Not just like a Bending Machine / Straightening / Press

Поделиться
HTML-код
  • Опубликовано: 1 янв 2025

Комментарии • 347

  • @sethwiles1255
    @sethwiles1255 10 месяцев назад +80

    Incredible work! And thank you so so much for no unnecessary music or commentary!!!

    • @TheMetalist
      @TheMetalist  10 месяцев назад +5

      Thank you 😊

    • @runsolo7418
      @runsolo7418 10 месяцев назад +4

      Exactly! Let me listen to what I like, while I watch the DIY bending machine come to life.

  • @Syncopia
    @Syncopia 9 месяцев назад +17

    This guy is not only an artisan level craftsman but a talented engineer.

    • @TheMetalist
      @TheMetalist  9 месяцев назад

      Thank you 😊

    • @rogerbrandt6678
      @rogerbrandt6678 8 месяцев назад +1

      @@TheMetalistI’ve ran brakes for years, you could make a smaller bottom die for a tighter bend, or even put a smaller piece of angle iron in and your radius will be a lot tighter.

    • @oneproudbrowncoat
      @oneproudbrowncoat 4 месяца назад +1

      ​@@TheMetalistHi, which burrs were used at min 1:53?

    • @TheMetalist
      @TheMetalist  4 месяца назад

      @@oneproudbrowncoat it's a copy burr from Pferd

  • @paulnewton943
    @paulnewton943 10 месяцев назад +21

    It's refreshing to see people still know how to work hand tools. And well! Nice tool 😘

    • @TheMetalist
      @TheMetalist  10 месяцев назад +1

      Thank you 💪😁

    • @bobmcdougal7501
      @bobmcdougal7501 Месяц назад

      You consider a Tig welder, drill press, and mag drill to be a hand tools?

  • @nickarcher8617
    @nickarcher8617 9 месяцев назад +5

    Awesome. I need exactly one of these. I've been following a long time. Im really glad to see how you've grown from building your own bench to where you are now. This is an awesome custom tool.

  • @phoschnizzle826
    @phoschnizzle826 9 месяцев назад +2

    Outstanding design! The versatility of this unit really shines through.

  • @MikeYurbasovich
    @MikeYurbasovich 9 месяцев назад +3

    I like your bender. Also a crafty guy, I appreciate the work of others. You do a lot with very little.

  • @Factory400
    @Factory400 10 месяцев назад +19

    It is this moment where I am most thankful for my CNC milling machine 😂
    Perhaps I am too lazy to be this creative with tools. Amazing outcome with basic tools.
    Bravo.

    • @barrylinkiewich9688
      @barrylinkiewich9688 10 месяцев назад +1

      Same, I'd have done a whole bunch of this on the laser at work while sipping a drink. I don't wanna work this hard haha.

    • @mcamodell
      @mcamodell 10 месяцев назад +2

      BASIC tools?!?!? WTF? There nothing basic about those tools, you cannot even FIND those in a normal hardware store

    • @lainethm
      @lainethm 9 месяцев назад +1

      @@mcamodellThose are not basic consumer tools but pro grade tools. I think @Factory400 ment hand tools.

    • @mcamodell
      @mcamodell 9 месяцев назад +1

      @@lainethm "Amazing outcome with basic tools"

  • @MillerBSAA
    @MillerBSAA 10 месяцев назад +7

    Oh Mann, einfach geil! Ich bin gerade an 2 Projekten von dir am Nachbauen und jetzt kommt das nächste Ding auf meine Wunschliste.
    Ich hab schlossern als Hobby angefangen und deine Pläne sind echt dankbar für Noobs wie mich ;)
    Ich lern echt viel dabei und es macht Spaß. Und vor allem wenn man es selber macht, merkt man erst wie viel Arbeit das ist.
    Auf jeden Fall, danke für deine tollen Projekte!! Du tust dir da echt was an.

    • @TheMetalist
      @TheMetalist  10 месяцев назад +1

      Vielen Dank 😊
      Ja ist ja auch mein Hobby 😁

  • @trashes_to_treasures
    @trashes_to_treasures 5 месяцев назад +2

    I know that someone is a master of their craft when I come back from time to time to re-watch their videos just to enjoy seeing beautiful products come to life, beautifully filmed and edited.

  • @MichaelGraham-i5q
    @MichaelGraham-i5q 10 месяцев назад +4

    Beautiful. A real pleasure in watching you work. All the small details, chamfering the holes and edges. Neat tool for breaking the edge on your slots too. Great bender, great work. Thanks.

  • @Branhawk
    @Branhawk 9 месяцев назад +3

    Your an absolute wizard, very nice.

  • @svenjudge9347
    @svenjudge9347 10 месяцев назад +3

    Einfach nur geil dir zuzusehen. Das ist ganz tolle Handwerkskunst und super um sich Inspirationen zu holen👌

  • @465maltbie
    @465maltbie 10 месяцев назад +9

    Nicely done and well thought out, thanks for sharing. Charles

  • @FlorianBeck_762
    @FlorianBeck_762 10 месяцев назад +9

    Schade das nicht jeden Sonntag ein Video kommt mit geilen DIY Sachen. Wieder einmal eine geile Vorrrichtung die du da gebaut hast 👍🏻

    • @TheMetalist
      @TheMetalist  10 месяцев назад +1

      Ja jede Woche das wäre schön vl klappt das irgendwann mal 😉

  • @jacobspeas68
    @jacobspeas68 9 месяцев назад +2

    Why did I watch this?! 😂 I now see more tools and bits I need to buy. My wife is NOT going to be pleased.
    Really nice work!! Thanks for taking the time to show us. I’ll see if I can put it in the mix for this Summer’s projects.

    • @TheMetalist
      @TheMetalist  9 месяцев назад

      Awesome, thank you 😁

  • @pamdunn8454
    @pamdunn8454 10 месяцев назад +5

    another brilliant design , an idea came to me when you upended the machine "vertically" this would work perfect for (dimple dies) i will be constructing one for myself in the future , thanks for sharing

    • @TheMetalist
      @TheMetalist  10 месяцев назад +2

      Thank you 😊
      Awesome send me some pics if it's ready 😁

  • @boltonky
    @boltonky 9 месяцев назад +2

    Awesome work and good show of skills and thought :) - keep it up
    One day i hope i live somewhere were tools and materials aren't so expensive that I can do projects or have fun making stuff without the thought of the repercussions of not having food or a roof over my head (Life can be hard but doesn't mean not to dream)

  • @dougmorgan6616
    @dougmorgan6616 10 месяцев назад +2

    You've got some really cool toys, and good ideas.

  • @DT-jz3wn
    @DT-jz3wn 10 месяцев назад +2

    Damn you! I love it. You have made me want something that I didn't know I needed.

  • @wagoyokonibaouattara3767
    @wagoyokonibaouattara3767 10 месяцев назад +3

    Salut le BOOS . vous êtes super grave . merci pour le bendeur à mollets multiples. Big j'aime ! W

  • @d.bcooper7819
    @d.bcooper7819 9 месяцев назад

    Perfection. I am a flooring guy and I wasn’t able to take my eyes off the screen. Thank you so much for the excellent editing!

  • @boko.youtube
    @boko.youtube 9 месяцев назад +2

    Love it - we made a small press for bending inside corners on letters - but it is hydraulic - this is a great project! I will use it as inspiration for the next build for sure!

  • @Sp1der44
    @Sp1der44 9 месяцев назад +2

    Brilliant design. Great video! 👍

  • @tereg5
    @tereg5 9 месяцев назад +4

    I bought your welding table build plans and it was great step by step. I've been searching the web trying to find a good drill tap set. Can mention what taps you use and counter sink bits you use in your builds. Your fabrication builds are the BEST I've seen. Thanks for sharing your builds with the world 🌍🙌

  • @aleksandarbogdanov303
    @aleksandarbogdanov303 10 месяцев назад +3

    Show off :D - хаха
    Btw - nice work man.
    Good for you.
    You are a true craftsman.
    Respect !

  • @manfredmuller2925
    @manfredmuller2925 10 месяцев назад +3

    Du machst wirklich klasse Werkzeug, klasse und pragmatisch

  • @ctpctp
    @ctpctp 9 месяцев назад +2

    First off - AWESOME build!!! Secondly - DANG I am glad I own a mill 😀

  • @TheRay280
    @TheRay280 10 месяцев назад +3

    🎉🥳💪🏻👍🏻 wieder geil, das Video und das Ergebnis.
    Jetzt kann ich gut schlafen 😁

  • @sams5803
    @sams5803 9 месяцев назад +2

    That mag drill is soo compact. Man the ones I've used were 3-4 times the size

  • @daniel635biturbo
    @daniel635biturbo 10 месяцев назад +2

    Fantastic, you always do complicated things with basic tools and very well thought out construction !

  • @drew6761
    @drew6761 10 месяцев назад +6

    Someone get this man a Bridgeport!! Bravo my friend. Great work!

    • @heckyes
      @heckyes 9 месяцев назад

      What is a Bridgeport? I dunno if that's a tool or like a fancy drink?

    • @erik_dk842
      @erik_dk842 9 месяцев назад +1

      @@heckyes A professional milling machine - knee mill

    • @MikeYurbasovich
      @MikeYurbasovich 9 месяцев назад +1

      ​@@heckyesIt's an engineering tool, really. If you have a bridgeport and a lathe, you can build all kinds of machines like I do.

  • @joshuacaylor881
    @joshuacaylor881 9 месяцев назад +2

    Your technique is spot on. Excellent craftsmanship 💯

  • @JohnDoe-rx3vn
    @JohnDoe-rx3vn 10 месяцев назад +1

    I like that you brazed your channel name into the table

  • @ПасенкоФедор
    @ПасенкоФедор 10 месяцев назад +3

    @Factory400
    12 часов назад
    It is this moment where I am most thankful for my CNC milling machine
    Perhaps I am too lazy to be this creative with tools. Amazing outcome with basic tools.
    Bravo.

  • @rickfazzini22
    @rickfazzini22 10 месяцев назад +3

    Awesome bending tool, I fully plan to make one of these! Thanks for sharing

  • @artyfarty87
    @artyfarty87 10 месяцев назад +5

    When he turned it upright & used it as a press break........................I literally can even!!!!
    🤯👌

  • @Lorbuverse
    @Lorbuverse 10 месяцев назад +4

    Don't be sure if i like more the simple design or the functionality. Great project 👍 Just to the right time on a sunday evening a good movie...this is what it takes 😆
    I am excited what's up next 🙌

    • @TheMetalist
      @TheMetalist  10 месяцев назад +1

      Thanks you 😊 nächsten zwei Projekte werden etwas einfacher😅

  • @tedan8116
    @tedan8116 10 месяцев назад +1

    As usual, magnificent job 👏🏼🫡

  • @zachdaniels8112
    @zachdaniels8112 9 месяцев назад +1

    This is legit. Nice job, dude!

  • @SStradivarius
    @SStradivarius 10 месяцев назад +4

    That is so smooth! I like your designs cause they just work so many ways👌🏻
    Metalist you are the beast😎!

  • @chrismayer8990
    @chrismayer8990 10 месяцев назад +3

    Coole Idee. 👍Spiele seit längerem mit dem Gedanken mir eine Zahnstangenpresse zu besorgen. Das scheint ne tolle Alternative zu sein!

    • @TheMetalist
      @TheMetalist  10 месяцев назад +3

      Vielen Dank 😊
      Zeichnungen will ich auf Dienstag fertig haben. Bin gerade noch dabei ein paar sachen zu verbessern 😁 Grüße

  • @GeorgeAlex-j6k
    @GeorgeAlex-j6k 10 месяцев назад +3

    Very well put together.

  • @907jl
    @907jl 10 месяцев назад +7

    Very clever, and well done!

  • @alanmony1582
    @alanmony1582 10 месяцев назад +2

    BRILLIANT as always!!

  • @silvergrizzly316
    @silvergrizzly316 10 месяцев назад +7

    Dirk, there is no stopping you, my friend!!! 🫵r #☝️
    Awesome Invention!!!👌 👏 👍

    • @TheMetalist
      @TheMetalist  10 месяцев назад +1

      Thanks a lot Silver😊

  • @kratanicverses4805
    @kratanicverses4805 10 месяцев назад +3

    Your skills are simply ridiculous. Well done sir.

  • @Justforfun-ek7et
    @Justforfun-ek7et 10 месяцев назад +3

    Always enjoy watching your work!

  • @nahuelramirez3940
    @nahuelramirez3940 10 месяцев назад +3

    GREETINGS FROM ARGENTINA!
    CONGRATULATIONS

  • @EdwardRoss-tb5hz
    @EdwardRoss-tb5hz 10 месяцев назад +3

    Great tool, good job thanks for sharing.

  • @mrMacGoover
    @mrMacGoover 10 месяцев назад +4

    I love that third ✋. 👍😄

  • @matthiaslange392
    @matthiaslange392 10 месяцев назад +3

    Allein die gleit-Führung mit Gewinden drin ist eine super-Idee. Da könnte man mit extrem wenig Aufwand eine Rollen-Biegemaschine draus bauen: 2 Rollen anstelle des "V-Amboss" und eine Rolle statt des beweglichen "Hammers" (keine Ahnung wie ich's ausdrücken soll). Dazu zusätzliche Gewinde in den Grundkörper in der Nähe des Hebels. Da könnte man dann eine Halterung mit Schraube als Press-Spindel befestigen um die bewegliche Rolle Richtung fester Rollen zu drücken.

    • @TheMetalist
      @TheMetalist  10 месяцев назад

      Vielen Dank 😊
      Ja das stimmt dachte mir auch schon sowas bloß die Idee mit dem gewinde die hatte ich noch nicht 😅 aber da kann man so viel verschiedene Matrizen bauen. Vl mach ich noch eine teil zwei für in dem ich mal alle Ideen verwirkliche 😅

  • @Jimmy_McGinty
    @Jimmy_McGinty 10 месяцев назад +5

    Gefällt mir immer wieder sehr gut was du machst.

  • @Vikingwerk
    @Vikingwerk 10 месяцев назад +4

    Almost a sideways arbor press! Neat!

  • @jmckittrick1
    @jmckittrick1 10 месяцев назад +3

    Amazing. As always. Great work

  • @joshtheis69
    @joshtheis69 10 месяцев назад +3

    That was awesome bro
    Way cool

  • @ElleSpirito
    @ElleSpirito 10 месяцев назад +4

    Cool, das schreit eigentlich nach einem käuflichen Bausatz! 😊

  • @cuddlybear4524
    @cuddlybear4524 9 месяцев назад +18

    I don't know why this channel wasn't recommended to me sooner. RUclips owes me an apology.

  • @m.a.jr.689
    @m.a.jr.689 10 месяцев назад +3

    Großartig Maestro 👌👍💪👏👏👏👏

  • @rozeala
    @rozeala 10 месяцев назад +2

    Vraiment top ! bravo et merci ...

  • @peterkohm9742
    @peterkohm9742 9 месяцев назад +2

    Beautiful work

  • @danyecm
    @danyecm 5 месяцев назад

    this guy is a treasure!! amazing job, amazing skills, amazing everything... thanks for sharing and teaching. Saludos desde Mexico mi hermano

  • @drpipe
    @drpipe 10 месяцев назад +2

    Great work as always Dirk... Just a thought you could put a crank handle and 2 fixed bearings to make a radius roller.. I know you have a dedicated Heavy duty one.

    • @TheMetalist
      @TheMetalist  10 месяцев назад

      Thank you 😊
      Yes not the first one who mentioned that

  • @michaelbyrnes7944
    @michaelbyrnes7944 9 месяцев назад +2

    Beautiful love it

  • @Junkboy888
    @Junkboy888 9 месяцев назад +2

    Nice tool great video.

  • @pferdtools
    @pferdtools 10 месяцев назад +3

    Such a cool project, well done! 👏

  • @Sean_y4k2l5
    @Sean_y4k2l5 10 месяцев назад +2

    What a brilliant video! thank you

  • @Gaston12345
    @Gaston12345 10 месяцев назад +6

    Nice tool! Unfortunately I cannot build one myself as I don't own a laser engraver!

  • @Dusto5
    @Dusto5 9 месяцев назад +2

    Awesome and thank you!

  • @alexwbakker
    @alexwbakker 10 месяцев назад +2

    Definitely interested in build plans when this hits etsy.

    • @TheMetalist
      @TheMetalist  10 месяцев назад

      Thank you 😊
      Plans are online

  • @fabientuizat1129
    @fabientuizat1129 10 месяцев назад +3

    merci beau travail !!

  • @renegade1520
    @renegade1520 10 месяцев назад +1

    Pretty slick! Very useful too!

  • @6miler
    @6miler 10 месяцев назад +1

    Nice work! That marking gauge that your using at 8:09, where can i get one?

  • @bryanjones7126
    @bryanjones7126 4 месяца назад

    Outstanding project! Great work and thank you.

  • @retiringrenegade9874
    @retiringrenegade9874 10 месяцев назад +3

    Well done Brother!

  • @mrMacGoover
    @mrMacGoover 10 месяцев назад +2

    You should make a depth set and lock for the handle and three roller wheels and a hand crank for the roller wheel on sliding mechanism
    For rod and flatstock rolling.

    • @TheMetalist
      @TheMetalist  10 месяцев назад

      Thats a nice idea 😉😊

  • @JokerInk-CustomBuilds
    @JokerInk-CustomBuilds 9 месяцев назад +2

    Nicely done!

  • @khaled4282
    @khaled4282 10 месяцев назад +3

    Well done

  • @Lwimmermastermetalart
    @Lwimmermastermetalart 10 месяцев назад +27

    Well done! Especial since you don’t use a milling machine to fabricate. One comment. Use a tapping fluid.

    • @TheMetalist
      @TheMetalist  10 месяцев назад +7

      Thank you 😊 yes i missed it for a couple of sec 😅 but the bit is still good

    • @michaelmetzner3981
      @michaelmetzner3981 10 месяцев назад +3

      Hello Dirk, once again great work, I'm thrilled! Best regards, Michael

    • @TheMetalist
      @TheMetalist  10 месяцев назад +2

      @@michaelmetzner3981 vielen Dank...hab dich nicht vergessen 😉

    • @AndrossUT
      @AndrossUT 10 месяцев назад +3

      The man has to be doing stuff infuriating on purpose. He literally just took a piece off the drop saw and then cut the miter with an angle grinder right after. Sweet Jesus

    • @AndrossUT
      @AndrossUT 10 месяцев назад +2

      Also straight up welding and cutting that tube just to use as a fence...

  • @UNBRIDLEDLivinginCostaRica
    @UNBRIDLEDLivinginCostaRica 5 месяцев назад

    Wow...this is awesome. I would love to build one of these...but gonna have to get some of those great tools in order to do it!

  • @douwetendam5097
    @douwetendam5097 10 месяцев назад +1

    Great build!! Curious to knoe how it would work on thin wall square tubing🤔

  • @jasonw2696
    @jasonw2696 9 месяцев назад +2

    Cool tool!

  • @Ray-gy7tt
    @Ray-gy7tt 9 месяцев назад +2

    Great video, always love watching the work you do. What tool is it that you used to chamfer the edges iv never seen one of those for a die grinder before.

  • @lanzer22
    @lanzer22 9 месяцев назад +2

    I’m very disappointed that Bender from Futurama was not featured anywhere in this video.

    • @pjz7088
      @pjz7088 9 месяцев назад +2

      Definitely needs to slap on a Bender sticker for the next video

    • @TheMetalist
      @TheMetalist  9 месяцев назад

      Yes a bender looks like Bender 😂🫣

  • @cowkllr83
    @cowkllr83 8 месяцев назад

    install roller bearings on the tooling you used to make the hoop and a crank handle, and you could roll steel. awesome stuff sir.

  • @jesusmarte1880
    @jesusmarte1880 10 месяцев назад +3

    Excelente Fabricación de muy alto nivel

  • @pureexpanse
    @pureexpanse 10 месяцев назад +3

    Interesting project.

  • @RayRaysRippin
    @RayRaysRippin 9 месяцев назад +1

    That things legit to have bent that last piece.

  • @firstmkb
    @firstmkb 5 месяцев назад

    I came here after seeing your welding table build and now I want some HAND tools!

  • @__lancaster
    @__lancaster 10 месяцев назад +3

    Outstanding.

  • @cb9custom173
    @cb9custom173 10 месяцев назад +2

    great job

  • @0wl999
    @0wl999 10 месяцев назад +1

    The only flaw i can see, from a engineering/physics standpoint is the c channel arm where you mounted the long handle to, may spread or widen out due to the ' lever effect '.

  • @johndeninger8905
    @johndeninger8905 3 месяца назад +1

    Great video, thanks 👍👍👍

  • @MichaelGraham-i5q
    @MichaelGraham-i5q 10 месяцев назад

    I don't know where to start. I have been a fabricator machinist, tinkerer since a child. Now 64 employed in a job I enjoy going to because of my ability to repair, replace, modify parts and mechanisms to bring the companies vital equipment back to life again.
    At 16 started an apprenticeship in England. Five years later released on the world as a millwright.
    This is the point from which I view this man work.
    Almost made me shed a tear. All that I learned, all that I have to fight against, in comments of "Oh there he goes can't have sharp edge" "you don't have to do all that".
    This incredibly skilled man. Using mostly tools available to all home hobbyists.
    Vindicated that which gives me, my identity.
    Skill, experience, care, no short cuts File it smooth, break that edge, a hole isn't round until it's been chamfered.
    Used to be the norm.
    Trying to pass anything on is a near impossible task.
    Here I saw a man who picked a machine he's been thinking of for a while. Saw mechanisms around him, hmmm! That would work for ?.
    Prepared and set to work producing a thing of both form and function. Paint an option. Sometimes leaving it exposed. Gives it that oily rag clean. That has its own pleasing finish. Damn! I wish that cursing was allowed .
    This punctuation make comments more real.
    Thankyou I'm so f*&cking moved. By your abilities, and commitment to give appearance and ease of function to your work.
    It can still be kept alive.

    • @AndrossUT
      @AndrossUT 10 месяцев назад

      Bro he sized up dimensional holes with a hand drill.

    • @MichaelGraham-i5q
      @MichaelGraham-i5q 10 месяцев назад

      @@AndrossUT Yep! There's that practiced skill. Doesn't just offer the drill to the punch mark. Checks the drill for perpendicular the pushes through.

    • @AndrossUT
      @AndrossUT 10 месяцев назад

      @@MichaelGraham-i5q it's fake

    • @AndrossUT
      @AndrossUT 10 месяцев назад

      @@MichaelGraham-i5q you lose perpendicular when you resize holes with a drill like that. You also lose dimensional circulatory. Why are you trolling?

    • @MichaelGraham-i5q
      @MichaelGraham-i5q 10 месяцев назад

      @@AndrossUT Hey there. I read and gave thought to your reply.
      When drilling and tapping hole the tolerances when understood. It becomes clear that maximum thread / effort in cutting is at 75% thread formation. The closer to 100% thread form you want to achieve the effort required and risk of tap breakage increases that it becomes irrational to attempt this for a minimal ( off hand 10% increase holding).
      Therefore if drilling with a 5/16" Size drill for a 3/8" 16 thread thread is a leaning to slightly larger hole within the
      75% aim.
      If using the power drill .
      Perpendicular eyeballing of the hole to be formed through what appears to be 3/8".
      My conservative estimate of drill length about 4 in.
      This says 3

  • @beastwolf7
    @beastwolf7 10 месяцев назад +3

    This is awesome

  • @glennarnold3970
    @glennarnold3970 10 месяцев назад +1

    mate stella job me being not so energenic would have put a small hydraulic ram on it to save the arms but real good though cheers from down under

  • @quentinhtr4277
    @quentinhtr4277 10 месяцев назад +2

    Hello from France,
    Thank you for all yours video, you are creative and inspiring. What is the screw-tap brand you use with your hand drill ?
    It could be very interresting to show or to put in description all the tools and brand you use set a side yours sponsors.
    Thanks for your videos I reproduced some of your project

    • @TheMetalist
      @TheMetalist  10 месяцев назад +2

      Thank you 😊 the tabs are from ruko. Yes i plan a shop tour 😅

  • @kampfnudel22
    @kampfnudel22 10 месяцев назад +3

    Wie wird der Fräser bei 1:57 bezeichnet? Super Idee mit der Führung! Und hast du einen Link zu dem Fasenfräser bei 2:49?

    • @TheMetalist
      @TheMetalist  10 месяцев назад +2

      de.pferd.com/de/hartmetallfraesstifte-fuer-hochleistung-edge-verrundungsfraesstifte-v-edge
      de.pferd.com/de/hartmetall-kopierfraesstifte-zahnung-4-zylinderform-zya-ohne-stirnverzahnung

  • @Turco949
    @Turco949 3 месяца назад +1

    If nothing else, I'd have given you a thumb up for that hammer alone!

  • @Panzernarium
    @Panzernarium 10 месяцев назад +3

    Nice!

  • @rob-vz4wt
    @rob-vz4wt 2 месяца назад

    Nice! Now it's time to build one that will bend full size sheets of steel!