters on the Car
⚠️ DISCLAIMER:
Use of the information in this video is solely at your own risk. The creator of this video assumes no liability for any property damage, injury or expenses incurred as a result of any of the information contained in this video. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result.
The creator of this video makes no claims, promises or guarantees about the accuracy, completeness, or applicability of the procedures and instructions contained in this video.
Any injury, damage, or loss that might occur as a result of improper application, improper use of tools or equipment, or from the information contained in this video, is solely the responsibility of the user. 
Хобби
If you liked this video, Please give it a thumbs up, *your support is appreciated* 👍 . Questions and comments are welcome below, I'll try to respond to everyone.
EXCELENTE VIDEO, INSTALE ESTOS TWEETERS EN MI COROLLA 2016 Y EL CAMBIO FUE DEL CIELO A LA TIERRA, GRACIAS, LUCEN COMO SI FUERAN DE FABRICA.
Thanks a lot for your infos ! I made the project i am very excited.
That's Great!
I was looking for a video on this like a week ago and you came out with this video. Clutch! Thanks for posting
Thanks for your detailed responses. One last question, do you have a video where you demonstrate the best way to do/best place to put the grounding wire for an amp on a 2014 toyota corolla
Thanks for sharing, made that looks so easy.
You’re welcome 😊
Excellent job 👏
Thank you 😀
Hi clever fix, I have base model Corolla didn’t came with tweeter can I buy them tweeter and plug and play
Excelente!!! Bravo!!! superrr
Canada man, they sound pretty sweet.
The voice and instruments really pop
Yes they sound great.. It took a few days to adjust, at first I thought there are too many highs, and I turned them down.. but eventually I turned the highs back to normal and it sounds great. I guess I was used to flat music without highs.
@@CleverFixHow do you adjust the highs?
Sir,which tweeter speaker best install with sony car tape
PERFECT
Como los puedo conectar si no tengo adaptador?
Will there still be a sound quality increase without an amplifier? I'm assuming these are low impedance speakers if you're using the stock radio
The answer is yes with high sensitivity speakers - like every Infiniti reference speaker they win be louder and cleaerer even on stock
If I dont have a solder gun handy any reason not to use butt connectors here as done with the 6" speakers?
You could use butt connectors yes. I prefer soldering when possible, that way if there's an issue I know for sure the soldered connection is not causing it. On the speakers I had no choice, because it's aluminum to copper, so it can't be soldered. Make sure to squeeze the connector really well.
is it required to dremel into the plastic? in other words can the new tweeters fit into the OEM housing ?
They fit, but the tweeters have their own grill. They are not designed to be placed behind another grill, and will sound quite bad. I would rather not do the upgrade than place them behind the grill, that's how bad they sounded to me.
Do you think there is a way to keep it looking OEM? (After the upgrade)
Paint the mount with flat or semi-gloss black paint before installing it if you don't like the white writing. There's no other way, installing the tweeter without it's mount will not sound good (double grill is bad for sound).
Do you know if they sell the mount part by itself?
They're sold together,.. Most brands will come with their own flush mount. Check the included items in the manual for the tweeters you're considering, and it should show what's inside as well as the cut-out template, with the width for the hole required so they fit in perfectly. Here's the R1T-S: rockfordfosgate.com/rftech/library/2012/4_speakers/rf_primer1speakers_cutout-irs.pdf it's 1.83" , top right of page 4.
My dog, enjoying the video so far, are you from Hungary? You sound identical to my buddy who lives there. I am doing this same thing for some skar tweets.
Nice! Skar tweeters are great.. I was going to get some, but it was harder to obtain them than the Rockford, and I figure the quality will be very similar.. The Skar may be louder.
never solder speaker wire. Solder adds a lot of attenuation and the heat does the same. The neat result is more attenuation is less sound.
Pre-twist and solder properly, and you'll get a good connection. Solder is used everywhere. Even the factory solders from the spade terminal the coil of the speaker, and in the car stereo the pins for the speaker wires are soldered to the circuit board.
pasteboard.co/MK5GQgVCE42Z.png
What about capacitors? OEM tweeters have them built in
Yes the Rockford Fosgates have them built in also, they're at the back, I show them in my Unboxing video ruclips.net/video/n87ONuvIHDc/видео.html
Thank you for this video. I got a question about Bluetooth that is not related to this video. I have issue with my Toyota Corolla Bluetooth. When I get a phone call over Bluetooth, it is very noisy. The other side of the call cannot hear me. Do you know how I can fix it? Thank you!
Did you try another phone? You have to first find the problem to fix it. If it's bad with every phone, then it's the car at fault. Try another phone first. The microphone is in the dome lights right above you.. so if there's something wrong with the microphone, it could be replaced. Lastly if there's something wrong the stereo, you can try another stereo from a junk yard. I will be posting a video on how to upgrade the stereo with a Pioneer within a month or so.
👍👏👏
Why wouldn’t you just mount the new speaker in from the back?
Double grill for tweeters makes them sound horrible. The grill it comes with is optimized for the tweeter to sound good. Any other grill or obstruction of the sound will reflect the sound and it sounds bad, I tried.
Tweeter is to big for mount
remove the letters then it would be perfect
Spray paint with a Matte/flat color is probably the best.. 3-4 light coats, and it can cover it nicely.