Horizon Hobby's BEST RC Jet Getting Wrung Out
HTML-код
- Опубликовано: 23 июл 2024
- Want your own E-flite Viper 90? Pick it up via bit.ly/3JGRS30 to help support the channel at no cost to you.
Be sure to check out Hangar 18 Hobbies on social media - and please consider ordering from them now that their website is live! They're a growing local hobby shop and I'm proud to be their demo pilot.
www.hangar18hobbies.com
/ hangar18hobbies
/ hangar18hobbies
/ hangar18hobbies
🙋♂️ --------------------------------------------- Social ---------------------------------------------- 🙋♂️
If you could, too, consider following me on social as well:
⌛ Tiktok: / jonsynrc
📷 Instagram: / 5ynaesthesia
📷🙋♂️: @EscapeLifesGravity
📦 -------------------------------------- Things I Fly --------------------------------------------- 📦
Receivers:
Spektrum AR8360T Receiver: tinyurl.com/SpektrumAR8360T
Transmitter:
tinyurl.com/IX20Transmitter
Servos:
tinyurl.com/B13DLM
Batteries:
4000 6s Smart 50c Packs: tinyurl.com/Smart6s4000-50c
6000 6s Zeee 100c Packs: tinyurl.com/6sZeee6000-100C
5200 6s Zeee 100c Packs: tinyurl.com/6sZeee5200-100c
5200 6s Zeee 50c Packs: tinyurl.com/6sZeee5200-50c
Thanks for watching guys. See you again soon.
Music: Swish by Patricia Taxxon from the album Aeroplane: • Patricia Taxxon - Aero...
#radiocontrol #flight #rcplane
eflite, horizon hobby products, e-flite, eflite viper 90mm, e-flite viper 90mm, edf jet, 90mm edf, sport jet, radio control, remote control, rc plane, rc airplane, smart jet, ix20se, ix20, spektrum, smart plane, smart esc, avian esc, reverse thrust, high alpha, rolling harrier Horizon Hobby's BEST RC PLANE Getting Put Through Its Paces (E-flite Viper 90mm)
0:00 Introduction \ Preflight
2:00 Takeoff \ Vertical \ Triple Roll
2:50 Knife Edge Tumble \ Vertical Tumble \ Inverted
3:23 Outside Loop \ Vertical Tumble \ Inverted Gear Pass
3:49 Outside Half Loop \ Slow Pass \ Full Speed Tumble
4:50 High Alpha Pass \ Knife Edge Tumble
5:50 Dirty Inverted Passes \ Aborted Rolling Harrier
6:57 Wind Shear \ Aborted Landing
7:30 Landing \ Thrust Reverse \ Turbulence Discussion
8:28 Preflight \ Takeoff \ Inverted
9:18 Inverted Reversed Roll \ Chandelle \ Tumble
9:50 Reversed Roll \ Knife Edge Tumble \ Half Loop
10:24 Knife Edge \ Tumble \ Snap Roll \ High Speed Pass
10:58 High Speed Tumble \ Stall Roll \ Poptop
11:31 360 Poptop \ Rolling Harrier Attempt \ Rolling Harrier
12:40 Inverted Dirty Pass
13:13 Close Dirty Pass
13:42 Crow Landing \ Reverse Thrust \ Post-flight
14:16 Preflight \ Takeoff
15:00 Getting Over Anxiety with Low Level Knife Edge
16:06 Tail Slide \ Half Loop \ Low Inverted Pass
16:45 Aborted KE Pass \ Long KE Pass
17:22 High-G Half Loop \ Vertical Tumble
17:46 Super Long KE Pass \ Reverse Roll \ High Speed KE Pass
18:18 Super Tumble \ Inverted Flat Spin \ Tumble
19:14 KE Pass \ Vertical Tumble
19:45 Chasing Perfection \ Aborted Landing
20:25 Wind Shear Landing \ Post-flight - Развлечения
Awesome flying like always. Thanks Jon
This Jet looks so cool!! Damn
And it's so much fun to fly!
Great video work, such a beautiful flight!
Hi Jon! I recently subscribed to your channel and I really enjoy your content! I think it is great that you rotate through the aircraft in your hanger so you aren’t flying the same thing. You really make it look easy, you are a great pilot! Also wanted to say thanks to your camera guy, great job!
Hey man, much appreciated. Thank you so much.
Hello Jon, Thank you so much for making a very informative flying video's. 👍👍
Thanks man!
excellent video! thank you!
GREAT show, bro! Master at the controls! Loved the “pop top”.👍🏻👍🏻👍🏻
Thanks Randy, much obliged!
Had to come back for the 👍 Great show man!
Thanks so much for sticking around!
Very impressive team
I recieved my original, (3rd bought plane since getting back flying just b4 covid hit), ultimate 3d back a week ago. Maiden'd it Friday. Wrung it out 3rd pack. I missed THAT plane! It was what i re-learned to 3d on. Buddy (brother from another mother) that gave it back said, i make it do what its supposed to do! 😜😁
Id forgotten how much fun IT was to fly! 👍
If (WHEN!!!), I get my 1st (true) jet, think ill go with the FMS Rafael. Ive seen 3d pilots do what i wanna do with a jet, on this 1. ONLY thing stopping me, is the UNmanicured grass field WE fly on.
At some point you've gotta move past grass fields if you can. Jets don't really hold up to grass over time. The gear will eventually tear out unless it's glued in really well - which, if Freewing did it, is probably not the case.
Btw your awesome pilot
appreciate your feedback. These vioer 90’s getting back into RC. Is you Spektrum 20 the one to get? Needing to buy all at once. Thx.
We love our IX20SE. If you want one, consider picking it up via bit.ly/3BI3eBD which is a huge help to the channel!
Hi Jon, I have a question , were did you plug the LED's in (RECIVER) not exactly Wich channel?
The Freewing blue box is attached to the bind port, and the wing lights are run on the gear servo power.
@@TwoBrosRC ok thanks 👍
Which of the non delta planes do you recon is the best ultra high alpha performer?! I use similar mixes as you do, but never thought about taking it that far as you do. Need to try it. Flying turbine in the same foamies I don't have any torque issues along with a lighter wingloading :) I remember the Yak 130 90mm could do sort of delta like slow flying
Horizon doesn't really have any other jets besides the Viper 70, Viper 90, and F-16 70/80. All of them are capable of high alpha except for the Viper 70.
nice video about this amazing viper; it is good you have changed the lights ( white strobes on the top); do you have the reference of the strobe and the led lights controler? thanks
It's the MotionRC blue box, you can find it on their site. Thanks!
@@TwoBrosRC ok thanks
Great flying, thank you.
Have you ever flown the freewing avanti 80mm that you could give a comparison? Seems like I hear different flyers say this is the best flier and others say the avanti is the best.
I have them both and I always take the Viper to the field but the Avanti is always my standby jet to take.
I haven't yet. Honestly, I don't like how it looks. That alone has kept me from considering a purchase. I don't want to spend $300 on something I don't like the looks of, you know? I may do it if there's enough interest though, just for you guys.
I totally understand that.
U should add a thrust vector nozzle to get even more out of it
That would require extensive mods that I'm not really prepared to do to the model. Not even sure there's a TV system that would work with this jet.
Hi Jon, your videos are so informative and helpful so please do keep making them. Your piloting skills are exemplary, you are handling very tough conditions and still making things look quite smooth, well done.
Thanks Gary! I have no intention of quitting the hobby anytime soon. There's far too much to do, see, and experience. Appreciate you watching!
Man awsum again
Nice camera work
Thank you so much 😀
About the 5:35 mark looks like something comes off the plane?
It's a jet flying overhead in the distance.
I’d love to see you repair your aircraft the next time you need to. I’m not seeing many good quality videos of foam filler use on RUclips
I'm not sure I'm using it as well as I could be, but I'll try to remember. Maybe make it into a live stream.
Man I get cocky my plane in tree lol so sweet
Are you flying with AS3X on or off?
On. Why?
Only have nx8 can I do most what I want ?
Yeah, most of it.
How much % is the approximated value you use or a range from 0 to 150% generally on your Crow mix on your planes on Ails. and Flaps? And do you mix elevator in crow? A recommended FULL span.
And can you bottom Ails. Up? Or you need some play?
ruclips.net/video/uUOJhLrSibw/видео.html is my setup - all the info is in there. I don't recommend full span flaps, but I could put some testing in on it for people if there's interest.
Not sure what you mean about "can you bottom Ails. Up?"
@@TwoBrosRC full spoilers travel on the ailerons for airbrake and crow i mean, or do you need some play for it to turn. I mean can you use them at full deflection for spoiler type pourposes?
@@alejo0488 They move up fully but there's an aileron mix to allow them to move down for rolling.
@@TwoBrosRC top them up jajaja 👍🏼; So I can top them up and still have good roll authority with only one rolling it to land? That’s what i understood!
Also I’m talking from an Arrows BigFoot but i didn’t wanna bring it to the question because i wanted a general recommendation. Thanks man, i appreciate it! 🇨🇴
I was recently told this was a good beginner jet. 2 yrs under my belt yea or nea
Definitely not, it's way too expensive to be a beginner airframe.
And do you have any clue what airfoil this plane has?
It looks symmetrical to me, or very close to it.
@@TwoBrosRC thanks again👍,
It's not symmetrical, more curved on the top than the bottom.. Looks something like a NACA 2412 1933... Not as thin, fast and efficient as the wing on the tomahawk design 70mm Viperjet. Works well though.
@@Natesh-Shankaraanand thanks buddy 👍👍
Great video but camera to close need depth precision also want to c from bird's eye view