Just an FYI: The part Number for the Remus Mufflers used is for the C7 A6 TDI. It sounds awesome though. Can you confirm you used 2.5" piping for all your custom exhaust to match up to the 63mm inlet to the mufflers?
Hello, I am thinking of buying this car. I know that 2.0tfsi engines burn oil. They reduce oil by 1 liter per 1000 km. Does 3.0 tfsi also have problems like this? or other problems.
This setup sounds great! Much better than the AWE Touring. Id like to have this on my C7. Do you have the part number for the xpipe, and muffler tips? I found the mufflers themselves. Thanks in advance
the tips were off ebay. if you contact remus they have sets of matching tips. As far as the xpipe it is the Magnaflow 11385. It is the Resonated X-pipe for a 2.25in exhast.
Hi, I’ve read all the posts and have got the part number for the magnaflow x-pipe, I was wondering if you had the part number for the Remus mufflers you used?
I still kept the front baby resonators by the cats. Replaced the center resonator with the magnaflow resonated x pipe, and have the remus C7 mufflers (part 048011 0500LR). I know remus makes a kit for the S4 specifically so you should check their website.
Thanks, those were the units I was looking at. So literally, its magnaflow 11385 x-pipe (but looks like a box unit) in place of mid pipe muffler and the two Remus mufflers put on the end..... Just confirming before putting my order in
Amazing. Do you have a link to the exact Remus mufflers you used? And do you have Downpipes as well? If you don't mind, I'd love the exact specs on this set up.
The part numbers are below in one of the comments. No downpipes. I just have the remus mufflers and a magnaflow resonated x pipe in the center muffler area.
there is a little drone. without the xpipe it was too loud and way too raspy. it was terrible. the resonated x-pipe replaced the originial midpipe muffler. I dont have a picture but i just replaced that part.
dluxx06 thanks for the quick reply. I think I'm going to start with the magnaflow resonated x pipe in place of the mid muffler (suitcase) then straight pipe / delete the down pipe resonators. Any thoughts?
Love that sound just got 2011 A6 guess I'm gonna have to come off some money cause those pipes not cheap!!! Is your car lowered??? Any rubbing with the 9" wheels? BTW nice car
There was a whole thread on Audizine comparing the two companies (APR and Chipwerke). Similar numbers but half the price. It is also with data logs showing very good findings. As for C6 chipwerke you might need to contact Murat with chipwerke. I do not know why they dont have it anymore but I did receive mine w/ the 3.0T C6 A6 specified box.
+Dylan Woythal If you are interested in a Chipwerke Pro for the C6 A6 3.0 TFSI, I am actually selling mine because im going stage 2. PM me if you are interested
Great work - nice sound ;)
🛩
Shit sounds gorgeous! Definitely looking into this set up for mine here real soon
i think it sounds great dude
Had Remus on my Acura Legend back in the day and It sounded great!
That Audi sounds nice as well!👍
If the remus mufflers are no longer being produced, what are some good alternatives?
Sounds grate, what are the rims?
Sounds amazing!!!
what wheels are those
Just an FYI: The part Number for the Remus Mufflers used is for the C7 A6 TDI. It sounds awesome though.
Can you confirm you used 2.5" piping for all your custom exhaust to match up to the 63mm inlet to the mufflers?
Yes. 2.5" exhaust piping all the way through
Wheels?
Great car!! 🔥👍🏻
Hello, I am thinking of buying this car.
I know that 2.0tfsi engines burn oil. They reduce oil by 1 liter per 1000 km.
Does 3.0 tfsi also have problems like this? or other problems.
hi friend what were the part numbers your escape configuration
Does this have the magnaflow resonated x pipe back in it?
So the A6 3.0t has the resonators up front that go into the suitcase and then the mufflers out back. Which did you replace?
声音真好听
Can’t seem to find the part numbers in the comments? Just need the x pipe part number pls! Thanks
Magnaflow 11385
Thanks a lot!
I love those Niche Misano m116 wheels, I have them in gunmetal on my touareg 3.0T hybrid
lovestheh20 thanks. These are the Verde Axis V99 wheels. Just got them powdercoat bunt copper
dluxx06 my bad, they look just like the misanos. Good looking wheel! Nice throaty exhaust
What are the part numbers for the magna flow mufflers?
LOVE the way this sounds wow can you provide the link to order this??
The part numbers are below I believe
dluxx06 I’m sorry I saw that, but it’s magnaflow or Remus??
@@fredjones5327 it's magnaflow xpipe and Remus mufflers
dluxx06 super nice!!!!!
that sounds really good :). What rear diffuser is that? Where did you buy it from? As far as i can see it is fitted to a regular bumper?! Thx
Where did you get the rear diffuser?
please advise me how to make it sound :) my car is 2010 a6 3.0t TFSI
The part numbers are below in the comments
Can anyone send me a link where I can get these ?
This setup sounds great! Much better than the AWE Touring. Id like to have this on my C7. Do you have the part number for the xpipe, and muffler tips? I found the mufflers themselves. Thanks in advance
the tips were off ebay. if you contact remus they have sets of matching tips. As far as the xpipe it is the Magnaflow 11385. It is the Resonated X-pipe for a 2.25in exhast.
dluxx06 Much appreciated!
Does it drone at all?
What tip did you go with i am looking at the remus swtup and it's only a dual setup not quad like yours.
I got some tips from Amazon that were single outlet to dual outlets. It's been a long time and they're not in stock anymore.
Hi, I’ve read all the posts and have got the part number for the magnaflow x-pipe, I was wondering if you had the part number for the Remus mufflers you used?
Also, is it resonated or non resonated? Would like your input as I’m looking to do the same set up on my 2014 S4. Thanks again.
I still kept the front baby resonators by the cats. Replaced the center resonator with the magnaflow resonated x pipe, and have the remus C7 mufflers (part 048011 0500LR). I know remus makes a kit for the S4 specifically so you should check their website.
Thanks, those were the units I was looking at. So literally, its magnaflow 11385 x-pipe (but looks like a box unit) in place of mid pipe muffler and the two Remus mufflers put on the end..... Just confirming before putting my order in
....obviously the Remus units would be 049208 0556LR for my S4 😎
.....lol, and was the axle back unit and not the Cat back unit
hey i want to know if u sill have the information on this set up
+lilCarlos42 yes i do. look at the other comments below. Part numbers are there
Amazing. Do you have a link to the exact Remus mufflers you used?
And do you have Downpipes as well? If you don't mind, I'd love the exact specs on this set up.
The part numbers are below in one of the comments. No downpipes. I just have the remus mufflers and a magnaflow resonated x pipe in the center muffler area.
Is this in stockton?
No. South Bay Area
Any drone with this setup? How does it sound without the x-pipe? Do you have a picture of where the x-pipe is installed?
there is a little drone. without the xpipe it was too loud and way too raspy. it was terrible. the resonated x-pipe replaced the originial midpipe muffler. I dont have a picture but i just replaced that part.
dluxx06 thanks for the quick reply. I think I'm going to start with the magnaflow resonated x pipe in place of the mid muffler (suitcase) then straight pipe / delete the down pipe resonators. Any thoughts?
Hey man were you able to get the Remus mufflers without buying the whole system?
Yes. It is basically a axel back setup
Love that sound just got 2011 A6 guess I'm gonna have to come off some money cause those pipes not cheap!!! Is your car lowered??? Any rubbing with the 9" wheels? BTW nice car
My car is lowered on Bilstein Coilovers. Yes I do rub but I plan to just roll my fenders a lil more to take care of it.
what price??
Please contact Remus for price.
What wheels do you have?
Jon Conwell Verde Axis V99 (20x9)
Have you mapped it too or is it stock other than the exhaust?
+Dylan Woythal
Right now I have a chipwerke pro on it and man it hauls ass
No joke those things work? I was going to go to APR for a full tune
The website doesnt have any 3.0 TFSI engine listed under C6... ?
There was a whole thread on Audizine comparing the two companies (APR and Chipwerke). Similar numbers but half the price. It is also with data logs showing very good findings.
As for C6 chipwerke you might need to contact Murat with chipwerke. I do not know why they dont have it anymore but I did receive mine w/ the 3.0T C6 A6 specified box.
+Dylan Woythal If you are interested in a Chipwerke Pro for the C6 A6 3.0 TFSI, I am actually selling mine because im going stage 2. PM me if you are interested
Chulada de sonido
Do you got Instagram
yes i do instagram.com/itzdluxxxson/
This sounds like a gtr
Damn 61k views
thats right lol
вот это выхлоп))
Hi. What rear diffuser is that?