OK so who skipped forward to the END for the OUTTAKES and who watched every minute? Are you a DESSERT FIRST kinda person or did you enjoy the meal? Father Chop is in and now taking confessions 😁
Thanks Chad! We must all do our part to make the Portaband feel welcomed. As for tool jealousy, they can bring that if they want to but I have done it with and without the brake so why not share 😁 Super appreciate you taking the time this morning to watch and leave a comment! 🙇🏻♂️
Any chance you ever measured the current draw of your brake? I just got mine wired up and running, and I'm measuring 17.5A RMS current draw, during bending, compared to the 10A rating on the panel. I uploaded a video yesterday on the buck transformer install, and the excessive current was just an incidental discovery as I was trying to illustrate how the transformer works.
@@HouseofChop If you ever have a chance, I'd love to know. Interestingly, it only shows 17.5A when measuring with a True RMS meter, like a Fluke, or a scope with a current probe. A cheap Cen-Tech that reads average current only shows 11A. Baileigh is sending me a replacement circuit board, to see if it makes a difference.
The manual shows 220V (±5%), 1ph, 60hz, 12A. What voltage did you feed to it, from the buck transformer? Does the wattage add up to the 2640 watts I get from their number, or is it way over? Have you used the machine much? I am interested in buying one and wondered if it is worth double the price of a finger brake.
@@Clough42 Yes, I was wondering if the high amperage was just due to lower voltage, but I figured it would have to be very low for it to be as high as you said. It looks like that is 3867 watts......much higher than what the manual showed. I will check out your videos, Thanks!
YES!!! YOU GET EM!!! Shoot me a DM with your address over on Instagram and I'll get Tiglet aloft and headed your way! Appreciate the kind words! As long as you guys keep watching them I'll keep making them. 🔥👍🏼🔥 It would help me a ton if you shared the video with a couple of friends. 😉
Phil, I absolutely love that Baleigh Mag Brake! I first noticed in one of your other Videos I watched some time ago. I have a question about it that I will send you in a DM on Instagram. Great Video, you always make them fun to watch. I would love to spend a weekend working in the Shop with you. You are a Character, and I mean that in the kindest way possible Brother. Always Smiling & Laughing. The world would be a better place if more people went about their day with your attitude. Best Regards, Phillip Chambers
Cross Cut Creations Yes!!! Thank you. I had a blast making the video. The challenge of making eight bends watchable kept it fresh. Appreciate you taking the time to watch and leave a comment 🔥👍🏼🔥
This is an all around great video. As always your entertainment factor is pegging the needle, but the tutorial content is instructive and well paced too. Great job Philip. Keep it coming!
Who doesn't love the Portaband? 🤣 Thank you for the generous words! I super appreciate you taking the time to watch and comment. The best way for me to grow this thing is awsome people like yourself spreading the word and getting these view counts up. If the videos are seen and liked the algorithm will eventually find them and with luck, the magic will happen 🔥👍🏼🔥
Thank you For watching Glenn! always appreciate your feedback! Shoot me your address in a DM on instagram and I'll Get Tiglet aloft and headed your way. 😉
Thanks for taking the time to check out the video Alan. Those only satisfying about the takes taking too long is getting everyone to laugh at them later. 🔥👍🏼🔥
Awesome video and killer channel! I haven't included outtakes in my videos, but man it was like watching myself at the end. That's exactly how this process goes. Looking forward to more content! 👍
Team 512 Thanks man! Appreciate you jumping over to have a look. Looks like you have some awesome content going on yourself. Looking forward to digging in 🔥👍🏼🔥
Thanks man! They all give us another opportunity to look at something and get better. I enjoyed trying to make eight bends interesting with the video. Appreciate you taking the time to watch 🙌🏼🙇🏻
Super appreciate you taking the time to watch and comment! 🔥👍🏼🔥 That Mag Brake is such an awesome tool. The only limits are really the imagination. More over on Instagram if you are interested @house.of.chop
Brothers from different mothers, you and me have the same CAD system 🤣🤣 best out take quote “don’t you bite me portaband” 😂 as always the “Upbeat positivity runs strong in this one yes it does” said in the best yoda voice 🙏🙏🙏
Looking to buy the Baileigh BB-4816M Magnetic Sheet Metal Box and Pan Brake. Looking for some advice on power for it. They are very specific on the 220v power feed. What do you do to bring down your 240v to 220v? Thanks! Subscribed!
Wrenchin Nerd Thank you for the sub! You’re going to be happy with it when you get it in your shop. To reduce the voltage I installed a “Buck/Booster” on the back side of the machine. It’s a self contained unit you could have put it anywhere. That dropped my voltage into the acceptable threshold they recommended. I actually found one that was used for around $60. They can add a few hundred to the price. If you have any other questions don’t hesitate to reach out 🔥👍🏼🔥
YES!!! YOU GET EM!!! Shoot me a DM with your address over on Instagram and I'll get Tiglet aloft and headed your way! Thank you for checking out the video 🔥👍🏼🔥
YOU GET THE STICKERS!!! 🔥👍🏼🔥 Gotta love that Cardboard Aided Design almost as much as the PortaBand 🤣 Shoot me a DM with your address over on Instagram and I'll get Tiglet headed your way with the goods 🔥👍🏼🔥
YES! That mag brake is a awesome piece of equipment! So glad I could make you laugh this morning. Thank you for taking a few moments to watch. You’re the best 🔥👍🏼🔥
Thank you for spending some time with me today! 🔥👍🏼🔥 I figure the sub count is just part of the process. Eventually, I'll get there. What would help a ton is if you shared the video with some people or pointed them in my direction. Till the view counts are up the algorithm will not push the videos. 😉
@House of Chop Philip, how much did the Baleigh run? I've been wanting one for a long time, thinking about pulling the Trigger on one this year. It would definitely speed things up. You know what they say, "time is money"
Absolutely! I actually use it a whole lot more than I thought I would when I picked it up. I bought it when they were running an insane deal on them for $1750. Since then the price has gone up quite a bit but I have seen them used at really attractive numbers so don’t count that out. 😉
@@phillipchambers8487 I looked for years and never found a used one. After buying a new one and using it, I can see why. Once you play with one of these you'd never want to sell it!
Delighted you enjoyed it! That's the goal to keep it fun and make more videos. Appreciate you taking the time to watch and comment. 🔥👍🏼🔥 It would help me a ton if you shared the channel with friends or even enemies. Getting the view counts up would help big time with the algorithm. 😉
OK so who skipped forward to the END for the OUTTAKES and who watched every minute?
Are you a DESSERT FIRST kinda person or did you enjoy the meal?
Father Chop is in and now taking confessions 😁
START TO FINISH. 😂😂 All while lovin’ the Porta-Band.
@@nosferatu49426 GOTTA spread that Portaband LOVE! 🤣🙌🏼
Thank you for spending 9 minutes and 22 seconds with the HoC today! 🔥👍🏼🔥
Not me brother. I love working up to the suspense! 😂😂😂
Iron Shepherd Forge Yes!!! My hero! 🤣🙌🏼
House of Chop 😂😂😂😂
Excellent video and solution Phil 👌not forgetting the outtakes 😂👍
Thank you Darrell! I couldn't get past the portaband moment in the video and had to share. 🤣
I love the portaband. I like how you shut down the tool jealousy comments. I would love that magnetic brake though.
Thanks Chad! We must all do our part to make the Portaband feel welcomed.
As for tool jealousy, they can bring that if they want to but I have done it with and without the brake so why not share 😁
Super appreciate you taking the time this morning to watch and leave a comment! 🙇🏻♂️
Any chance you ever measured the current draw of your brake? I just got mine wired up and running, and I'm measuring 17.5A RMS current draw, during bending, compared to the 10A rating on the panel. I uploaded a video yesterday on the buck transformer install, and the excessive current was just an incidental discovery as I was trying to illustrate how the transformer works.
I haven’t checked the draw. That’s intriguing it draws that much more. I just set up the buck and started using it.
@@HouseofChop If you ever have a chance, I'd love to know. Interestingly, it only shows 17.5A when measuring with a True RMS meter, like a Fluke, or a scope with a current probe. A cheap Cen-Tech that reads average current only shows 11A. Baileigh is sending me a replacement circuit board, to see if it makes a difference.
The manual shows 220V (±5%), 1ph, 60hz, 12A. What voltage did you feed to it, from the buck transformer? Does the wattage add up to the 2640 watts I get from their number, or is it way over? Have you used the machine much? I am interested in buying one and wondered if it is worth double the price of a finger brake.
@@CGT80 if you're asking me, I believe it was 221V. I did a couple of videos on it.
@@Clough42 Yes, I was wondering if the high amperage was just due to lower voltage, but I figured it would have to be very low for it to be as high as you said. It looks like that is 3867 watts......much higher than what the manual showed. I will check out your videos, Thanks!
I WANT STICKERS! LOL awesome vid man. Your channel is awesome keep plugging away
YES!!! YOU GET EM!!!
Shoot me a DM with your address over on Instagram and I'll get Tiglet aloft and headed your way!
Appreciate the kind words! As long as you guys keep watching them I'll keep making them. 🔥👍🏼🔥
It would help me a ton if you shared the video with a couple of friends. 😉
Right on! I’m going to go twist up a phone holder, or something. Thanks for the inspiration to make stuff!
Hell yeah!!! Now that’s a great comment! Build the crap out of something!!! Absolutely my pleasure to provide the inspiration 🔥👍🏼🔥
Love your energy...man I wish we were in the same town! We'd make killer content.
Nice little demo of this brake
Thank you. It's a tool that offers a whole lot of options. I appreciate you watching 🔥👍🏼🔥
Phil, I absolutely love that Baleigh Mag Brake! I first noticed in one of your other Videos I watched some time ago. I have a question about it that I will send you in a DM on Instagram.
Great Video, you always make them fun to watch. I would love to spend a weekend working in the Shop with you. You are a Character, and I mean that in the kindest way possible Brother. Always Smiling & Laughing. The world would be a better place if more people went about their day with your attitude.
Best Regards, Phillip Chambers
Nice work Chop! Man... that magnetic brake is SAWEEET!
Donny Carter Thanks Donny! That brake is a blast. If it’s attracted to a magnet it can be used as a bending bar. Opens up some real possibilities 🔥👍🏼🔥
Awesome, simple, but super practical. Great project!
Cross Cut Creations Yes!!! Thank you. I had a blast making the video. The challenge of making eight bends watchable kept it fresh.
Appreciate you taking the time to watch and leave a comment 🔥👍🏼🔥
This is an all around great video. As always your entertainment factor is pegging the needle, but the tutorial content is instructive and well paced too. Great job Philip. Keep it coming!
Thank you Bernie! I take that as a great complement coming from you. 🙌🏼🙇🏻♂️
Awesome video Phil!!
Thank you Chris! Had a blast making this one. Who knew 8 little bends could be so rewarding. 🔥👍🏼🔥
How do you not have 10x more followers? You gotta love the portaband!
Who doesn't love the Portaband? 🤣
Thank you for the generous words! I super appreciate you taking the time to watch and comment.
The best way for me to grow this thing is awsome people like yourself spreading the word and getting these view counts up.
If the videos are seen and liked the algorithm will eventually find them and with luck, the magic will happen 🔥👍🏼🔥
Gotta love the portaband 🤣 I like the outtake, there always fun to watch lol oh and nice phone holder too 👊🏽
Is it to late to say (i want stickers) 🤣
Thank you For watching Glenn! always appreciate your feedback!
Shoot me your address in a DM on instagram and I'll Get Tiglet aloft and headed your way. 😉
I WANT STICKERS! ⚡️💥🤓
Don’t bite me portaband!
YOU GOT EM!!!!! 🔥👍🏼🔥
Sent you a email 😉
I always forget to save my outtakes. Sooner or later I'll remember. Good stuff. 👍👍
Thanks for taking the time to check out the video Alan. Those only satisfying about the takes taking too long is getting everyone to laugh at them later. 🔥👍🏼🔥
Great Video Phil!!
Thank you man! Always appreciate your support thank you for jumping over and taking a look. 🔥👍🏼🔥
You know what I really like ? Metal crates and boxes. Could you make a foldable, stackable metal box like the Zarges aluminium box from the 50´s ?
Awesome video and killer channel! I haven't included outtakes in my videos, but man it was like watching myself at the end. That's exactly how this process goes. Looking forward to more content! 👍
Team 512 Thanks man! Appreciate you jumping over to have a look. Looks like you have some awesome content going on yourself. Looking forward to digging in 🔥👍🏼🔥
House of Chop Thanks so much for the kind words and checking out the channel. 👍
It’s the little projects that count!👌 awesome vid Chop!
Thanks man! They all give us another opportunity to look at something and get better. I enjoyed trying to make eight bends interesting with the video. Appreciate you taking the time to watch 🙌🏼🙇🏻
Awesome video , 👍👍,nice work 👍
Thank you Mark! Always appreciate your support! 🔥👍🏼🔥
@@HouseofChop , always 👍👊👊
I enjoy this
mitchell fillyaw Awesome! Thank you for watching 🔥👍🏼🔥
Great video, so energizing! : ) Love that mag brake! Project turned out awesome. Mahalo for sharing! : )
Super appreciate you taking the time to watch and comment! 🔥👍🏼🔥
That Mag Brake is such an awesome tool. The only limits are really the imagination.
More over on Instagram if you are interested @house.of.chop
Brothers from different mothers, you and me have the same CAD system 🤣🤣 best out take quote “don’t you bite me portaband” 😂 as always the “Upbeat positivity runs strong in this one yes it does” said in the best yoda voice 🙏🙏🙏
Man Cave Makings Most reliable CAD EVER!!! That portaband is a man eater gotta watch out. Thank you for spending some time with me today! 🔥👍🏼🔥
House of Chop your more than welcome my man! 👍
Dang Phil! Your energy makes me tired AND inspired all at the same time!
Hahahaha! That’s awesome, I think. 😁
Thank you for spending some time with the HoC. Super appreciate you taking the time to leave a comment. 🙌🏼🙇🏻
Looking to buy the Baileigh BB-4816M Magnetic Sheet Metal Box and Pan Brake. Looking for some advice on power for it. They are very specific on the 220v power feed. What do you do to bring down your 240v to 220v? Thanks! Subscribed!
Wrenchin Nerd Thank you for the sub!
You’re going to be happy with it when you get it in your shop. To reduce the voltage I installed a “Buck/Booster” on the back side of the machine. It’s a self contained unit you could have put it anywhere. That dropped my voltage into the acceptable threshold they recommended.
I actually found one that was used for around $60. They can add a few hundred to the price. If you have any other questions don’t hesitate to reach out 🔥👍🏼🔥
I wanted stickers but now I'm just here to support, love the dramatic C-Cad music choice 👍
Thank you Chris! You're the man! 🔥👍🏼🔥
I want stickers! Great video
YES!!! YOU GET EM!!!
Shoot me a DM with your address over on Instagram and I'll get Tiglet aloft and headed your way!
Thank you for checking out the video 🔥👍🏼🔥
I want stickers!!!!! Cardboard cad is the best.
YOU GET THE STICKERS!!! 🔥👍🏼🔥
Gotta love that Cardboard Aided Design almost as much as the PortaBand 🤣
Shoot me a DM with your address over on Instagram and I'll get Tiglet headed your way with the goods 🔥👍🏼🔥
Love the video as always! And I want stickers!
YES!!! Thank you for watching on here and over in IG since day one!
I'll get Tiglet aloft and headed your way with all the sticky goodness! 🤣
Awesome.. i need one of those breaks for sure.
That brake is magical! I use it all the time. 🔥👍🏼🔥
Great Video. How does the brake do with full length bends on 0.063 5052 aluminum?
Thank you! Can’t for sure say but I have bent .050 3003 at that distance without issue. 😉
Lmfao. Love the magnetic thing lol
YES! That mag brake is a awesome piece of equipment! So glad I could make you laugh this morning. Thank you for taking a few moments to watch. You’re the best 🔥👍🏼🔥
Kool,
how do you only have 2k subs?! 🤔🤔
Thank you for spending some time with me today! 🔥👍🏼🔥
I figure the sub count is just part of the process. Eventually, I'll get there.
What would help a ton is if you shared the video with some people or pointed them in my direction.
Till the view counts are up the algorithm will not push the videos. 😉
@House of Chop Philip, how much did the Baleigh run? I've been wanting one for a long time, thinking about pulling the Trigger on one this year. It would definitely speed things up. You know what they say, "time is money"
Absolutely! I actually use it a whole lot more than I thought I would when I picked it up. I bought it when they were running an insane deal on them for $1750. Since then the price has gone up quite a bit but I have seen them used at really attractive numbers so don’t count that out. 😉
@@HouseofChop Thanks Buddy. I will start keeping my eye out for gently used ones.
@@phillipchambers8487 I looked for years and never found a used one. After buying a new one and using it, I can see why. Once you play with one of these you'd never want to sell it!
That brake is legit. What's the thickness it can bend?
Love it
Derek From Malden Thank you sir! Appreciate you spending some time with the HoC
🔥👍🏼🔥
Hi. I’m just wondering would this brake Bend 1/8” aluminum sheet?
That way exceeds the capability of this brake. It would be awesome if it could.
Will the thing hold and bend 1/16" aluminum?
It’s definitely out side of spec but over shorter distances it will. I’ve bent 1/8” aluminum with it.
That was 🤣🤣🤣🤣🤣😂😂😂😂 make more videos please
Delighted you enjoyed it!
That's the goal to keep it fun and make more videos.
Appreciate you taking the time to watch and comment. 🔥👍🏼🔥
It would help me a ton if you shared the channel with friends or even enemies.
Getting the view counts up would help big time with the algorithm. 😉
Were you wearing eye & respiratory protection while sanding? 🤔🤔🤔🤔😳😳
Always! I'm a huge stickler for safety. I want to be doing this for a long time.
Thank you for looking out! 🔥👍🏼🔥
Can I buy two?
I want stickers!!
Shoot me a DM over on instagram with your address and I'll get Tiglet right on it. 🔥👍🏼🔥
scribing on aluminum will cause cracks down the line if it was an automotive or airplane part, not so much an issue here
Am I to late for I want stickers?
Did you Subscribe? 😁
If you did, shoot me a DM on Instagram with your address and I'll get Tiglet to drop off some stickers. 😉
I want stickers
You get em!! Shoot me a DM over on Instagram with your address and I'll get Tiglet out to you with the goods.