2008 Chevy Malibu Lock/Unlock Fix
HTML-код
- Опубликовано: 14 окт 2024
- On this vehicle the Lock/Unlock buttons were not operational. I was able to verify through my scan tool(via bcm communication) that power was getting to the lock actuators and that it was just the button themselves that were not working. Side note i was also able to fix key fob and through some research saw that cleaning the contact points plus the button themselves with some isopropyl alcohol and a q tip is the way to go.
Show us how you removed the door components to access the door locks.
Thanks man really didn’t want to break the bank if I didn’t have to mine started locking and unlocking on it’s on after it was raining and now I know why
great video thank you
Great video! How do you remove the switch to clean it? I have the panel removed and the connector disconnected for the door lock switch
Man, That is a nice, big garage!!!! Man, what I'd give for that garage!!!! I am glad that you showed the inside of the switch/ the cause of the issue!
Great, explanation mine both lock and unlock buttons were not working, so i changed them and now is working
How was u able to get that switch out? I can't find any vids that actually show them taking out the switch button itself
Mr. Hernandez which one is the fuse that controls the door locks?
Wished you had shown how to take apart the switch
Good to know it is likely repairable, to bad your video doesn't show HOW TO DIY". You should consider a video coach, for lighting tips and how to point camera. 😀 it's all good, mechanic aren't supposed to you tube actors. 👍🤣🤣 I
would love to see you take the door panel off! Thanks!
yes i did this half assed i plan on purchasing a camera dedicated to doing this with proper lighting and also going to video edit and take this on more serious.
My mm
How do you program the key fob? I got the door lock buttons to work again thanks to your video but am having a lot of trouble programming and getting my key fob to work. :(
Turn the key on and off 5 times then hold the lock and unlock button on the new key fob
So you had to take the whole door off? Cause I’m having the same problem I can’t lock doors, and key doesn’t work. So if I lock the door imma have to call locks smith
Does that switch come out the top of the tray, or does it come out the bottom of the tray
I have already the button off but u don't show how you take the up part to see the blue rubber, from where I can take off that piece ?
I have a 2011 that the locks are locking/unlocking by themselves and will do at random times. Replaced fuses. Thinking the bcm might be going bad.. ever dealt with that?
Did you solve it?
Same problem here.
would have to pull wiring diagram then trace wires sounds like it may be the bcm. just gotta isolate one problem at a time.
Ey! Can u solve that problem???
How did you get the switch apart
Nice lighting for video
Hi bro, i have a question, i buy the control for the locks, and only one in the passenger seat locks down, the other 3 just stay in their position, what can it be??? I have a Malibu 08.
there is a possibility that the door lock actuators are not functioning. with a volt meter you gotta check if you are getting power to the rest of the doors.
Thanks a bunch! Gonna try this out tomorrow. Hope it works!
Never mind!! Patience, that's how!
How did you get it out? I'm having a heck of a time.
My rear passenger drivers side doesn't work. Can only one lock be affected?
sounds like it may be the door lock actuator if only one door is affected. just have to make sure power is going to the actuator if there isnt then there is a break in the wire sending power to it usually most commnly found on the grommet protecting the cables when yo open and close the door.
Can you show what fuses to look at?
All u had to do was take the door lock fuse out if ur locks are going crazy
Doing that work for you?? Im having the same problem Door locks going crazy UP and down
Pero no pasaste como quitar ese botón
Rubbing alcohol does wonders
Why even make a video?