I have a 05 Honda accord ex 2.4 and I’m struggling I can’t get any action to my throttle body position sensor sensor if already gone through four different ones and nothing I unplugged battery all night nothing that code is the only one popping up but running 1,500 rpm in park I can unplug sensor and nothing will happen ran voltage first yellow wire 5.03 middle red 0.03 last wire same can’t figure it out stuck
So i bought a 16 expedition that didnt have floor mats. I bought some weathertek mats. The next day the car ran like crap. I had to have it towed twice and the shop replaced the throttle body. I park on a hill and get an incline code. Cant drive it. I get it to the shop, they warranty the part. A week later it does it gain. I read it could. Be from floor mat blocking the sensor... 😮 pulled mat, we shall see if the problem is fixed.
No ut didn't work. Found out that it was a plug wire in a connection that was sometimes working and sometimes not. They replaced the pin and I've been going over since. Look at your connections and really inspect the pins.
Thank you, it helped a lot , did clean it and replaced the switch, the engine light still comes on, now check the pedal if I have one there. Its a 99 ford expedition, 5.4
so i have to clean the throttle body first, if that doesn’t work, replace it, and if that doesn’t work replace pedal sensor, perfect .. that’s $2000 for all that at my mechanic .. f me
Excellent job breaking down these error codes. Very much appreciated.
This video is super informative. Thanks for making content like this.
❤ Thanks i really love what you Say sir
Thx. At least now I know I'm on the right path. 🙏👀👆
I have a 05 Honda accord ex 2.4 and I’m struggling I can’t get any action to my throttle body position sensor sensor if already gone through four different ones and nothing I unplugged battery all night nothing that code is the only one popping up but running 1,500 rpm in park I can unplug sensor and nothing will happen ran voltage first yellow wire 5.03 middle red 0.03 last wire same can’t figure it out stuck
My 2008 bmw x5 won’t start but the check engine light came on I scan it and it saying it is the the throttle /pedal position sensor circuit high
TY
So i bought a 16 expedition that didnt have floor mats. I bought some weathertek mats. The next day the car ran like crap. I had to have it towed twice and the shop replaced the throttle body. I park on a hill and get an incline code. Cant drive it. I get it to the shop, they warranty the part. A week later it does it gain. I read it could. Be from floor mat blocking the sensor... 😮 pulled mat, we shall see if the problem is fixed.
Did it work?
No ut didn't work. Found out that it was a plug wire in a connection that was sometimes working and sometimes not. They replaced the pin and I've been going over since. Look at your connections and really inspect the pins.
@Beachesnoars yea I had some codes on a vw for my camshaft sensors. Messed around with the connections and the codes went away.
Hello , I have followed your video.i have the same problem Po122 on my ford
Would it cause my x5 to not start ?
That's what my OBD tool is saying I cleaned the T Body now I'm getting spark from the coil but not at the sparkplugs anyone knows what's going on?
Thank you, it helped a lot , did clean it and replaced the switch, the engine light still comes on, now check the pedal if I have one there. Its a 99 ford expedition, 5.4
My 2003 Lexus IS300 is havint a hesitation problem, I'd floor my gas pedal and she just doesn't want to accelerate correctly.... Now my idol is high
It also brings O/D OFF blinking
I’ll check the wire .
Can this cause gears to slip ? I just swapped my transmission and 3rd gear keeps slipping.
Nah. Thats low blinker fluid in the gigawatt dyehootser valve. Good luck.
so i have to clean the throttle body first, if that doesn’t work, replace it, and if that doesn’t work replace pedal sensor, perfect .. that’s $2000 for all that at my mechanic .. f me
That shouldn’t be over $500