AWESOME DIY SPEAKER | Completion(verneering)
HTML-код
- Опубликовано: 29 сен 2024
- Hi guys! in this video , i'd like to show you how to apply verneer
this is very frist time i have work with verneer, and i like to share my experiment to you
I like to get all your comments on my work no matter positve or negative, let's me know what's do you think
New project: DIY SPEAKER | DIY subwoofer
ruclips.net/video/38DDvD3HG88/видео.html
Hope you all enjoyed my video! thanks for watching!
How did you do the calculations for the transmission line lenght and volume?
Looks beautiful but why didn't you veneer the port also
or painted it some color
Speakers are nice,amp is shit
Все вроде хорошо, но не 3 части. Тут "воды" много. все в одну часть можно было впихнуть спокойно.
thanks for watching my friend!
You could throw easily a subwoofer in the amplifier box...
thanks for watching my friend!
Absolutely amazing, Thank you for share your amazing job. I want to build one
thanks for watching my friend!
I would have left as natural wood and stain it. it would have looked more elegant
i realy think youdid a very nice job my friend. The speakers looks great and you you have a ton of skills. Only one question. You bild the amplifer in that littele box. Looks very good, but what about the ventilation. You build up much heat in that box and it is closed from top to bottem. Better to make some ventilation next time to reduse that amount of heat. Your equipment will last longer. I did subscripe your channel and wising you all the best. Hope to see more of your videos. Greetings from the Netherlands. Sincerly , Bert de Vries. Computer maintenance Hillegom.
Class D amplifier not produce much heat as class A or AB so no need venttilation i thought , thanks alot for your nicely comment my friend!
Beautiful design and sound !
Congratulations for your wonderful work !
thanks for your compliment my friend!
It was an amaing series!
I just think you could put a crossover to protect the tweetet and have a more balanced sound.
thanks for watching my friend!
nice video sir thank u
i am India
Boi where is sound test 😭
The tweeters are not in the same place!
sorry but, what do you use for veneer, like glue?
i used titebond wood glue, thanks!
Bose speakers 🤔
đẹp lắm bạn , bạn cho mình hỏi cái vân gỗ dán kia ra ngoài mua thì gọi là gì bạn nhỉ, cám ơn bạn
mình mua verneer này trên Lạc Long Quân HCM, bạn nói mua verneer sồi thị hõ sẽ bán cho, thanks bạn quan tâm
Awesome
Congratulations to this beautiful work.
I´ld like to build one like yours.
I´m brasilian and I ´ve been the same computer program Mach3 CNC Controller.
Can you provide me the computer design in this program ?
My fried, here you are :drive.google.com/open?id=1eWeonjf5irSKarXKnJAyOhDw3SJNdW4O
Thanks for watching
한국에서도 당신을 응원 합니다
멋진 작품 감사합니다.
I support you in South Korea
Thank you for the wonderful work.
you're very welcome my friend!
Great video! Congratulations
thanks for comments my friend!
Well done.
thanks for watching my friend!
Gracias por compartir tanta genialidad!!! Excelente trabajo!!!... Saludos desde Argentina.
you're very welcome, thanks for watching my friend!
👏🏻👏🏻👏🏻👏🏻👍👍
, you should have used a steamer for that bend
i just heat it up for that bend, Thanks you Tim!
I,d of used contact cement to veneer.
great! thanks for watching friend
Amazing job!! Where are you located?
i'm in VietNam, thanks for watching my friend!
Wow very amazing work! Hope you receive all the success you're worthy to receive my good man! Vietnam will definitely benefit having you. Keep it up!
i'm really appreciate all your comments my friend, thanks a lot!
Nice!!
very nice
thanks for watching my friend!
Nice done!
you're very welcome friend!
, nice job but I like a more cherry finish with burndt wood underneath the final stain or sealer
nice to hear you back friend, thanks a lot for your recommend!
Solidworks master , you do very very nice work.
I would actually buy a set of those but built to my preference of course.
my wish list for a 2.1 setup for my desk top is.............
finish, burnt wood W/cherry stain over the top like Toteum speakers....
3 1/2 inch T-Line speakers
( full range point source
bamboo) from Dayton Audio, and a 10 or 12 inch subwoofer with a Dayton 300 watt plate amp.
I just don't have the time to build. I have the knowledge but no time working too much to pay bills. yuuuk !!!!!!
take care & build on my friend.
that's a great build if you really do it, i'm watching worldcup 2018 and replying your comment, hope you process to build your speaker soon my friend!
Solidworks master yea me too. I've been wanting to use the new Dayton "full range" speakers for a while now and I am even considering using that idea to build a super T-Line ( so to speak ) with 4 / 8 inch bamboo full range driver's wired to fire "off" at same time, ( in phase) @ 16 ohms to reduce it down to a 4 ohms load.
I really think they would be incredible sounding as long as I do the math and get the dual Chambers right and ports. once I figure that out and hook those up to my Fluance turntable and "cubetube-7" tube amp with the upgraded ( Mullard ) amp tubes, OH BOYEE !!!!!!!
Straight sound with NO CROSSOVER'S OR PHASE ISSUES and that warm punchy bass from tubes.
absolute HEAVEN.
my 2 cents, dayton full range also is the best choice for T-line type, phase issues only occur in multi-way system. maybe ,i will try with dayton driver in some next project, love the way you sharing ideas
Tanta madera para tansolo una bocinita de 4pulgadas jajaja noma siquiera uviera sido almenos de 6 pulgadas
thanks for watching friend!
thanks for watching friend!
@scklay hola
Yo quiero aprender. Me parece interesante el laberinto, es solo para los bajos? Estoy por hacerme un bluetooth speaker pero algo que sea bueno y para mi hogar. Quiero que suene de la mejor manera. Me ayuda? Gracias
muchas gracias por la recomendación, me gustó ese video. muy interesante, mi nueva pregunta, puedo poner un crossover en la tarjeta TDA7492? quisiera saber que necesito? gracias.
nice but large....... make your videos shorter
thanks for watching my friend!
ruclips.net/video/i4dPWIhFxTo/видео.html 😉