Fantastic video. I remember asking you in Costa Rica if you made your own builds. They looked so clean, i assumed you had a pro builder making them for you. But, no, you are just a talented builder. Great job!
@@jagdeep5254 You are going to spend over $1000 US dollars to get a setup like this but then once you have goggles and radio your expenses will be reduced to MANY MANY broken parts.
You are the man! Thanks for sharing. Means a lot for the GOAT to share! Really looking forward to your next video about tuning. On racing, I'd love to learn more about your practice routines. Also want to learn how to tackle dive gates from different directions and exit points. Thanks!!
Awesome build video. I'm not sure why but I was almost expecting you to say I'm MinChan and you're gonna learn something today. Thanks for posting this. Many of us got into the hobby because building is almost as satisfying as flying it.
Iam so glad you made this video 👍👍👍. I searched for something like this few days ago, but everything was tutorials how to build beginner FPV drone, not pro racing drone 😁👍.
Soldering the ufl is a cool trick, and only 2 motor screws. Interesting to see which screws he substitutes for aluminum as well, where to sacrifice durability for weight. I trust his decisions, probably gonna try it out on my quads
@ 20:54 you solder the UFL to the board......I never knew that was possible! Great way to secure the connection! Awesome trick! @ 22:08 it looks like VHB tape - not double sided tape but maybe I'm wrong..... @ 22:26 Bro - you should tell the masses that they will short their board out if they don't correctly insulate it before sticking it to the frame.....just saying 😁 Awesome build bro! Loving the purple tape 😎
Great video. Just a recomendation, you should get a fan with some filter to suck the fumes comming out of soder when soldering as most solder is toxic if it comes into your lungs.
Nice video! I have a couple of questions if you have time to answer; 1. What is the weight of this build? 2. Are 2 motor screws enough or is it better to use all four? 3. I see you don’t use any loctite. Any particular reason? BTW I really admire you as a pilot. Not just race quad but helicopters also. I also started as a heli pilot and later moved to quads. I was completely blown away when I saw you flying 3D heli. Just WOW! A lot of talent and A LOT of hard work and practice. Keep on man, you are the best. True inspiration! 👏💪🔥
Five33 should carry this entire build as a DIY MCK Racequad Build and at like a 10% off discount. These xnova motors are not in stock anywhere in usa currently so i went with MCK's V3 2100kv motors for the one im building . Also Five33 should try to get some Dogcom 6s 1160mah lipos back in stock like this year .
Ok, this was super amazing to watch. Just how many of those quads did you already build? That solder-place and your practised hands while soldering tell me... it's a lot :) So glad I finally got to see somebody building that 533 type race quad. Gonna have to build my own now >.
Hey MCK! Could you please tell me where I can find the STL for the turtle fin you're using? It looks like the TPU Stick from the Switchback Classic but I'm not sure.
Hi MCK, what caps are you using? The one mounted on the XT60. And yeah, pointless to say but huge respect for all what you are doing. Best and fastest pilot by far in my books. I think others will agree :)👏🚀🔥
I see one clear difference between his he and I building quads. He doesn't care about how to use a part after this quad. He cuts the wires right in size, soldering ufl antenna and so on. Because he has tons of new parts. He doesn't try to save a part for a future usage, but he saves alot of time. And it's cool when you can do like this. 🎉 But why he didn't cut off the camera control wires same plug - I have no idea 🧐
Fantastic video. I remember asking you in Costa Rica if you made your own builds. They looked so clean, i assumed you had a pro builder making them for you. But, no, you are just a talented builder. Great job!
How much this all together cost excluding goggles and controler
@@jagdeep5254 You are going to spend over $1000 US dollars to get a setup like this but then once you have goggles and radio your expenses will be reduced to MANY MANY broken parts.
I normally don’t watch everybody’s build videos but when I saw the king of racing do one I had to check it out! Clean build!
How much this all together cost excluding goggles and controler
@@jagdeep5254 put the links of everything bro
You're the best in the industry MiCK !!
DON'T LET IT GET TO YOUR HEAD THOUGH !! There's ALWAYS IMPROVEMENTS
You are the man! Thanks for sharing. Means a lot for the GOAT to share! Really looking forward to your next video about tuning.
On racing, I'd love to learn more about your practice routines. Also want to learn how to tackle dive gates from different directions and exit points. Thanks!!
How much this all together cost excluding goggles and controler
I've been waiting for this video for months now!!! Love you MCK. Your a legend
The reason he's so good at racing is this, he did it so easy
Awesome build video. I'm not sure why but I was almost expecting you to say I'm MinChan and you're gonna learn something today. Thanks for posting this. Many of us got into the hobby because building is almost as satisfying as flying it.
Thank you so much for making this video. I can't wait to see your tuning video. I am a huge fan from Puerto Rico, I hope I can meet you one day.
you should do more of these Build Videos MiCK !!
A lot of people want to see you BUILD quadzz
This kind of content will make your channel absolutely explode! Keep it up MCK!
Iam so glad you made this video 👍👍👍. I searched for something like this few days ago, but everything was tutorials how to build beginner FPV drone, not pro racing drone 😁👍.
Finest hands in the hobbysport. Thanks for the peek, MCK!
Finally a build video.. Following you for almost 3 years :)
Awesome man , we love this kind of content from you. Getting to see a more personal side of THE MAN the Mystery , THE MCK! Amazing pilot. Great video!
Wow change of format! Thank you so much for sharing this to everyone, specially noobs like me! :)
You're my hero!
Please make a line of sight video. I saw you flying los in somebody else's video, and it's absolutely amazing!
Making me want to get into racing soooo bad!! Thank you for this video, bro. 🔥
Thank's for sharing. Please make a video show builds for your newers drones. Your builds for racing and that very fast that you publish in the shorts.
I was not intending to watch the whole video but it was so well made that i actually did 😄 Great job mate 👍🏻
Soldering the ufl is a cool trick, and only 2 motor screws. Interesting to see which screws he substitutes for aluminum as well, where to sacrifice durability for weight. I trust his decisions, probably gonna try it out on my quads
Cool Video dude. Great for noobies and loads of useful tips for experienced builders too - like soldering the VTX u.fl antenna. More like this please.
How much this all together cost excluding goggles and controler
What is the reason for soldering the antenna?
so satisfying and clean
@ 20:54 you solder the UFL to the board......I never knew that was possible! Great way to secure the connection! Awesome trick!
@ 22:08 it looks like VHB tape - not double sided tape but maybe I'm wrong.....
@ 22:26 Bro - you should tell the masses that they will short their board out if they don't correctly insulate it before sticking it to the frame.....just saying 😁
Awesome build bro! Loving the purple tape 😎
How much this all together cost excluding goggles and controler
Where do I get that purple tape tho, I need it
Thank you for taking the time to do this! I would your your method in my next build.
Thanks for this finally someone honest and not just trying to push the same products these other pilots are pushing much respect!
i really felt the soldering fumes in my face
MCK ASMR is the best
The Gemfan MCK 51466 V2 props are fantastic! I tried them recently and think they are my new go to prop.
MCK is a drone racing super computer🖤💗
Mck is my favorite pilot 💯🙌
That’s looks like unicorn! Great build video! 😎
Great content dude. Loved it. 🤌🏻🔥
Fast clean soldering. Good technique. Tin, tin bang. Super fast, super clean build. What aren't you good at?
Next video tuning 🙏
I had no idea you could add solder to the vtx u.Fl antenna to keep it from coming off. That's incredibly smart.
How much this all together cost excluding goggles and controler
@@jagdeep5254 about $500
Great video, MCK! Can't wait for all of the follow up videos :)
Loved seeing you way of doing things, thank you
Great video!! Love watching the pros build. Freestyle build next?? Lol
Excellent video. Thank you.
Awesome Build video, what a clean job. Love it. Good Job 👍👊
LEGEND!
Great video. Just a recomendation, you should get a fan with some filter to suck the fumes comming out of soder when soldering as most solder is toxic if it comes into your lungs.
MCK is my favorite Harry Potter
LFG! Just put together a lite a week back :) nice build mck
Great video, thanks for making and uploading!
Great job! Nice to watch your work!
Why don't you use aluminum screws for the top plate?
Great build tutorial brother 👊🏻🤘🏻
you gotta send bardwell some of that purple tape
he's destroying his quads with inefficient orange tape
lol
mck is da king
Clean and fast af boiii😎🙌🙌😎
really good job man, very cool
Nice clean build.
The tuning video will be really cool.
I want to see how pro racer tunes his quad.
How much this all together cost excluding goggles and controler
Nice video! I have a couple of questions if you have time to answer;
1. What is the weight of this build?
2. Are 2 motor screws enough or is it better to use all four?
3. I see you don’t use any loctite. Any particular reason?
BTW I really admire you as a pilot. Not just race quad but helicopters also. I also started as a heli pilot and later moved to quads. I was completely blown away when I saw you flying 3D heli. Just WOW! A lot of talent and A LOT of hard work and practice. Keep on man, you are the best. True inspiration! 👏💪🔥
I would hotglue the UFL connector instead of soldering it and add some hotglue to the soldered wires. But i am not a PRO Racer
It is rocket built by legend ❤❤
Nice! Thank you for this, very useful.
Hi Min Chan, aside from the order able parts, where would I go about getting the 3D printed parts for the camera and antenna units? Thank you
Five33 should carry this entire build as a DIY MCK Racequad Build and at like a 10% off discount. These xnova motors are not in stock anywhere in usa currently so i went with MCK's V3 2100kv motors for the one im building . Also Five33 should try to get some Dogcom 6s 1160mah lipos back in stock like this year .
Watched to the end to see the weight but no luck. What does one of these weigh with props (51466 I presume) and battery strap?
sick build video i hope you will recored more
very nice! would love to see your take on a sub 250 build :)
Ok, this was super amazing to watch. Just how many of those quads did you already build? That solder-place and your practised hands while soldering tell me... it's a lot :)
So glad I finally got to see somebody building that 533 type race quad. Gonna have to build my own now >.
Love this video. Maybe another one line this but you explain your BF settings
Hey MCK! Could you please tell me where I can find the STL for the turtle fin you're using? It looks like the TPU Stick from the Switchback Classic but I'm not sure.
Five33 has everything on thingiverse
Very informative and cool build video. Thanks for sharing. Would appreciate seeing a tune video. 👍🎶🤓
great video i really liked it!!
What is the last 3d printed part that he mounted? Kind of like a horn.
Could you do a video of you flying that Align Quad behind you?
how do you wire up the warp drive?
Please do more video like this!!!!
Waw your english is so good!!
우와 멋짐 멋짐 !! 👍 👍 👍
Can you please show us how you tune your esc for Freedom spec and for 6S. I will appreciate if you can make a Beta flight diff for us.
is this the velocidrone five 33 switch back build?
How many quads du you take to your tournaments?
What batteries do you use? Does anyone know? I'm about to buy new batteries 🥺
Noice! I think the four longer screws are supposed to go through the arms, though 😉
No, they are meant for standoffs
Hi MCK, what caps are you using? The one mounted on the XT60.
And yeah, pointless to say but huge respect for all what you are doing. Best and fastest pilot by far in my books. I think others will agree :)👏🚀🔥
Thanks for sharing very cool
We want’s more vidéo like this, great job, what is your rates ?
What Battery strap do you use for the switchback? And can you make a video on your velocidrone settings and how you practice in it.
What is the spike on the top for?
How much does it weight like this without props and battery`?
super cool!!!!!!!!!!!!!!!!!!!!!!!!!
What about Betaflight?
Started from the bottom now we jeeee
awesome video yea do a vide when you tune quad
Tuning please 🥺
I half expected this video to be the world record fastest 533 build... Maybe next time?
how much does this build cost?
the ESC you linked is a newer SKU capable of 128khz operation. Is that important? Do you use it? or is the older 98khz versions fine?
U r awesome man
I see one clear difference between his he and I building quads. He doesn't care about how to use a part after this quad. He cuts the wires right in size, soldering ufl antenna and so on. Because he has tons of new parts. He doesn't try to save a part for a future usage, but he saves alot of time. And it's cool when you can do like this. 🎉
But why he didn't cut off the camera control wires same plug - I have no idea 🧐
Weight it man and front left motor bearings sounds rough .
will you start flying fatshark hd or do you like to fly analog this year?
Are these new 2050kv motors better than your v3 2100kv motors?
lets see the perfect HDZero build :)
what is that muddy paste he dip his solder iron to?
solder flux maybe?