I highly recommend his Weekend Woodworking course! It doesn't just teach you how to build certain projects, it teaches you the real fundamentals to enable you to build anything. Excellent course, so glad I went through it.
Just to be clear for those who might not know, although expansion and contraction is not an issue for plywood, but warping can be a BIG ISSUE, particularly if it is the cheaper grade plywood. I know. I've learned in painful ways. Glad you are back, Steve. I have learned so much from you.
I watch a lot of Woodworking videos. Steve is still my favourite - simple and straightforward with just the right amount of humour. A true pro - keep it up!
Steve, you are such a natural teacher and effective communicator. This was a short video but packed with things I didn't know, even as a moderately experienced hobbyist myself. Thanks for all you do.
Oh snap I'm one of the first commentators! Steve, I just want to take advantage of this to say that you are an amazing wood worker and very talented teacher. I learned so much from your channel and I am ready to start my little woodworking shop in the near future. Thank you very much for all your teachings!
I'm with you on that one Sebastian! I rolled through all of his videos having never bothered to even tough RUclips. Now I'm eager to learn and build thanks to Steve. Have a good one :)
I have been working with wood for many years and still learned something in this video. I want to thank you Steve for many years of making great videos, I really like your style. Also, I share your opinion on those "ugly" branch spots you talked about in the pine wood example. To find beauty in something not perfect is actually a view with a name, wabi-sabi. Look it up if you don't know about it, it is very interesting, many makers and artists, not only woodworkers, enhance the imperfections with great results.
Thanks Steve! I commented on your previous video about my stress over wood expansion/table tops. I hope that inspired this video. Consider me un-stressed! Also, for Father's day my wife purchased your Weekend Workshop course for me. I am excited!
Excellent primer! I have been working wood for a time now, but it always helps me to go back and review the basics about wood, especially since, as you say, attention to the wood itself typically does come later than a focus on tools and techniques. Thank you for this helpful video.
I agree with you. In my experience, an expert is not someone who knows the fancy stuff; I mean they usually do, but you can get a grasp of the fancy things by looking them up. An expert is someone who mastered the basics to the point where the fancy stuff is kinda obvious once seen.
man... the wood prices are really holding me back this year.. last year i was enjoying projects, and now i'm just saving videos from Steve and everyone else i follow, so i can do them when i can buy lumber/plywood at reasonable prices..
@@AdamKirbyMusic yes, actually i started doing more 3d printing + electronics + hardwood.. but yeah i can't make desks and cabinets which i planned to do.. lol
Thank you! This is so timely for me. I'm creating some smaller projects (mostly boxes) and was worried about how to build them the most cost-effectively but with longevity. This was so informative. I feel much more confident with my current build plan.
prices will be dropping soon. a lot of mills were caught off guard by the pandemic. they expected a drop in construction so they depleted inventory, also due to covid worker limitations but what happened was a lot of diners and other places constructed outdoor projects to be able to stay in business so there was an increased demand so everyone was caught short handed and prices skyrocketed. my deck cost me $300 more than planned
Great video! I learned about how wood expands the hard way when I glued bread board ends onto a table... Lets just say I have a video on my channel on fixing that mistake... I also glued it to the base. I pretty much made all of the mistakes...
Important note, that $1000 number is if you buy new. Steve gives tips on hunting down used stuff as well, and I was able to put together my whole set, including a rigid table saw that does fine with dados, for > $500 all in with some patience and a lot of watching craigslist. Also, The course is great and has you only get tools as you need them, so you don't even need the whole $500 to start. I got a used crosscut saw for $40 and a sander for $60 and that got me going (with the drill I already had)
This. I'm sure woodworking will be more fun as I get all the things, but I'm finding creative ways to make do with what I have. Example: I don't yet have a router. I am about to attempt some adjustable shelving. I plan to start with wood that is 1/2 the thickness that I want my uprights to be, and do a glue-up, leaving grooves for sliding in the shelves on the inside layer.
oh wow, the example of shrinking boards on your gate was really interesting. honestly the recession and the rising cost of lumber is much more stressful than a bit of wood movement 😅
Commenting just to shout out that I spotted a photo of you with, what looks to be at least, the legendary Tom Savini. Not sure if anyone has noticed in other vids, but this is my first time catching it, or at least the first time the camera was close enough to make out the details. Awesome and informative video as always, made better by the subliminal Savini inclusion. 👍
Great info Steve!! A few friends pester me about "the stack of CRAZY wood in the carport"...(they're not wood working people😜...!). Once seasoned...the plans come right out! They are never here to see that, only complain to the other half about the "noise and the sawdust mess".... OCD... I freely admit I "finish" my shop furniture.....3 coats of gloss battleship gray.(1-50/50 wash coat and 2 regular, sanding between), or linseed oil. I know, I know, I should seek professional help, but..... ROFL 🤣!.
Greetings from over the pond, I am someone who is a beginner woodworker at the very young age of 60 something and the last time I did any form of woodwork was at school. Either from you Steve or someone else in the comments, can give me some tips on making a functional work space from a small box room in my home. At present I have a table saw, a bandsaw, a bench drill, numerous power tools and some old and new hand tools. I have a good amount of recycled wood in my out building and in the house.
Hey Steve. Love all your videos. I'm starting to do rabbets now. But I was wondering what you meant when you said face grain touches face grain. From what I see, face grain on one piece never touches a face grain on the other piece. A rabbet gives you 3 points of connection versus 2 with a butt joint so it's definitely stronger. But it's always a face grain on end grain for the 3 touching sides.
old carpenters tip for screwing into end grain is to put some hardwood dowels on the end for the screws to go into, just as good as biting into face grain
for the wood movement what if you need to attach a tabletop to steel desk frame that already has pre drilled holes in a angle like bracket? Doing my first project and it's a 29 x 68 computer desk table top going on one of those height adjustable frame. Having a bit of hard time figuring how i want to attached it and if i should screw some cleats or cross member under the table.
Are there any issues with expension and contraction to keep in mind with open wood shelves and bookcases? In our large bathroom, I'd like to build a tall open wood shelf unit about 220cm x 160cm x 40cm for orchid growing and seed starting. In our office, a wall to wall, floor to ceiling bookcase. Our ceilings are about 270cm.
Nice touch Steve in including millimetre references when mentioning measurements in inches. Thank you!!
I highly recommend his Weekend Woodworking course! It doesn't just teach you how to build certain projects, it teaches you the real fundamentals to enable you to build anything. Excellent course, so glad I went through it.
Just to be clear for those who might not know, although expansion and contraction is not an issue for plywood, but warping can be a BIG ISSUE, particularly if it is the cheaper grade plywood. I know. I've learned in painful ways. Glad you are back, Steve. I have learned so much from you.
Just when I thought Steve switched to knitting because of the wood prices, there is another great video. Thanks Steve.
hahaha! That's a good one :)
LOL
He may have. No wood was purchased for the making of this video.
Have you seen the prices of quality Yarn?
Lumber isnt bad when u buy a woodmill for 5k hahaha
I watch a lot of Woodworking videos. Steve is still my favourite - simple and straightforward with just the right amount of humour. A true pro - keep it up!
Steve, you are such a natural teacher and effective communicator. This was a short video but packed with things I didn't know, even as a moderately experienced hobbyist myself. Thanks for all you do.
Oh snap I'm one of the first commentators! Steve, I just want to take advantage of this to say that you are an amazing wood worker and very talented teacher. I learned so much from your channel and I am ready to start my little woodworking shop in the near future. Thank you very much for all your teachings!
I'm with you on that one Sebastian! I rolled through all of his videos having never bothered to even tough RUclips. Now I'm eager to learn and build thanks to Steve. Have a good one :)
I have been working with wood for many years and still learned something in this video. I want to thank you Steve for many years of making great videos, I really like your style. Also, I share your opinion on those "ugly" branch spots you talked about in the pine wood example. To find beauty in something not perfect is actually a view with a name, wabi-sabi. Look it up if you don't know about it, it is very interesting, many makers and artists, not only woodworkers, enhance the imperfections with great results.
Thanks. The section on expansion was particularly informative for me.
I just want to say: Thank you Steve😇
Great info Steve!!!!! Great refresher for some of us "not so new" wood workers!!!!! Thanks Steve!!!!!
Thanks Steve! I commented on your previous video about my stress over wood expansion/table tops. I hope that inspired this video. Consider me un-stressed! Also, for Father's day my wife purchased your Weekend Workshop course for me. I am excited!
That's super thoughtful of your wife Jandy!!! I hope my wife is "listening" wink wink! Have a good one :D
I love these kind of general information videos
YES STEVE IS BACK WITH REAL VIDEO YESSSSSSSS, missed you brother
As always, straight forward and concise. Have enjoyed your videos for years. Cheers.
Kiln operator here! You’re speaking my language. Almost nobody ever talks about how important moisture content is
Nice to learn new stuff and have a refresher about some old. Good to see another woodworking video, too. Thanks!
Excellent primer! I have been working wood for a time now, but it always helps me to go back and review the basics about wood, especially since, as you say, attention to the wood itself typically does come later than a focus on tools and techniques. Thank you for this helpful video.
I agree with you. In my experience, an expert is not someone who knows the fancy stuff; I mean they usually do, but you can get a grasp of the fancy things by looking them up. An expert is someone who mastered the basics to the point where the fancy stuff is kinda obvious once seen.
I swear, as soon as I can, I find a bigger place to be able to follow your woodworking course.
Great video, thank you so much !
This is my go to place for relaxation Steve is great I've learned so much by accident actually because I started watching just to relax
man... the wood prices are really holding me back this year.. last year i was enjoying projects, and now i'm just saving videos from Steve and everyone else i follow, so i can do them when i can buy lumber/plywood at reasonable prices..
Really hope they come down soon. Killing me man.
Same here, I have a list of "next year's" projects, but the fence, the built-in for the basement, etc. are not happening this year.
Where are you guys located? Over here in Europe the wood got INSANELY expensive.
Buy some hardwood, which doesn't seem to be more expensive than pre-pandemic, and focus on small projects.
@@AdamKirbyMusic yes, actually i started doing more 3d printing + electronics + hardwood.. but yeah i can't make desks and cabinets which i planned to do.. lol
Thank you shout out from Kenya for your hard work
Thank you! This is so timely for me. I'm creating some smaller projects (mostly boxes) and was worried about how to build them the most cost-effectively but with longevity. This was so informative. I feel much more confident with my current build plan.
As always, an excellent lesson for all levels of woodworking! Thanks Steve! 😊
Thank you! Great information 👍. Peace and good fortune and good health to you and your family. 👍
Very well done Steve. This is a great video for new woodworkers
Great video Steve! Your content seems less frequent but I’m always grateful for new content
It made me smile to hear the OG theme music in the background! Or, at least one of the OG theme songs...
All ways great to watch and listen to you are one of a kind
Tools are no longer the most expensive part. Please send me a list where I can get all the wood I need for under @1,000!
🤣🤣🤣
Depends on whos wood you're talking about wink wink
Local sawmills
prices will be dropping soon. a lot of mills were caught off guard by the pandemic. they expected a drop in construction so they depleted inventory, also due to covid worker limitations but what happened was a lot of diners and other places constructed outdoor projects to be able to stay in business so there was an increased demand so everyone was caught short handed and prices skyrocketed. my deck cost me $300 more than planned
the forest
Great video Steve. Simple explanations about things the average novice (weekend) woodworker will probably run into.
Excellent video. Thanks so much for sharing.
Love the RUclips wood button behind you.
Love you Steve!
Great video bro, need more of these 💪🏼
Nice reminders Steve, have a great day
Beautiful idea
Lot of good info in this video! Thanks Steve!
Thank you for the great information. Really enjoy your videos.
Thanks for posting Steve
Great video! I learned about how wood expands the hard way when I glued bread board ends onto a table... Lets just say I have a video on my channel on fixing that mistake... I also glued it to the base. I pretty much made all of the mistakes...
Putting finish on shop projects can be a great way to gain experience and try out different finishing techniques.
Thanks Steve, great advice for me as a beginner
Princess Meow Meow’s theme! Haven’t heard it in forever and i just love it.
Cedar is absolutely gorgeous green wood.
Fantastic tips, Steve! Thanks a lot! 😃
Stay safe there with your family! 🖖😊
Excellent, excellent video, Steve!
Important note, that $1000 number is if you buy new. Steve gives tips on hunting down used stuff as well, and I was able to put together my whole set, including a rigid table saw that does fine with dados, for > $500 all in with some patience and a lot of watching craigslist.
Also, The course is great and has you only get tools as you need them, so you don't even need the whole $500 to start. I got a used crosscut saw for $40 and a sander for $60 and that got me going (with the drill I already had)
This. I'm sure woodworking will be more fun as I get all the things, but I'm finding creative ways to make do with what I have. Example: I don't yet have a router. I am about to attempt some adjustable shelving. I plan to start with wood that is 1/2 the thickness that I want my uprights to be, and do a glue-up, leaving grooves for sliding in the shelves on the inside layer.
Shop projects are the best way to experiment with new finishing techniques.
Great video. I learned a few things that will definitely help. Thanks Steve!
Steve, Great video which Im sure you will make part of your New Woodworker instructional series! Very well done Sir!!
Very informative and helpful…thanks
Thank you Steve. That was very informative.
Excellent video Steve!
Aged pine is one of my absolute favorites!
Great video. Thanks Steve!
Also great hair today my friend! So tidy and natural. I know that's odd to mention but compliments where compliments are due.
Really great vid sir. Lots of good info, well presented.
Nice designs"
I agree, cherry looks great!
Excellent. Even for non beginners.
Thought I wouldn't discover anything new in this video. I was wrong, never thought about wood changing colour.
Great presentation as always!
Thanks very muchly. Learnt a lot.
I really enjoy your videos, thanks for that! Also... great haircut!
#6- it’s ok to not make things exactly perfect like they do on social media.
Hell yeah #6 works most definitely for me😉👍🏻
we don't need any more epoxy or exposed bark "perfection"
Agreed. And to add to this, most mistakes that might be glaringly obvious to woodworkers will never be noticed by most other people.
This is definitely what I needed to see, thank you 😭
Even they don’t all the time. The video may show that but in many cases they are as expert in correcting mistakes as they are in completing pieces.
Good one, Mr. Steve.
Thanks for the metric dimensions at the bottom!
oh wow, the example of shrinking boards on your gate was really interesting. honestly the recession and the rising cost of lumber is much more stressful than a bit of wood movement 😅
I think ur amazing and have given me a lot of info that has helped me thank you from all ur videos
GREAT video Steve! Very helpful. And I’m glad you gave up knitting…
Commenting just to shout out that I spotted a photo of you with, what looks to be at least, the legendary Tom Savini. Not sure if anyone has noticed in other vids, but this is my first time catching it, or at least the first time the camera was close enough to make out the details. Awesome and informative video as always, made better by the subliminal Savini inclusion. 👍
Hi, Steve. Thank you for that precious tips. I learn a lot from you.
Thanks for so much of info in a short vid
Great info Steve!! A few friends pester me about "the stack of CRAZY wood in the carport"...(they're not wood working people😜...!). Once seasoned...the plans come right out! They are never here to see that, only complain to the other half about the "noise and the sawdust mess"....
OCD... I freely admit I "finish" my shop furniture.....3 coats of gloss battleship gray.(1-50/50 wash coat and 2 regular, sanding between), or linseed oil. I know, I know, I should seek professional help, but..... ROFL 🤣!.
This man speaks volumes of experience. Listen to him and watch his videos. You'll not be sorry!
My mind expanded listening to all your information🤣. Cheers from India 🇮🇳.
Thank you so much for the informative contents! I really am learning from your videos sir!
Great info in this video, learned a few things, thanks from one Steve to another.
Investing is how you create wealth,I started investing from pandemic crash👍
Bugger off mate
Most inteIligent words I've heard.
Crypto is the new goId
I wanted to trade Crypto but got discouraged by the fluctuations in price
@@michealjones2365 That won't bother you if you trade with a professionaI Iike Mr Patrick grey
Adding oil to wood is the main reason I got into wood working
Greetings from over the pond, I am someone who is a beginner woodworker at the very young age of 60 something and the last time I did any form of woodwork was at school. Either from you Steve or someone else in the comments, can give me some tips on making a functional work space from a small box room in my home. At present I have a table saw, a bandsaw, a bench drill, numerous power tools and some old and new hand tools.
I have a good amount of recycled wood in my out building and in the house.
This was fun! I know this stuff but it was still fun. My take on cabinet doors is the grain runs in the long direction of the panel, regardless.
Will coating wood in resin keep wood color the same?
brilliant ty Steve
Another great beginners video but I miss the lockdown videos.....
Steve is awesome! He helped me from start to finish in my first woodworking project: an office desk! His channel is really helpful!
Thanks, great info. 👍
Thank you!
4:22 Jumanji next level
thanks
This is excellent
Do you have a video that explains the topic of wood i.e soft vs hard vs engineered wood and how to choose between them?
Thankyou
Thanks. Great video.
Hey Steve. Love all your videos. I'm starting to do rabbets now. But I was wondering what you meant when you said face grain touches face grain. From what I see, face grain on one piece never touches a face grain on the other piece. A rabbet gives you 3 points of connection versus 2 with a butt joint so it's definitely stronger. But it's always a face grain on end grain for the 3 touching sides.
Hi Steve, long time! Your doing excellent it seems!
👍👍. @DesertWoodworking
Lake Havasu ☀️ AZ
Great video as usual. Can you show us different methods for breadboard ends? Will be greatly appreciated. Thanks again for all these tips!
old carpenters tip for screwing into end grain is to put some hardwood dowels on the end for the screws to go into, just as good as biting into face grain
for the wood movement what if you need to attach a tabletop to steel desk frame that already has pre drilled holes in a angle like bracket?
Doing my first project and it's a 29 x 68 computer desk table top going on one of those height adjustable frame. Having a bit of hard time figuring how i want to attached it and if i should screw some cleats or cross member under the table.
Are there any issues with expension and contraction to keep in mind with open wood shelves and bookcases?
In our large bathroom, I'd like to build a tall open wood shelf unit about 220cm x 160cm x 40cm for orchid growing and seed starting.
In our office, a wall to wall, floor to ceiling bookcase. Our ceilings are about 270cm.
Bathroom shelf unit about 86.6in x 63in x 15.7in
Bookcase ceiling height about 8.85ft
Following for this answer. I have a massive library shelf project in my future.