Replacing Main Jet on a Vm22 26mm Carb
HTML-код
- Опубликовано: 22 сен 2023
- Motorcycle is a Boom Vader 125 (Grom clone)
Needle position In the 1 position
Stock main jet-95
New main jet-105
Parts used:
25PCS Carburetor Main jet kit Compatible with Mikuni VM22 VM24 125/150/200/250/Dirt Pit Bike ATV
VM22 26mm Carburetor for Mikuni Intake Pipe Pit Dirt Bike 110cc 125cc 140cc Lifan YX Zongshen Pit Dirt Bike -VM22 26mm Carburetor 
Авто/Мото
![Moneybagg Yo - WHISKEY WHISKEY [feat. Morgan Wallen] (Official Audio)](http://i.ytimg.com/vi/kJamyq0WplE/mqdefault.jpg)
I was just changing the main jet but the whole piece came out including a part that was up in there I’m not sure which way it goes don’t want put it wrong way n messes up my performance
Does it look like the piece at 1:16 of the video, if so use the method in the video on how I took off the main jet, which is just a small piece that has a flat head slot that screws on to the piece on the wrench I’m holding
I've been looking for this video for 2 mos.
I changed my jettings to 38 115 5..
Whenever I'try to do 1/4 throttle my just like what you did earlier in the video, it's loosing power.. Can you recommend some jettings please..
Hey how you doing man, so with the main jet I went with a 105 main jet I think the stock jetting that comes with these is a 98, and kept the pilot jet stock. But not every mikuni carb is the same so just go up in size little by little and go for a test ride each time and feel the difference. Also don’t forget to check your needle position. I have a video on that too. It plays a part aswell
Hey man I’ve been watching your videos since i got my bike. What main jet did you end up with? I cant seem to get the bike to stop bogging when i snap the throttle.
I went with a 105 main jet I kept the pilot jet stock.
I think stock size is 98 but my advice is I would go up a size little by little for example 98 then 100 and if that doesn’t work 105 and so on. But also check the needle pin for the carb I can do a video on that if you want
Where you located fam I can help you out
Ive been using a nibbi pe24 carb. Im located in the bay area. I just ordered the same carb you installed and it should be here later today. Were you able to get yours to not die out when you snap the throttle all the way fast?
@@carlossd27 yup. As soon as I changed the main jet it didn’t bog in full throttle. It was acting the way it should when you add more gas.( go faster) you can also try changing the needle 🪡 position. I can definitely help you out bro
My jet is not coming out
It should come off pretty easy it’s just a screw with a hole pretty much