They honestly mightve had the same issue that's how the bolts looked on my eclipse exaust and I've soaked the shit out them, used air impact & tried a electric 300ftlbs tq imapct with and without heat, breaker bar with pipe cheater thats 2ftish just to barely break it lose and snap it 😂🤣 some of us don't have as good of luck working on our cars lmao
16:50 when calvin says “It can’t block the door, what if there’s a fire we’re gonna die”😂😂 as if there’s not 3 large garage doors wide open right next to them😂😂 I Loved the Video❤️❤️Keep up the great work
Great vibes but please, the quality of video difference between the first minute is like 100 times better than the rest of the video, colour or saturation is no bueno and some parts the focus was brutal
definitely suggest some Lav mics, or even a shotgun mic, at like 10 minutes all the sudden my ears are blown out by cars revving and I can't hear what anyone is saying
new rookie at the cam it seems like... shutterspeed appears to be wrong at some times making everything feel very stuttery. outside shots were way overexposed and he tried to make it look professional by overcooking the color grading...
@@stenmartens7179 yeah definitely agree with that, my other comment was all the color grading was matching the content at all. It's a vlog, shouldn't look cinematic.
Calvin's hair when he took his hat off looks like he was about to go super saiyan lol edit also teej bring back the tie dye merch that shit goes so hard.
For future reference; If your biggest badest impact can't undo a bolt, shorten the extension if you can. extensions are bigger torque losses than you think. Could have probably shortened that by a foot and still would have had room to undo it.
I noticed you didn't protect your paint job, which is cool because now you can paint it a "Forrest Green with Black Pearl", and it will look way better, plus Amelia could have torn that engine out in half the time.
when the impact gun can’t take out the bolt try spinning it with you with your other hand and that will add 5-10 pounds more torque and that usually dose it
So I get timing for the paint shop and all but pulling the engine before paint would be a good way to avoid any damage to the paint. Also could paint the engine bay and whole car at once and could fix all the rust.
If you are not re-using the exhaust it can be remove in under 10 minutes. Learn how to use a set of torches. If you get good you can even remove internal fitted pipes from external pipes while saving the external one. I used to do cat back systems on rotted exhausts in under 20 minutes.
I know this was just everything to pull a motor but I absolutely LOVE seein you actually work on ur cars bro. Not just sending em off for someone to work on. 💪🏽
Bet, if you ask Valvoline for protective front fender covers, they will send you a pair : )...Belt buckels on the painted front fenders, are not friends...Subbed, and always a thumbs up!
A trick to taking out rusty bolts that I’ve learned,bud using WD-40. Idk why it works or the science behind it, but whenever I’ve had a rusty bolt to deal with, I’ve always used that and it’s always worked for me. Who knows, might help out with this build too
It's oil and cleaners mixed that creeps deep into the threads and dissolves some of the rust and also lubricates everything. This is standard issue in any shop
@tjhunt for any rusted bolt on a vehicle, truck, car ect get some pb blaster for rust and to clean the nasty from underneath or in the engine bay some purple power will be good
You should switch out all your kick plate covers and make them light up and say hunt and Co or on your supra street hunter for any cars that have street hunter kits
Aye bro get a pipe or something slide it over the handle of a breaker bar bolts come out 10 times easier. Make sure you hold the head of the breaker car tho
Calvin = accessory boy! Between the noise cancelling ear protection, gloves, chains, cell phone hostlers, eye protection, rings, and black nails for such basic work around the shop?…. I can’t!
Visit helixsleep.com/tjhunt to get up to $200 off your Helix mattress, plus two free pillows!
Love the videos my man your hard work inspires me to set my life up for future generations
Love your videos keep moving forward
thank you Teejus
@Davis Carla en su mayoría en las que el equipo se
Yooooo do the engine cover gold for the lambo I remember you were having problems deciding on the color would be cool for sema
As a Valvoline employee, I think we should get these as a part of our uniform!
Hey i also work for a valvoline store
@@user-wm9pj2xj7z Hell yeah
Everyone working the valvoline booth at SEMA will be wearing the collab :)
@@tjhunt_ Dang wish I could be there, I got work
I also work at Valvoline
i wish you could see the rust we deal with in New England, the underside of that car is practically brand new to us😂
I didn’t think it looked all that myself, other than surface rust it was clean, not flaky or lifting.
yes because of the salt used on the roads
Facts, my 240 has holes bigger than a hand in the frame and floor
Facts he hasn’t seen rust like the north east
Hell yeah New York is painful
“Super rusty bolts” - laughing in Canadian
This gave me OG vibes of back when you guys used to do vids in Calvin’s garage 🔥
Think you just simping dude.
can't wait for VLOGMAS 🤌🏻🔥
me too!!!
I have some great surprises for vlogmas....
Me too brother 😮💨
i just love visualizing that kevin is just coming to the shop after a full day of work, the grind never stops
You didnt get scammed you just didnt look because the car looked good at first sight.
Yah but makes good title hehehe
You guys ever heard of WD-40 or a little bit of heat?? Geeze man, that is literally not rusty at all
They honestly mightve had the same issue that's how the bolts looked on my eclipse exaust and I've soaked the shit out them, used air impact & tried a electric 300ftlbs tq imapct with and without heat, breaker bar with pipe cheater thats 2ftish just to barely break it lose and snap it 😂🤣 some of us don't have as good of luck working on our cars lmao
6:20 I was cringing when I saw that one spider swinging above Tj... 😬
i thought i was the only one that noticed it
The Mustang in the background 🔥
Tj “I wanna keep it stock”
Also Tj
Pulls motor next video
😂😂
hes sr20 swapping. sr20s are stock for those cars in japan
think he’s gonna put the extra 2j motor he has in this
17:50 I low key feel Calvin pissed at TJ for complaining so much but trying to still keep is cool for the vlog lmao.
16:50 when calvin says “It can’t block the door, what if there’s a fire we’re gonna die”😂😂 as if there’s not 3 large garage doors wide open right next to them😂😂 I Loved the Video❤️❤️Keep up the great work
Great vibes but please, the quality of video difference between the first minute is like 100 times better than the rest of the video, colour or saturation is no bueno and some parts the focus was brutal
Tj freaking out over spiders is the funniest thing on the entire internet! 😂😂
your comment section is full of bots..
So true lool.
Getting ready for the sema vlogs with no voice teeg!
Good to see a JDM in its new home. Good content in line plus the car is going to look amazing. Keep moving forward Teej!
definitely suggest some Lav mics, or even a shotgun mic, at like 10 minutes all the sudden my ears are blown out by cars revving and I can't hear what anyone is saying
I second this
new rookie at the cam it seems like... shutterspeed appears to be wrong at some times making everything feel very stuttery. outside shots were way overexposed and he tried to make it look professional by overcooking the color grading...
@@stenmartens7179 yeah definitely agree with that, my other comment was all the color grading was matching the content at all. It's a vlog, shouldn't look cinematic.
@@stenmartens7179 yesss I said this when they first started using him. The dude needs an Nd it makes me feel a bit motion sick
Ready for these next few weeks for everything coming up! 🔥 also the bullet starting to heat up!!
Calvin's hair when he took his hat off looks like he was about to go super saiyan lol edit also teej bring back the tie dye merch that shit goes so hard.
For future reference; If your biggest badest impact can't undo a bolt, shorten the extension if you can. extensions are bigger torque losses than you think. Could have probably shortened that by a foot and still would have had room to undo it.
Protect the paint!
KEEP MOVING FORWARD😤
2:45 Calvin: "I'm over it!"
Me: Your hair is over it! 😂😂
This whole garage is over it!! 😂😂😂
Not them leaning and sitting (Calvin) on the new paint 😂
@11:11 the jdm mustang is back home baby 😍
can't wait to see more on it
I noticed you didn't protect your paint job, which is cool because now you can paint it a "Forrest Green with Black Pearl", and it will look way better, plus Amelia could have torn that engine out in half the time.
when the impact gun can’t take out the bolt try spinning it with you with your other hand and that will add 5-10 pounds more torque and that usually dose it
Come check out east-coast s-chassis’ lol. Makes this look mint.
Congrats on 2million broo been here for more years than i can remember
This is my favorite type of video raw footage working on cars 🤘🏼
So I get timing for the paint shop and all but pulling the engine before paint would be a good way to avoid any damage to the paint. Also could paint the engine bay and whole car at once and could fix all the rust.
TJ hasn’t seen rust lol
Come to see Chicago cars 😂
Felt that hella. We have a Chicago RSX, the bolts look like layered pancakes
If you are not re-using the exhaust it can be remove in under 10 minutes. Learn how to use a set of torches. If you get good you can even remove internal fitted pipes from external pipes while saving the external one. I used to do cat back systems on rotted exhausts in under 20 minutes.
i am still hyped about that Mustang in the back!!!! whoooo hoooo!
channel is LIT!!!
Teej I been here since your paintball videos way back when you deleted all your videos to start cars! You've come so far I'm so proud 👏 🥲
The never ending banter between TJ & Calv 😂❤️
I know this was just everything to pull a motor but I absolutely LOVE seein you actually work on ur cars bro. Not just sending em off for someone to work on. 💪🏽
If Valvoline sees this I get all my regular cars oil changes at your shops now cause of the TJ sponsor. It’s 3. Pretty happy with the service too.
When you hear the Throtl Evo first start in the TJ Hunt vid!!!!!
So the Mustangs back!!!
Let's goooooo Doctor Teeg
the Mustang is Home!🔥 Ready for that video!👌
Tj and Calvin are definitely a dynamic Duo 👏
PB Blaster is your friend on a 240 / Silvia. Mine was rusty as hell too. Lots of bolt replacement.
I still don’t understand why he painted the car first… the rubs up on it and pulls the engine
Timing worked out better to paint it first with other projects going on. Car will buffed/polished after new motor so I’m not too concerned
Content!
Tj no use brain. That's why
8:35 when you realize TJ is tightening it even more by hammering it xD
nice to see you 2 working on builds agains together. this is how every build should be, no matter how long it takes
Bet, if you ask Valvoline for protective front fender covers, they will send you a pair : )...Belt buckels on the painted front fenders, are not friends...Subbed, and always a thumbs up!
TJ's channel is like watching infomercials on RUclips
Never miss a notification from teeg
Facts
Lmao Teej & Calvin. Great to see them wrenching on a JDM again. Even Kevin helping out. 🙌
D1
Calvin is to much sometimes he tries to hard
He deserve it. Rock on Cal VinDiesel.
Nun but a good ol video with the boys n working on cars! Love it man
What about getting the smog?
Big credits to Kendall this editing is 🔥🔥
Wow, your Mustang looks nice, good easter egg, at 10:56.
At 10:55 are we just not gonna talk about the mustang in the background looking sick af 😂
Be careful with copyrights....Ford might get mad. Emphasize Bullet not Bullitt
Thanks for uploading on my birthday TJ
Its always a good day when you get home from work or school to see that TJ uploaded
9:00 Try without extension, or at least the shortest one possible, those actually absorb the impact
thank you!!!!
The mustang is looking sick af TJ!!!
Bro Calvin be over here looking fresh. Like 💯💯
The impact works best with the shortest extension as possible
Long extensions ruin the power of them!
A trick to taking out rusty bolts that I’ve learned,bud using WD-40. Idk why it works or the science behind it, but whenever I’ve had a rusty bolt to deal with, I’ve always used that and it’s always worked for me. Who knows, might help out with this build too
It's oil and cleaners mixed that creeps deep into the threads and dissolves some of the rust and also lubricates everything. This is standard issue in any shop
6:20 😂 tj almost turns it to Spiderman
HONESTLY TJ JUST CANT WAIT TO TALK TO YOU AND MEET YOU MY BIGGEST MOTIVATION AND IDLE YOUR THE REASON I STARTED MY RUclips SO THANK YOU!!
You can get rusted bolts stuck in the socket, loose by just throwing it on the ground. Works everytime
good on ya calv for wearing hearing protection. love to see it.
Come one Calvin!!! Rust changes the dimensions of the nut you’re referring to. That’s not a bolt.
Mmmmmm the mustang in the back of the video just chillin up there
Mustang wheels look sick in the back😍😍
Use pb blaster. It will help with the rust.
Really hoping it's an SR20!!
Question, if you lowered the lift slightly while trying to get the transmission to clear, would that have helped? 🤔
I knew someone would catch that.
I'm absolutely loving the s14 videos
Eyyyyyy, the Huracan and GT350 is bacc, babyyyyyy
Tj hunt vibes always dope content keep up the good work grinding and staying positive...
@tjhunt for any rusted bolt on a vehicle, truck, car ect get some pb blaster for rust and to clean the nasty from underneath or in the engine bay some purple power will be good
You should invest in a air hose and get a impact gun for that. Gets the bolts right away every time for me🤝🤟🏽
Sooooo we not gone talk about the RB mustang just chillin in the back 😳
You should switch out all your kick plate covers and make them light up and say hunt and Co or on your supra street hunter for any cars that have street hunter kits
Heat will be your best friend with rusting nuts and bolts. Invest in a good torch or nut heater bolts will come apart every time
Mustang is back at the shop. Sneak peak on throttles video.
Calvin was cracking me up while y’all were pulling the motor
We need bloopers at the end of the videos back haha
Calvin is funny in this video!
When the “bullet” is the slowest car in the garage LOL
Get the oven cleaner that will get rid of all that grease !!
The hoodie Kevin had on looked wicked
Aye bro get a pipe or something slide it over the handle of a breaker bar bolts come out 10 times easier. Make sure you hold the head of the breaker car tho
If your changing the exhaust just torch it. A lot faster and easier
Not TJ running from a harmless spider lmaooo
Mustang in the back looking fire boy
AYEEE TEEEEEJ can’t wait to see the new street hunter kit 👀
Ayyyyy come to Canada 🇨🇦 it’s funny to hear Californians talk about rust 😂😂😂😂😂 I just did cab corners and rockers on a ram truck cause they rusted out
Love how the scene after “Sabrina do got some big feet tho” got cut! 🤣as she’s walking away so you don’t film them lol
We now know Teej is scared of spiders time to give up his man card.🤣
Calvin = accessory boy! Between the noise cancelling ear protection, gloves, chains, cell phone hostlers, eye protection, rings, and black nails for such basic work around the shop?…. I can’t!
When did you get the mustang back at the shop????