⛐ Check out our Garage to see what tools we use and recommend: www.amazon.com/shop/worldmechanics ⛐ Subscribe and hit the notification bell by the subscribe button for new videos: ruclips.net/user/AutoRepairGuys ⛐ Our GoFundme Page: www.gofundme.com/auto-repair-guys
Thank you. I was able to swap out a couple bad injectors, replace my spark plugs that were in horrible shape af 75K miles and clean my dirty throttle body. Absolute win. Also want to add that it's easier to remove the part of the intake behind the throttle body if you remove the throttle body first.
Beauty video guys ! Might have to replace the fuel injector on my wife's Cherokee Trailhawk and your video made it much more clear on what has to be done to get that fuel injector out. Well done ! Some advice to others though, it might be a good idea to remove the fuel pump fuse or relay and let the vehicle starve of fuel, that may relieve any possible fuel pressure, and may not leave as much fuel in the rails.
Appreciate the video! It was the exact engine I had in my 2016 Dodge Grand Caravan and I was able to follow everything and get it done. I subscribed and liked too.
Guys, appreciate your videos. Just repeated it on Fiat Freemont (3.6 benzin - dodge joyrney). Doing it for the first time on 3.6 according to your mamual. Many thanks !
You can remove disconnect the fuel pump and try to start the engine a few times to purge the fuel lines before you disconnect the battery and start taking the intake apart.
Your videos are truly appreciated!! I have a 2013 Town & Country of need too replace injectors. I replaced all (6) injectors. Everything went well and smooth sailing, due too your videos that are step by step!! Thank you!!
Remove the lower intake first then remove the injectors so that fuel doesn’t drop into the slot between the oil cooler and block possibly destroying the oil cooler and O-rings.
Thank you so much for this video ! There isn’t a lot of videos about the dodge journey car maintenance! First time working on an SUV type vehicle and it looked intimidating at first but after seeing I had the tools to do it. I attempted to do it while watching this step by step . I found that I didn’t need to remove the throttle body, & from there I just followed the steps ! I decided to change all the injectors as I did get a code p0202. Once I completed the job I went on a test drive and it was prefect ! No check engine light or anything and it actually felt like it drove better.
Thank you for taking the time to do this video. Whomever the team of dodge engineers that designed this aggravating to work on engine are need a quick kick in the groin possibly 2. Thanks again
Looks like you’re performing an engine swap at first haha, who designs these cars like this man? Clearly someone who never has to work on them. Love the video though! 👍🏿
You guys are the best this video helped so much had a fuel injector go on cylinder one watched video took me less than an hour to replace with new one one thing I would recommend is not removing throttle body or coolant hoses both can stay on and still be able to remove all parts needed to fix
Finally, a team that.makes videos without skipping all the bull. Thanks for showing us how difficult it is to remove a plastic resonator, the little red clips, and the secret nuts that are probably there to force you to go to a dealership.
2010 dodge journey v6 Had the code p0302 for cylinder 2 so i replaced all spark plugs and coil pack for #2 and i still have same code just for that #2 cylinder. Ima change the fuel injector to see if it clears
I've replaced the spark plugs because It was throwing up 303. I figured I should just do them all. Car is still misfiring. Gonna do the fuel injectors.
Bonfi just did my fuel injectors Hahaha make sure they are all secure afterwards or you'll have a gas leak hahaha....but still nothing man. Still the misfiring. Abouta go trade this piece in.
I just used your video to change my fuel injectors on the same model. Did you have to do anything to clean up the fuel that spilled out? I had about the same experience as you did in the video and am just worried about the fuel that leaked causing an issue. Thanks.
After examining all necessary information and tools aside, I would properly consider taking a few shop towels or rags and put them in between the cracks and ignition coil areas so as to soak up as much of the slightly spilling fuel rail and after discarding of those rags with keeping in mind having extra shop towels or rags so as to cover or wrap around the preexisting dirty ones and after all said and done I’d thoroughly clean and sanitize the area with a rag and toothbrush if there’s any hard to get spots or any build up whatsoever , hopefully that helps , as I’m embarking on this project in a couple days as well!
I have a question I have a 2016 that is telling me that the #1 cylinder is bad but we already chang the spark plug n the coil and it's still has that code n now when am going 25mph the check engine starts to flash and it shakes can u help me plz
Same problem here on cylinder #3 (probably the worst place). Check engine light and motor shaking like crazy. Had the sparkplugs and the coils changed but still have the problem. One of my friends is a mechanic, he temporarily corrected the problem by knocking somehow on (or in the vicinity) of the injector (without disassembling anything), he told me it is common for those to get stuck. Unfortunately, that lasted only a few days and the symptoms reappeared. I am wondering if some injector cleaner could be used until I get it replaced.
Hello HOPING all is well with you and life is treating you good as you are treating life good, also. WAS blessed by God through my 21 yr old son to help me purchase used 2010 Dodge Journey with just under 80,000 miles. HOMELESS for 15 yrs, 2-3 yrs with vehicle in beginning then on foot for 10 yrs & bicycle for past 3 yrs until last month obtained vehicle with help from my son. HOWEVER, being used vehicle is full of problems in need of repair n maintenance already oil change, needs tune up, now experiencing knocking sound when turn wheel left n right as well as after engine oil change noticed gas is being used quickly as if leaking or something.
I have a 2014 caravan with the same Pentastar engine. Have you ever needed to change the fuel filter> I was unable to find any info in the owner manual.
After replacing the plugs and injectors the mechanic said that we needed another injector is this correct or a way to upcharge. Why is another injector necessary.
Hi I have 2011 dodge Journey which has 225 Km Which gives a engine miss fore Thorabody was changed And BCM was changed too But still the miss fire going on please advice me
Hey my son just did this to my car and now it is having a stalling type feeling when I'm accelerating. Can you please tell me what could've gone wrong? Thanks for all your video on the journey!
Installed wrong. Stalling under accelerating means too much fuel and not enough air. Take it out and redo. Also get good injectors. I personally would rather pay a little more snd get them local over cheap Amazon or eBay.
I have 2011 dodge caravan and have a misfire in cylinder 2 I have changed spark plugs and even coil, as I was replacing spark plug in cylinder 2 it was rusty inside need help because even after changing spark plug still misfire let me know what to do next.thanks
Question why do they have to be replaced. My problem is on a 2011 charger 3.6, 3 of the 6 are leaking were they joint with the rail. And I don't know if it could be the injectors or the rail it self, Just so you know I have the O rings replace already
They would have to be replaced if they are stuck closed or stuck open. If you can visibly see a fuel leak then it’s your orings. Did you use the correct orings? Is your car running rich or lean? If they are leaking at the tail then that cylinder would be running lean from the fuel coming out before the cylinder
It is an updated to my question this Injectors had broken some how so I guess is normal. If you ever have a problem replace them even that they cost 100 a piece
@@misshondabro could you check oreillys or autozone price or maybe dealer there is where I have mine. The thing is I'm doing this for my client and do not have time to wait for Ebay or Amazon plus the warranty on parts and easy access.
I'm having issues with my 2013 dodge journey reading cylinder 3 misfire the engine light on it will flash when acceleration did the spark plugs and ignition coil. Had someone say might be the fuel intake. Any ideas if they on the right track?
So my journey has a miss fire on cylinder 5 and I’ve brought it to a garage two times they replaced the pcm injectior spark plugs and it’s having the same problems on the same cylinder again and I’m not sure what’s wrong
Hello iam from germany and i have a question. Can someone explain me which fuel injector is the P0203 ? If i stay in Front of the car ? You will help me very much :)
I've had a P0171 and P0300 code on the engine for a while now, going on 2 months. It's been in and out of the shop and nobody can seem to find the problem. I've had the catalytic converter replaced after the dealer said that was the problem. The o2 bank 1 sensors have also been replaced. It's also cleared a vacuum leak test showing no leaks. A local AutoZone told me it was the fuel pump that was bad, but my dealer affirms that it isn't the fuel pump because I've been driving it around all this time. My fuel mileage has gone down the drain though in the meantime. The car normally gets 17-19mpg in the city and in the past 2 months it has dropped down to 10-13mpg. Any ideas?
Got the P0300 code myself - everywhere I have looked, seems to state that it's Spark plug or fuel injector related. Could also be related to the EGR valve getting stuck open, but not going to lean to that option yet. Sparks plugs are fairly cheap to change, so that's my first go to. They only need to be changed on the 3.6L Pentastar every 100k miles, but most vehicles are about 30k. Considering I am over 100k on my 2011 - I would assume the previous owner never changed them out. Injectors can be cleaned too if you constantly run cheaper fuels without some sort of fuel line detergents that are added. They get gunked up over time.
G ard - I went ahead and broke it all down and changed the spark plugs out. Cheapest option. I also purchased a Bluetooth code reader that I leave plugged into my car to monitor when a code is thrown and so I could reset them if necessary. After the initial few runs, the car was still a bit rough idling, but it smoother out since. I also used some Red Line Fuel Injector cleaner mixed with a fresh tank of gas. So far I haven’t had any issues. However, I do plan to replace the injectors soon as I believe those will ultimately be the root cause here.
I’ve been told by a lot of people the 3.6 really sucks and you should probably stick with the 2.4. I personally wish I got the 2.4 I’ve had nothing but problems with the 3.6 two trips to the garage and 2,000 dollars later and it’s having the same problem
You read your OBD2 codes. Which ever cylinder misfire you have, that’s the cylinder you work on. Because getting to the spark plugs in this car requires to remove so much, you do the spark plug, the coil, and then the injector at the same time . 9 out 10, it’s going to be the spark or the coil.
If you're having idling problems, try cleaning up your throttle body with some throttle body cleaner. Easy and cheap to do, and might fix the issue before you start spending big money.
I hate those little red locks. He is not kidding when he says to have two hands on them when you remove them completely. I popped one up one handed and I lost it. And you will want to remove them completely because the locks get stuck and it is better to completely remove them so you dont have a seizure when you spend half an hour trying to remove just one or worse, break one.
Just know the four cylinder intakes are a lot more easier than this 6 cylinder you do not have to do none of that what he's doing all it is is one screw pop it up bam is sitting right there
Hi my 2014 dodge journey 3.6 is hesatating while driving but the check engine doesn't turn on what could it be i just changed the spark plugs and cleaned the map but nothing its still hesatating
It could be so many things like low fuel pressure, cam or crank sensor failure, bad injectors, etc You can at a fuel injector cleaner to your tank that my help plus is chep if no no results. You have to wait it eventually will send you a code this new cars are very sensitive
⛐ Check out our Garage to see what tools we use and recommend:
www.amazon.com/shop/worldmechanics
⛐ Subscribe and hit the notification bell by the subscribe button for new videos: ruclips.net/user/AutoRepairGuys
⛐ Our GoFundme Page: www.gofundme.com/auto-repair-guys
Would it be ok to use a vacuum or a small hand pump to pull the fuel out of the injector rail? that's a lot of fuel to leak out
a tip: you can watch movies on kaldrostream. Me and my gf have been using them for watching loads of movies recently.
@Bentlee Fabian definitely, have been watching on kaldrostream for months myself =)
@Bentlee Fabian definitely, I have been using KaldroStream for since november myself :)
@Bentlee Fabian yup, I have been watching on KaldroStream for since november myself :)
Thank you. I was able to swap out a couple bad injectors, replace my spark plugs that were in horrible shape af 75K miles and clean my dirty throttle body. Absolute win. Also want to add that it's easier to remove the part of the intake behind the throttle body if you remove the throttle body first.
Beauty video guys !
Might have to replace the fuel injector on my wife's Cherokee Trailhawk and your video made it much more clear on what has to be done to get that fuel injector out. Well done !
Some advice to others though, it might be a good idea to remove the fuel pump fuse or relay and let the vehicle starve of fuel, that may relieve any possible fuel pressure, and may not leave as much fuel in the rails.
Appreciate the video! It was the exact engine I had in my 2016 Dodge Grand Caravan and I was able to follow everything and get it done. I subscribed and liked too.
Just the video I needed! I successfully swapped out my fuel injectors in my 2014 Chrysler Town and Country because of this video. Thank you!
How did it go? I plan to do this soon on my 2014 Caravan, any tips or lessons learned?
you dont have to off throttle body it will come off with intake with no issue
But if you want to clean it like I had to clean mine, this is the opportunity
Guys, appreciate your videos. Just repeated it on Fiat Freemont (3.6 benzin - dodge joyrney). Doing it for the first time on 3.6 according to your mamual.
Many thanks !
You can remove disconnect the fuel pump and try to start the engine a few times to purge the fuel lines before you disconnect the battery and start taking the intake apart.
Your videos are truly appreciated!! I have a 2013 Town & Country of need too replace injectors. I replaced all (6) injectors. Everything went well and smooth sailing, due too your videos that are step by step!! Thank you!!
Remove the lower intake first then remove the injectors so that fuel doesn’t drop into the slot between the oil cooler and block possibly destroying the oil cooler and O-rings.
You are the best
Felicitaciones
Saludos from Canada
Thank you so much for this video ! There isn’t a lot of videos about the dodge journey car maintenance! First time working on an SUV type vehicle and it looked intimidating at first but after seeing I had the tools to do it. I attempted to do it while watching this step by step . I found that I didn’t need to remove the throttle body, & from there I just followed the steps ! I decided to change all the injectors as I did get a code p0202. Once I completed the job I went on a test drive and it was prefect ! No check engine light or anything and it actually felt like it drove better.
Thank you for taking the time to do this video. Whomever the team of dodge engineers that designed this aggravating to work on engine are need a quick kick in the groin possibly 2.
Thanks again
Looks like you’re performing an engine swap at first haha, who designs these cars like this man? Clearly someone who never has to work on them. Love the video though! 👍🏿
You guys are the best this video helped so much had a fuel injector go on cylinder one watched video took me less than an hour to replace with new one one thing I would recommend is not removing throttle body or coolant hoses both can stay on and still be able to remove all parts needed to fix
THANK YOU THANK YOU THANK YOU. BEAUTIFUL step by step.
There is no need to undo the hoses from the resivior and you don't have to remove the throttle body it's connected to the upper intake
Finally, a team that.makes videos without skipping all the bull. Thanks for showing us how difficult it is to remove a plastic resonator, the little red clips, and the secret nuts that are probably there to force you to go to a dealership.
2010 dodge journey v6
Had the code p0302 for cylinder 2 so i replaced all spark plugs and coil pack for #2 and i still have same code just for that #2 cylinder. Ima change the fuel injector to see if it clears
Rodolfo Lopez did that work?? I’m doing the same thing but to cylinder 3
I've replaced the spark plugs because It was throwing up 303. I figured I should just do them all. Car is still misfiring. Gonna do the fuel injectors.
Nathan Couch code 303 is what I got. I just did spark plugs & coils now just ordered fuel injectors, hopefully that’s the problem!
Bonfi just did my fuel injectors Hahaha make sure they are all secure afterwards or you'll have a gas leak hahaha....but still nothing man. Still the misfiring. Abouta go trade this piece in.
I had cylinder 3 misfire but also with injector 3 error to code was p0303 and p0203 u should get a code if its a injector
super helpful video!
I just used your video to change my fuel injectors on the same model. Did you have to do anything to clean up the fuel that spilled out? I had about the same experience as you did in the video and am just worried about the fuel that leaked causing an issue. Thanks.
After examining all necessary information and tools aside, I would properly consider taking a few shop towels or rags and put them in between the cracks and ignition coil areas so as to soak up as much of the slightly spilling fuel rail and after discarding of those rags with keeping in mind having extra shop towels or rags so as to cover or wrap around the preexisting dirty ones and after all said and done I’d thoroughly clean and sanitize the area with a rag and toothbrush if there’s any hard to get spots or any build up whatsoever , hopefully that helps , as I’m embarking on this project in a couple days as well!
What kinda of spray did you spray on the injectors to go in
What kind of lube was that you sprayed on the o rings and can I use something like WD40
I have a question I have a 2016 that is telling me that the #1 cylinder is bad but we already chang the spark plug n the coil and it's still has that code n now when am going 25mph the check engine starts to flash and it shakes can u help me plz
Ours is doing the same thing. I am guessing injector for ours. I am curious What ended up being the problem with yours?
Same problem here on cylinder #3 (probably the worst place). Check engine light and motor shaking like crazy. Had the sparkplugs and the coils changed but still have the problem.
One of my friends is a mechanic, he temporarily corrected the problem by knocking somehow on (or in the vicinity) of the injector (without disassembling anything), he told me it is common for those to get stuck. Unfortunately, that lasted only a few days and the symptoms reappeared. I am wondering if some injector cleaner could be used until I get it replaced.
Great video guys.just one bit of advice when working on vehicle take of jewelry cz of something shorts out by battery , u can loose a finger.
Hello
HOPING all is well with you and life is treating you good as you are treating life good, also.
WAS blessed by God through my 21 yr old son to help me purchase used 2010 Dodge Journey with just under 80,000 miles.
HOMELESS for 15 yrs, 2-3 yrs with vehicle in beginning then on foot for 10 yrs & bicycle for past 3 yrs until last month obtained vehicle with help from my son.
HOWEVER, being used vehicle is full of problems in need of repair n maintenance already oil change, needs tune up, now experiencing knocking sound when turn wheel left n right as well as after engine oil change noticed gas is being used quickly as if leaking or something.
When he said “this thing is ridiculous” i knew i was watching the right video 🤣🤣
Thanks for the video! I did exactly what you guy did, but now I smell gas when my van is idling. Is there something I did wrong?
great video but you definitely don't need to remove the throttle at all you just got to wiggle it a little
2017 Dodge journey wiring problem tried to replace battery now hooking up wires it's sparking will not crank smell burn wire
Ok after installing new injectors what is the process of turning on the vehicle? Do u have to prime it or how does that work? Thanks I appreciate it
After reassembly, was air trapped in the fuel line? If so, did you have to bleed it through the valve?
Thank you kindly.
You do not have to remove the bottom bolts from the front bracket just loosen the bottom bolts and move the bracket over
many many thanks for your demonstration
I have my check engine light one,any fixes?
I have a 2014 caravan with the same Pentastar engine. Have you ever needed to change the fuel filter> I was unable to find any info in the owner manual.
Hi guys, do you know why an injector is loose and how I can fix it?
Please do diferencial oil change on dodge journey xt 2012,and thank you
Does 2.7 petrol engine requires tune after fuel injector replacement? How would tune the engine. Dodge Journey R/T
hi! can you show how to find a vacuum leak
Will the 3.6 injectors fit the 2.4 or 4 cylinder engines?
Please you have video about fuel tank and fuel pump of journy thanks for your support
After replacing the plugs and injectors the mechanic said that we needed another injector is this correct or a way to upcharge.
Why is another injector necessary.
Hi I have 2011 dodge Journey which has 225 Km
Which gives a engine miss fore
Thorabody was changed
And BCM was changed too
But still the miss fire going on please advice me
Hey my son just did this to my car and now it is having a stalling type feeling when I'm accelerating. Can you please tell me what could've gone wrong? Thanks for all your video on the journey!
Installed wrong. Stalling under accelerating means too much fuel and not enough air. Take it out and redo. Also get good injectors. I personally would rather pay a little more snd get them local over cheap Amazon or eBay.
What are the stock size of injectors ?
I have 2011 dodge caravan and have a misfire in cylinder 2 I have changed spark plugs and even coil, as I was replacing spark plug in cylinder 2 it was rusty inside need help because even after changing spark plug still misfire let me know what to do next.thanks
Try the injector
I have same exact problem did you do it and did it fix it please let me know johnwaynekelly@gmail.com
You ever figure out what was wrong? Did you ever change injectors? I having the problem.
Question why do they have to be replaced. My problem is on a 2011 charger 3.6, 3 of the 6 are leaking were they joint with the rail.
And I don't know if it could be the injectors or the rail it self,
Just so you know I have the O rings replace already
Is it common for the injectors to leak thanks for your response in advance
They would have to be replaced if they are stuck closed or stuck open. If you can visibly see a fuel leak then it’s your orings. Did you use the correct orings? Is your car running rich or lean? If they are leaking at the tail then that cylinder would be running lean from the fuel coming out before the cylinder
It is an updated to my question this Injectors had broken some how so I guess is normal.
If you ever have a problem replace them even that they cost 100 a piece
666 666 I just bought one for $11.65
@@misshondabro could you check oreillys or autozone price or maybe dealer there is where I have mine.
The thing is I'm doing this for my client and do not have time to wait for Ebay or Amazon plus the warranty on parts and easy access.
I'm having issues with my 2013 dodge journey reading cylinder 3 misfire the engine light on it will flash when acceleration did the spark plugs and ignition coil. Had someone say might be the fuel intake. Any ideas if they on the right track?
Is it the same process for the 2.4L
No
I replaced a alternator and did a tube up now my car is making popping noise / sounds like a gun what do I do
I need a video on a fuel filter. I have a 2012 set model engine 2.4L v6
2.4 V6?
Take your car to a garage my friend lol
I want to know , why there is excess water come from passenger side exhaust.....???
my suv is at the dealer right now in cali They want $950 to change out cyclinder 3 injector
How can I replace injectors wire, mine is broken.
So my journey has a miss fire on cylinder 5 and I’ve brought it to a garage two times they replaced the pcm injectior spark plugs and it’s having the same problems on the same cylinder again and I’m not sure what’s wrong
Bad wiring, or a bad coil. They should’ve gone the coil with the injector.
I can hear the propane heater in the background lol
How to replace fuel pump 2009 Journey
I have 2.4 caravan 2006 I have gas to rail injectors getting pulse but will not start
I change all of them🍺🍺🍺
Can you use wd40 to push in new injectors ? Thanks
WD40 is not friendly to o-rings. I wouldn't use it.
Hello iam from germany and i have a question. Can someone explain me which fuel injector is the P0203 ? If i stay in Front of the car ? You will help me very much :)
Been a year so I’m sure you figure this out but Cylinder 3 the last number refers to the cylinder
What is this lubricant?
I've had a P0171 and P0300 code on the engine for a while now, going on 2 months. It's been in and out of the shop and nobody can seem to find the problem. I've had the catalytic converter replaced after the dealer said that was the problem. The o2 bank 1 sensors have also been replaced. It's also cleared a vacuum leak test showing no leaks. A local AutoZone told me it was the fuel pump that was bad, but my dealer affirms that it isn't the fuel pump because I've been driving it around all this time. My fuel mileage has gone down the drain though in the meantime. The car normally gets 17-19mpg in the city and in the past 2 months it has dropped down to 10-13mpg.
Any ideas?
Got the P0300 code myself - everywhere I have looked, seems to state that it's Spark plug or fuel injector related. Could also be related to the EGR valve getting stuck open, but not going to lean to that option yet. Sparks plugs are fairly cheap to change, so that's my first go to. They only need to be changed on the 3.6L Pentastar every 100k miles, but most vehicles are about 30k. Considering I am over 100k on my 2011 - I would assume the previous owner never changed them out. Injectors can be cleaned too if you constantly run cheaper fuels without some sort of fuel line detergents that are added. They get gunked up over time.
my 2011 started with a P0300 do you mind updating on what finally resolved your issue
G ard - I went ahead and broke it all down and changed the spark plugs out. Cheapest option. I also purchased a Bluetooth code reader that I leave plugged into my car to monitor when a code is thrown and so I could reset them if necessary. After the initial few runs, the car was still a bit rough idling, but it smoother out since. I also used some Red Line Fuel Injector cleaner mixed with a fresh tank of gas. So far I haven’t had any issues. However, I do plan to replace the injectors soon as I believe those will ultimately be the root cause here.
@@jj12190 thanks. P0300 is so vague and only 32000 miles on her
What’s the torque specs for the reassemble from the oil cooler up anybody know ???
Replaced mine now it’s having a hard time starting
I have Dodge Journey 2017 2.4l crossroad can I Change engine 2.4 to 3.6. ?
I’ve been told by a lot of people the 3.6 really sucks and you should probably stick with the 2.4. I personally wish I got the 2.4 I’ve had nothing but problems with the 3.6 two trips to the garage and 2,000 dollars later and it’s having the same problem
@@andygodden8880 the 3.6 is awesome. This thing will do 110 up a hill
You are insane. The 3.6 pen taster is one of Chrysler’s most reliable engines.
How do yu find out which fuel injector to take out
You read your OBD2 codes. Which ever cylinder misfire you have, that’s the cylinder you work on. Because getting to the spark plugs in this car requires to remove so much, you do the spark plug, the coil, and then the injector at the same time . 9 out 10, it’s going to be the spark or the coil.
how do you replace a fuel filter on a dodge journey
If your car is stuttering a little while stopped and when trying to accelerate what could this be?
If you're having idling problems, try cleaning up your throttle body with some throttle body cleaner. Easy and cheap to do, and might fix the issue before you start spending big money.
Changes mine and now my engine light flashes I feel defeated asf
I have a problem with my 2012 dodge journey 3.6
Познавательно
Can my injectors be bad and not get a code
You don't have to remove the back bracket neither
Could you tell me is this GDI or GPI?
Port injection
@@frazercollins9559 thank you.
I hate those little red locks. He is not kidding when he says to have two hands on them when you remove them completely. I popped one up one handed and I lost it. And you will want to remove them completely because the locks get stuck and it is better to completely remove them so you dont have a seizure when you spend half an hour trying to remove just one or worse, break one.
Where is my fuel filter I have 2013 dodge journey
2016 dodge journey with a 4 cylinder. How do you change the injectors? Thanks!
Just know the four cylinder intakes are a lot more easier than this 6 cylinder you do not have to do none of that what he's doing all it is is one screw pop it up bam is sitting right there
24:16
I need a 4-cylinder
Where's the fuel injectors on a 2010?
Hi my 2014 dodge journey 3.6 is hesatating while driving but the check engine doesn't turn on what could it be i just changed the spark plugs and cleaned the map but nothing its still hesatating
It could be so many things like low fuel pressure, cam or crank sensor failure, bad injectors, etc
You can at a fuel injector cleaner to your tank that my help plus is chep if no no results.
You have to wait it eventually will send you a code this new cars are very sensitive
So basically you have to take the entire vehicle apart to change them lol
remove injectors on 2.4 engine
The Dodge place charged me 640 to do mines
Not a terrible cost there actually (and I am shocked), considering just one injector runs about $100 bucks at a local parts supply store.
Getting into these engines is relatively easy. I am not a mechanic and change all spark plugs and ignition coils is under an hour.
That’s highway robbery
on 2.4 engine
Me van a disculpar pero pura brutalidad y cero cuidado con las piezas a desarmar. Palancas y más. Puf. ¡,
P
Honda accoad