@@khalidmahmood2373 You still have to pack the bearings. On top of that, they didn't even wipe the shaft as they drive the bearings in. Its all scored up. A really sloppy job by the people in the end. .
Yup, that's the extended life model, "100% more mileage than our standard life one, guaranteed" The standard gutter warranty, "once she's over the curb....you gotter". I believe as well, they used Doublemint instead of Juicy Fruit for the weld as it appears a bit...ahhhhh...lumpier. Also used was 5lb precision bearings rather than the usual 10lb maul fit. And all torqued up with a 2-1/2 lb maul...precision work.
Funny how people can’t realize that what they think is so bad and scary is 100% normal for you guy’s. Think back 40+ years we where no different. I think these folks do a hell of a job with what they’re given and love it by the looks of it .👍👍👍👍👍👍
I Also Didnt See The Hub Nut Tightened Up With A Hammer And Drift/Chisel , Seriously They Can Make Those Axles But They Can Make A Socket Or Spanner To Tighten The Hub Nut, Thats Just Wrong .
Pound that hub in a pipe and don’t know if it’s straight with the other end? You need this perfect or the tires will wear prematurely. Gee! I don’t care apparently.
One thing is there is not nearly enough grease in the bearings. You need to pack the bearings with grease not just wipe it on them. Then you have the nut that is Rusty. You could at least took a grinder to clear off a lot of that rust and then used a wire wheel to finish it off. I am not sure of what the load will be on that axle but if it's on a tricycle it will probably be all right but I've noticed a lot of things in that side of the world as far as trucks they are way overloaded and that is the reason the places exist to keep fixing all of the broken axle shafts and other axle related parts and front end parts. You would not be able to get away with loading your vehicle down as much as happens in India, Afghanistan and other parts of the Middle East in the western world. Overloading your vehicle not only damages your vehicle but your roads.
Епанутся плюс минус пару мм. Как так можно делать? И они же хвастаются ставят видео на обзор что мол они такие супер умельцы. А за проделанную работу там надо руки ломать. Неандертальцы
Why does he simply throw this piece of metal on the ground after drilling? I've seen that a lot now, they throw everything away when they're done, regardless of whether it's a tool or not a part they just made all on the floor, then they just spit everywhere like pigs no respect for nothing that's why everything is so dirty there would never go there really never
Wow machined parts just chuck em on ground spindles look like he'll after welding the inner bearings are supposed to come off with the hub and sledgehammer for everything and no grease on bearings or oil in hubs which ever it is unreal
Is that a joke, this bad work should also be paid oh god. This country is so dirty everything on the floor everything is broken the people have no respect.
the lathe operator did an excellent job machined the shaft made the thread there the welder welded the shaft on the tube there at the end the citizen who says he is a mechanic puts the sledgehammer in the bearings because he didn't use sandpaper to remove weld slag on the shaft puts the cube on the earth floor assemble the bearings with the cube full of earth without grease and place the dirty cover without gasket or glue poor quality service
What? No grease on the bearings? And, he picked up the bearings off the dirt floor and installed them? You would think they could sweep the floors every now and then!
![Jack Harlow - Hello Miss Johnson [Official Music Video]](http://i.ytimg.com/vi/Q86_nlRoIGw/mqdefault.jpg)
Love how they install bearings by pounding them over the top of the welding spatter. Going to be great fun changing those out.
Молодой токарь явно везунчик - до сих пор с глазами, даже двумя.
Good job!
Now this axle is ready for next 10 miles before breaking down.
Who needs grease when you have dirt as the lubricant.
@@ahndeuxyou see last his work? He fitted a green color cup for lubricant.
@@ahndeuxwhen this exle will be fit in wheecle then man fil the grees in that cup. no need 10 thousend miles
@@khalidmahmood2373 You still have to pack the bearings. On top of that, they didn't even wipe the shaft as they drive the bearings in. Its all scored up. A really sloppy job by the people in the end. .
Yup, that's the extended life model, "100% more mileage than our standard life one, guaranteed" The standard gutter warranty, "once she's over the curb....you gotter". I believe as well, they used Doublemint instead of Juicy Fruit for the weld as it appears a bit...ahhhhh...lumpier. Also used was 5lb precision bearings rather than the usual 10lb maul fit. And all torqued up with a 2-1/2 lb maul...precision work.
Я так понимаю, уровень технологии начало 20 века. Сурово.
Maybe pack some grease in the bearings and keep them out of the dirt a good idea. I suppose the axle will work for long enough to get the job done.
Хороший ролик! Надо показывать тем, кто просит сделать подешевле.
У нас это будет еще дороже.
This exel is very cheep in pakistan. That peopel are not digree holder in this work butt very inteligent.
Funny how people can’t realize that what they think is so bad and scary is 100% normal for you guy’s. Think back 40+ years we where no different. I think these folks do a hell of a job with what they’re given and love it by the looks of it .👍👍👍👍👍👍
but they are paid peanut prices 😢😢😢😢
это где так у нас работали??? чтобы уж так совсем......
I go back 40yrs and i never remember working on a dirt floor
Как вы определяете биение детали!?) На глаз! На какой? На шоколадный😂
Amazing guys able to create what they can with limited resorces. Massive thumbs up from me.
Precision made.. hammer fitted😮
О блин, виден небольшой прогресс, сварщик варит в щитке и рукавицах
Good luck
Tapered roller bearings love a bit of dirt in them when new.
Rule number1, "everything we make we must chuck it in the dirt"
Как этот токарь и дожил то до своих лет, если он так с напильником лезет через крутящийся патрон к детали? Видимо, бессмертный!
Он знает этот станок как свои три пальца.
Я так и думал - сейчас намотает.
И показали как делать,но не рассказали почему надо именно так,и традиции очень сильны в таких обществах
Наши технологические парнеры))))))
La berraquera de Melgar tol los felicito
Nice❤
Excellent job 👍
It's always amazing to watch these guys accomplish so much with so little~!! But tell me I didn't see these huge bearings put on the axels DRY~!!!
@Rick don't forget the welding dingle berries.
I Also Didnt See The Hub Nut Tightened Up With A Hammer And Drift/Chisel , Seriously They Can Make Those Axles But They Can Make A Socket Or Spanner To Tighten The Hub Nut, Thats Just Wrong .
Primeira vez q vejo alguem dessa galera ai usar proteçao corporal p soldar.
Too bad you don't use eye protection both on the milling machine and with welding equipment
My cousin who works in a factory in Karachi told me that they always get hurt from the particles of lathe machine
What milling machine? Only saw lathes and drills.
@@codprawn I was wrong.
His guide dog said he don't need eye protection anymore.
@@horstmuller7512 I wonder if he himself can't think that if he becomes disabled he will no longer be able to do his job and feed his family
Otimo video. Excelente apresentação do que não pode ser feito tanto em segurança pessoal quanto de maquinario.😮
@@camposcasc7615 Thanks for watching 🙌
Pound that hub in a pipe and don’t know if it’s straight with the other end? You need this perfect or the tires will wear prematurely. Gee! I don’t care apparently.
wooooaaahh !!!!!!😳😲😲😲😲😲
Nice fit on thst nut by the look of it. It would take me 10x longer and I have far more equipment and ppe 😂
Very good
Genial...!!...muy rápido...Saludosss amigos......!!!
The Mechanical Symphony: A Visual Extravaganza" By Wow Mechanics
I dream it. Great guys
I wonder that the maschinist still has his left arm !
The bearings are dry no grease!
Es mejor!!!
at least less dust sticks to the pieces when they drop them on the dirt floor.
19:20 ролики смазаны. да и это низкоскоростной транспорт, это видно по сальникам.
You see when fited last green cup? when thay fit in wheecle then thay fil grees in that cup ..
Good job
Да, итальянцы молодцы конечно
Точно, не то что эти французы из Австралии )
That poor chuck :)
One thing is there is not nearly enough grease in the bearings. You need to pack the bearings with grease not just wipe it on them. Then you have the nut that is Rusty. You could at least took a grinder to clear off a lot of that rust and then used a wire wheel to finish it off. I am not sure of what the load will be on that axle but if it's on a tricycle it will probably be all right but I've noticed a lot of things in that side of the world as far as trucks they are way overloaded and that is the reason the places exist to keep fixing all of the broken axle shafts and other axle related parts and front end parts. You would not be able to get away with loading your vehicle down as much as happens in India, Afghanistan and other parts of the Middle East in the western world. Overloading your vehicle not only damages your vehicle but your roads.
Kaliayan sangad anjay
If you like dirt and no grease in your bearings, the "Nissan Diesel" shafts is what you buy.
Welcome to Dirt Floor Machine Shop. Please leave all safety equipment at home....
Ступицу с земли поднял и сразу на цапфу напялил... зачем смывать песок?
Так там и резьба ужасная
Песок это фиксатор резьбы. Всё вам объяснять. 🧐
А то что после сварки набили подшипники не почистив с кучей мусора не смущает))))
@@alegator да там перечислять замучвешься, я думал все поймут, но оказывается есть те кому все надо перчислить...
Епанутся плюс минус пару мм. Как так можно делать? И они же хвастаются ставят видео на обзор что мол они такие супер умельцы. А за проделанную работу там надо руки ломать. Неандертальцы
one problem no grease on the bearings when installed it wont last long
👍👍
👍👍👍!!!
Тойоты так же изготавливают.
주어진 현실에서 최선을 다하는 모습이 보기 좋습니다. 안전에도 신경쓰세요. 어느 나라인가요? 👍👍
Thay belong from pakistan. City name Gujranwala. Thay peopel are very inteligent
The great Pakistanese..
Интересно, сколько токарей размотал этот станок?
Manufacturers warranty --- 30 minutes or 30 miles, whichever comes first
👍👍💪💪
Why does he simply throw this piece of metal on the ground after drilling? I've seen that a lot now, they throw everything away when they're done, regardless of whether it's a tool or not a part they just made all on the floor, then they just spit everywhere like pigs no respect for nothing that's why everything is so dirty there would never go there really never
Good
"How much pre-load on these bearings guv? "..... "yeah, give it some..."
Was that song lil flip "i shoulda listned
Сделайте токарю автоматическую подачу
We LOVE MUSLIM BROTHERS.
👍
Интересно, какие биения вала получаются? Там же дикая несоосность
на тех дисках что они сами изготавливают из старых тоже несоосность. Подберут положение в котором они скомпенсируются
Gia công kiểu này độ sai số rất cao
Can you tel me error?
👍👍👍👍👍
willingness to work and diligence - it's good!
But cleanliness in the workshops would not hurt you!
Unfortunately they can't afford it
It's just a mirror of the quality of their work.
It's all worthless junk.
They're filthy people...at work and at home
SUPER Slovakia ,,,,,,,,,,,,🛠🛠🛠🛠
This is Pakistan
Wow machined parts just chuck em on ground spindles look like he'll after welding the inner bearings are supposed to come off with the hub and sledgehammer for everything and no grease on bearings or oil in hubs which ever it is unreal
Has anyone noticed that overseas no one uses emery cloth to polish a shaft is it too expensive or do they not have it there ?
Автор данного видео ну хоть ты подскажи этим людям очки нужно одевать и шпиндель руками не останавливать
очки нужно НАдевать.
How can you work in such a mess
Van norman
Я так понял что это на какую то шайтан - арбу , нет креплений для тормозного шита ибо трусов в Пакистане нет .
Yes you ate right. This exel for small loader . Loader speed will be 50 to 70 km phr
Тормоза придумали трусишки.
São muito bons e usam causas do Brasil 😅😊
Sorte pra quem comprou essa peça 😊😊😊😊
Is that a joke, this bad work should also be paid oh god. This country is so dirty everything on the floor everything is broken the people have no respect.
For some reason the finished product doesn't look like the thumbnail...😂
the lathe operator did an excellent job machined the shaft made the thread there the welder welded the shaft on the tube there at the end the citizen who says he is a mechanic puts the sledgehammer in the bearings because he didn't use sandpaper to remove weld slag on the shaft puts the cube on the earth floor assemble the bearings with the cube full of earth without grease and place the dirty cover without gasket or glue poor quality service
What? No grease on the bearings? And, he picked up the bearings off the dirt floor and installed them? You would think they could sweep the floors every now and then!
For grees he fited the last green cup. That cup for grees. When thay will be fit in wheacel then thay fil that cup with grees ..
Definitivamente NO ES "TORNERO" yo lo saco del taller MÁS RÁPIDO QUE VOLANDO...
а сальники и пыльники на ступицах не нужны разве?
Hello sir
It's too bad not using micrometer
Hollow axle😶
A new axis is built out of nothing, very impressive. What I like most is that all the safety regulations are being followed.
واش من بلاد باكستان. او الهند
I'm a machinist cnc and no safety goggles 😊
Goes right along with the steel toe sandals.
Location and number
Not how you install seals and bearings .
سلام عليكم جناب کدھر ہے یہ خرادیہ مجھے تین ایکسل چاہیے مل سکتی ہے
А тормоза где
DESIREE DE LOS SANTOS MATO
Who cares about weld spatter?
О т.б. даже не слышали.
No safety At all.
👎👎👎👎👎👎👎👎👎👎
Унас такара дрочит тока умейить!!!
SAF or BPW ????
😂 Indian
Pakistan
KOSMIC TEKHNOLOGY.
👍👍👍👍💪💪
DESIREE DE LOS SANTOS MATO
DESIREE DE LOS SANTOS MATO