The person who marked the size of this I need to get hit After purchasing it, I found out why you guys use a pistol grip without a guard on the back. And after purchasing it, I learned why there was no video of the takedown. I had to re-machine all the holes and do not recommend using Magpul grips. And there is no pin to press the buffer lock. Find a suitable stainless steel 2.5mm pin and process it to 7mm. The material is hard. There are some areas where hard anodizing is weak. Again, the holes using the pins are not standard at all and the stock rod is thicker than the real thing.
Please make VFC Receiver Version 3!
Please do this for vfc m4 gbbrs
Ra Tech already has that, but unfortunately they are all sold out.
Please make a SR16 Receiver!
Do you plan m16a1 Receiver ？
Same, looking for one, there are only viper and marui if you want a better quality m16a1 receicer
The person who marked the size of this
I need to get hit
After purchasing it, I found out why you guys use a pistol grip without a guard on the back.
And after purchasing it, I learned why there was no video of the takedown.
I had to re-machine all the holes and do not recommend using Magpul grips.
And there is no pin to press the buffer lock.
Find a suitable stainless steel 2.5mm pin and process it to 7mm. The material is hard.
There are some areas where hard anodizing is weak. Again, the holes using the pins are not standard at all and the stock rod is thicker than the real thing.
Yeh absolute shit nothing fits properly not acceptable for a £400 receiver set