DODGE JOURNEY SPARK PLUGS REPLACEMENT 3.6 V6 FIAT FREEMONT
HTML-код
- Опубликовано: 23 фев 2019
- DODGE JOURNEY SPARK PLUGS REPLACEMENT 3.6 V6 FIAT FREEMONT
► Spark Plugs: amzn.to/2GHLn1w
If you need to replace spark plugs this is the right video for you. We will show you how to replace the spark plugs on Dodge Journey. The rest of the world Dodge Journey is known as Fiat Freemont so the procedure to replace the spark plugs on Fiat Freemont will be the same for the 3.6 v6 engine. We demonstrated on a 2012 Dodge Journey 3.6 V6 Engine.
This video might be helpful on:
2009 Dodge Journey Spark Plugs Replacement Removal Torque Specs 3.6
2010 Dodge Journey Spark Plugs Replacement Removal Torque Specs 3.6
2011 Dodge Journey Spark Plugs Replacement Removal Torque Specs 3.6
2012 Dodge Journey Spark Plugs Replacement Removal Torque Specs 3.6
2013 Dodge Journey Spark Plugs Replacement Removal Torque Specs 3.6
2014 Dodge Journey Spark Plugs Replacement Removal Torque Specs 3.6
2015 Dodge Journey Spark Plugs Replacement Removal Torque Specs 3.6
2016 Dodge Journey Spark Plugs Replacement Removal Torque Specs 3.6
2017 Dodge Journey Spark Plugs Replacement Removal Torque Specs 3.6
2018 Dodge Journey Spark Plugs Replacement Removal Torque Specs 3.6
2019 Dodge Journey Spark Plugs Replacement Removal Torque Specs 3.6
2012 Fiat Freemont Spark Plugs Replacement Removal Torque Specs 3.6
2013 Fiat Freemont Spark Plugs Replacement Removal Torque Specs 3.6
2014 Fiat Freemont Spark Plugs Replacement Removal Torque Specs 3.6
2015 Fiat Freemont Spark Plugs Replacement Removal Torque Specs 3.6
2016 Fiat Freemont Spark Plugs Replacement Removal Torque Specs 3.6
2017 Fiat Freemont Spark Plugs Replacement Removal Torque Specs 3.6
2018 Fiat Freemont Spark Plugs Replacement Removal Torque Specs 3.6
2019 Fiat Freemont Spark Plugs Replacement Removal Torque Specs 3.6
PRODUCTS USED IN THE VIDEO:
► Panel Removal Tools: amzn.to/2tfiEZD
► Screwdriver Set: amzn.to/2tbcI3W
► Tool Set: amzn.to/2TCHRca
► Plastic Clips: amzn.to/2UZUuOW
► Makita Impact: amzn.to/2DXXQfs
► Our Website: mechaniclifestyle.com
► Our Baby Girl Channel: goo.gl/WiVs8Y
► Our Second Car Channel: goo.gl/XB6fHq
► Honest Product Review Channel: goo.gl/sMPQXk
► GoFundMe Link: goo.gl/pUife3
Our Most Popular Videos:
► Bumper Repair: goo.gl/XBe4Sh
► Missing Wheel Lock: goo.gl/5n4a5i
► Bearing Replacement: goo.gl/JSNDnZ
► Restore Headlights: goo.gl/qVhDkf
♦♦♦ Cameras & Gear Used For This Video ♦♦♦
•Cameras
Panasonic Lumix FZ300: amzn.to/2BNWtNA
•Tripod
Polaroid 72-inch: amzn.to/2iVTmP4
•Microphone
Polaroid Pro Video Condenser: amzn.to/2krpSsA
•Light
NEEWER 160 LED CN-160 Dimmable: amzn.to/2jjg9Bd
•Comuter for editting
Lenovo ideapad 310: amzn.to/2kqUNFl
♦♦♦ Other Equipment and Gear that I use ♦♦♦
•Camera
Sony HD Video Recording HDRCX405: amzn.to/2jk8nqB
•GoPro HERO5 Black: amzn.to/2ktNKfj
•Extra Computer For Editting
Lenovo Ideapad 510: amzn.to/2ktOuB7
► Like Us on FACEBOOK: / worldmechanicsofficial...
► LIKE & SUBSCRIBE for MORE DIY VIDEOS that could SAVE YOU BIG $$$$$$$ !!!
This is not a sponsored video. Everything is purchased by us!
The video is meant for entertainment purposes only. Do not Attempt!
AMAZON ASSOCIATES DISCLOSURE
Auto Repair Guys is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com
*Disclaimer
We, Auto Repair Guys, are not responsible for property damage or injury incurred as a result of any of the information contained in this video. Information given in this video does not guarantee the desired outcome. Any injury, damage or loss that may result from improper use of the tools, equipment, or the information contained in this video is the sole responsibility of the user and not Auto Repair Guys. 
Авто/Мото
⛐ Check out our Garage to see what tools we use and recommend:
www.amazon.com/shop/worldmechanics
⛐ Subscribe and hit the notification bell by the subscribe button for new videos: ruclips.net/user/AutoRepairGuys
⛐ Our GoFundme Page: www.gofundme.com/auto-repair-guys
My 2015 Dodge Journey V6 3.6 l shaking when accelerating in drive and making a knocking sound what could it be could it be the timing chain let me know
I wanna thank you guys I just did this on my dad's dodge without this video I wouldn't be able to do it it's Oct 2022 I really appreciate it thank you
Thank you for not editing when having trouble getting things out we need to know things may need extra work too many videos make things look simple and it isn't so thanks for that
I was going to change my plugs myself. But seeing all the shot you just did 🤔I'm gonna pay someone else.
I’m thinking that as I watch this 😂
Lmao I was thinking the same thing I’m pay somebody
Seriously 😳 I changed my own on my 08 caravan I had. When the mechanic quoted me the price to change them on my journey, I thought ha I'll do it. Watching this 🙄 it's going back to my mechanic lol
Right f that😭🤦♀️
Yeah I did that.. $34 for plugs 75 for labor. 34x6 so close to $280 for parts and labor.
This was stupid hard. My F150 is so much less complicated to do such an easy repair. But thank you guys for the awesome contents and not editing out where you guys had problematic issues. I’m definitely taking this to a dealership to get this fixed. Lol. You guys are great mechanics. Give yourself some more credit.
I just finished replacing my plugs using this video and the job went well. For those that feel it may be too difficult, it looks much harder then it is. The most dificult part was getting the "back piece" that connects to the "Throttle Body" both off and back on. Notes: 1: I did not have to remove the hose from the coolant tank to get that "back piece" off. 2: On the "back piece", his front clip was NOT broken, the back two clips pop up but the front one slides off the clip (pull it towards the rear when the back two are popped up). 3: Removing the part between the air cleaner filter box and the "back piece", there were a number of things clipped to it that needed to be un-clipped that he did not have. 4: Installing upper intake manifold instructions: (A) hand start all attaching bolts (B) Tighten bolts gradually starting in the center working outward until a torque of ? (He said 7-9 Nm but I also read 12 Nm) is obtained. 5: I did not remove the "Throttle Body" from the manifold. In hindsight I wish I had removed it and cleaned it, he also has a vid on cleaning it {ruclips.net/video/3od7A_fFob8/видео.html&ab_channel=AutoRepairGuys}, (Canadian Tire sells the cleaner for $10.49).
Putting back the back piece was really a mission.
I just want to say "Thank you" to you guys! I have a 2014 Journey V6 R/T and several of your videos have been extremely helpful for me! Yesterday I was having a "misfire on cylinder 1" causing the car to shake when accelerating. I've never "fixed" a car on my own before but thanks to y'all I was able to fix it myself for $40! Cheers!
Changing my coil 1 for the same thing today actually lol
@@zachjenkins8164 SAME HAHA Apparantely coil 1 fails first.
I just changed the sparkplugs on my journey. the order of taking off parts is not right. and there is one part that you don't need to separate to do the job. once you disconnect the hose from the air filter, the cylindric part behind the upper intake, leave it there, until you remove the upper intake. also the part with the 4 same screws between the hose and that cylinder part, you don't need to disconnect it, leave it connected to the upper intake. once you remove the upper intake, the cylindric part behind comes out super easy and you save time. just make sure you detach the plastic clip
Karen lmao
@@jasonbaragar3559 ¡diot
@@heartwarrior9762 lol you da man bro love you too brother
Thanks for the walk through. I was able to follow along easily and changed all my coil packs and spark plugs successfully! But I do agree with the other people in the comments, we have had so many issues, we dont like our Dodge Journey either😔
i just got to say... THANK YOU so much!!! you guys really went through the trouble to answer all the stupid questions that I had.
I did it myself for the second time..... had a missfire before and watched his video. Now im changing all the coils and sparkplugs and watched again for a refresher and got the job done in just over an hour. Great video!
This is hands down the best video on how to change spark plugs on a 2019 Dodge Journey. My boyfriend and I followed your video step by step due to how well you describe what you're doing and then show how to do it as well. We will definitely be watching more of your videos in the future if need be. 😃
Thank you ...I have a 2013 n you guys just made it easy for me to try to do this job myself
This is my project for tmrw so this outta be fun lol
this is better than text book thankyou please make more videos on the Dodge Journey. thank you
Thanks guys, video really helped me. Now the DJ is running better than ever. Keep up the good work.
You guys are very knowledgeable this video was a great help in changing the sparkplugs...it was a headache doing it but following this video I was able to do the job right...thanks guys you rock!
I’ve had to watch this video twice and I really want to thank you, you are awesome
You are de best!!
I use a lot of tips on my JOURNEY.
Guys I just did this today. Don't get overwhelmed, it's actually a very easy task. Took me about an hour.
your videos are so detailed and you dont miss a thing every bit of information is goos
I just bought one, 2012 RT I subscribed and may need future Help from your videos .
Thanks for Sharing your skills and tips.
Saving money is a Great idea.
Hey keep up the good work! But if you remove the bracket on the right side of the engine you’ll need a open end spanner or deep socket. Remove this and you can pull top cover and throttle body off in one saves heaps of time
Awesome instructional video. Nice watch too.
I love this guy.
The spark plug tubes are thin wall, so be careful and keep your extension and socket straight. A thin wall 5/8 spark plug socket is best to use.
Great camera work
Awesome video. Thanks!
Thank you!!! I did it!!!!
You guys are great. Have you ever had to replace the viscous coupler for AWD system?
Thank you for what you do
Delighted that you have made repair videos for this vehicle, this is the third family car (E46 BMW and Hyundai Elantra being the others) that I have used from your play list, so a big thank you.
In the absence of any obvious issues or codes, how many miles do you recommend for changing out the plugs and ignition coils?
U guys are awesome very detailed
That white towel with red stains at minute 3:49,.... is all the blood from scraping his knuckles trying to get that plastic piece out!
That's why video skips so quickly
🤣🤣🤣
Thanks for the video.
After watching this video I will be taking my Dodge Journey to the shop that .
Damn what a mission why couldn't dodge make it more harder
I know right lol
Can you make a video of the repair of the infamous "ticking" of the engine.
Did you ever figure it out mine is doing it now
@Dr. Greenthumb yes
Might be bad rocker arms
Thank you guys for saving me a ton of time with repairs to my 2013 journey. I recently had a check engine light come on with a code p0740, any idea what I need to check?
O2 sensor
Thanx for the assist. Though a couple of changes. you would be better off worrying about the throttle body after you remove the intake disconnect all electrical connections and vacuum lines from the throttle body. Disconnect the resonator and remove the air tube. Push the resonator back towards the firewall and remove the intake. Once the intake is out, then you can pull the resonator.
Great video. Can u do front right abs sensor.
Excellent 🔥
Great Video.
Alright....spark plugs are now replaced, but I was getting an electronic throttle control light, and an abs light after the reinstall. I had the wife drive the car around the neighborhood, and I double checked my sensor connections. At this point, I am still getting the traction control and a check engine light, and the performance of the engine is diminished. It runs just fine, but wont rev above 2500 rpm even though it will hit highway speeds. Any recommendations? Thabks for the video. It was very informative and very well done!
Not fair I didn't know you were born with three hands that makes it a lot easier I'm sure 😂😂😂😂😂
Brother, all this for damn spart plugs lol, I was searching to where they were before I even started and damn, might as well make us take out the whole damn engine, lol. I just changed my 2018 Kia Fortes spart plugs and said to myself "might as well do my Journey." Yeeeee going to wait until I truly need to now lol fudge that!
Great Video, i build Engines for a living and believe me some bolts and there placements make no sense.
How about a video on the motor mounts?
That would be extremely helpful!!!!!
When doing the spark plugs, are the coils easily assessable to replace as well? What about the throttle body, how do you take it off and clean properly? Thanks
O man. I think I will just sell my Journey.
Good luck with that
@@tclay1985 sounds like you are trying to sell yours.
Have you made a video for the Wheel bearings on the dodge journey?
Is there a difference between the 2015 3.6l v6 and the 2018 3.6l v6. Looking to add a cold air intake, but can't seem to find one for a 2018 dodge journey.
That’s the same thing when open the Dodge Journey 2010?
Grasias😁👍🏼
Thank you so much, you saved me so much money!! You all are awesome.
Do you have to reset the computer when replacing spark plugs on 2.4 Dodge Journey 2015
Can you make a video detailing the way to remove and replace the Bluetooth module from under the drivers side dash in a 2013 dodge journey rt please? 8.4 unconnect radio with navigation , Bluetooth and voice recognition. Much appreciated 🙏
Can you please do a video to replace rear washer fluid nozzle on 2013 journey? Thanks.
Im working on one now and I did not have to remove the throttle body. I just removed 6 bolts and intake screws and the wire harness on intake and took the whole intake off. In less than 5 min. You only need a 13mm wrench and deep socket and 8mm socket..
yes!!! thank you! i just said that!
fegetta1 he said he needs to remove it because they are doing a video for later how to clean the TB.
Ohh ok. That makes sense if there making a future video for indept discriptions
Hi AutoRepairGuys. I have a 2013 journey 3.6L 91k miles. idle is a little rough when warm and idles about 600rpm. No check engine light. Would you recommend spark plug replacement and throttle body cleaning?
great video. thank you. my 2011 journey has only 32000 miles but I have a P0300 code. do you have any tips to pinpoint if it is spark plug or coil problem. thank you
I'm throwing same code on my 2015. If I find anything i'll comment. Have you found anything since?
@@ProToolsApproved nothing but I am hearing even Durangos with same engine have issues. I ran mine on highway with different consistent speeds and rpms and seems to have cleared up for now whatever is wrong with it
@@gard567 the CEL turned off on mine as well but I went forward with the tune up. Plug tunnels #3 & #5 were full of oil. So off came the value cover. All went well with patience. But putting it back together I had a terrible hard time finding torque specs and with everything being plastic (GRRRRRR I HATE THIS) I cracked one of the cam sensor things that go into the side of the value cover. So now I have a decent oil leak. Tearing it all back down again today to replace
Hi guys, any idea why smoke would happen after everything has been put back together?
Hi friend I have a question , my dodge journey sometimes when I turn it on is shaking for seconds what do u think is the problem🤔
Will this exact video be the same for 2017 dodge journey?
Hello, I have a Journey 2016. When can I know that I need to change that piece? What is the improvement if I change that?
Thank you all.
Does the tire have to be taken off to disconnect the battery before changing the spark plugs
Do you have a video for just cylinder 1
Every time I start my 3.6 sxt Journey I notice a loud rattling till it gets oil pressure, is that normal?
I’m trying to figure out where my fuel filter is on my 2015 3.6 sxt Journey
I have a crank no start issue going on. I got a new battery, and camshaft sensor. I've tried the relays. It's getting fuel and it has spark plugs that are only 2 months old do you have any idea what the issue could be
I have a 2014 journey and it has a ticking noise in the engine. Any idea what it might be and how to stop it? I heard it might be the rocker arm.
Theres an open recall on some models for failing rocker arms
I left the backing piece in the back, and didnt take the throttle actuator off. If you leave the back piece in the back and work on removing the intake, you can just take it out after you remove the intake.
You guys should've done the back I don't have enough room and trying to figure out how to get back there
dope
Hey guys, really need your help??!! I have a 2018 Dodge Journey SE with only 46,258 miles on it. I’ve checked everything on this vehicle a bunch of videos but y’all is the best. My issue is when I give my car gas on the gas pedal and let off the gas pedal… it does this hiccup shimmy thing like it’s not getting air or gas. NO CHECK ENGINE LIGHT 💡. I have 2 diagnostic machines and they say everything is fine. Not true and the mechanics want to charge me a ton for a check but with no light they won’t do anything!!! I saw a video from y’all about replacing the gas pedal, do you think that might be it? I’m just stumped guys. It honestly has NO POWER on or off hills which I know is normal but to have it happen on a flat ground isn’t right. I’ve changed the spark plugs and the edge that touches the motor is black around the edge of the circle. I know that’s normal sometimes.any ideas on this? I was thinking maybe a gas filter? I changed all air filters, spark plugs, and have even put fuel cleaner through it many times and it still gets bad gas mileage, sometimes even when just at an idle stop…. SOMETIMES it feels like it’s going to stall so I thought maybe it was the timing belt or chain? Don’t know how to check that though. How do I know if it might be the transmission? And ideas or scenarios I can try to figure this out??? I’m moving further away from my kids and need my car in great shape… please help me out…
I have a 2018 Dodge Journey SE and I’m trying to install a complete subwoofer systems but I don’t want to mess it up, can y’all help me out?
I replace the the spark plugs of my 15 journey and successfully I replace but the problem is multiple after the installation failing of MAF sensor, throttle and several codes pops. What I have to do to fix this? Thanks
How about how to replace a water pump on 2013 journey?
09 2lt crd 40000 miles gear box problems.Dealer wants £4500 to fix. can we please have videos on gear box oil change. checking gearbox oil levals etc
If you take the intake off first it will come out very easy.
where is the PCV valve located on this engine? NOt the purge valve.
Hi! Auto repair guy😊 may I know the torque specs for the rear driveshaft propeller to the transmission? It’s the 6 8mm bolt. Thanks in advance.
What are the intake manifold bolts and foot pounds or inch pounds
Crazy they make it that difficult to just get access to them, they rip us off hoping we go to the dealership for maintenance and car manufacturers should really get in trouble for that
Any TRANSVERSE-MOUNTED V6 DOHC will require this kind of job in order to get access to the spark plugs!
lol you haven’t seen Toyota v6 job then . Those are pain in the ass
My 2016 dodge journey stutters at the red light like it’s going to die… I’ve changed the spark plugs (there is no check engine light) … what can I do next?
Having problem with the coolant not going to the radiator I change the hose already so now every other week I have to fill the radiator with coolant. Maybe you can help?
Check the oil cooler mines was doin the same thing last week
Try oil cooler
Hey quick question I have a Dodge Journey I haven did a tuneup to it yet and it been Shaking everytime I stop what can it be
Spark plugs
I had a misfire on call number three so I change the coil pack On number three and all six spark plugs And it’s still misfiring I change the gaskets and I still miss firing what’s my next option
also getting misfire on cylinder 3. Only happens when cold starting the vehicle. Misfires twice. Try cleaning your mass airflow sensor with mass airflow cleaner.
You guys made it harder on your self's taking out that filter.. Could of tooken off the upper plastic by the window to access the back of the motor
What happens to the good old days of open hood apark plug and wires right there... Making a 5 minutes job and turning it into a hour job
A lot of work should use log lasting plugs
Just replaced the plugs on 2012 journey. Car sat for a week while waiting on repairs. Now it will not start everything’s plugged back in the way it was before. Any suggestions?
did you forget to plug back your battery? or the battery could be dead?
Where the fuel filter located in 2010 journey?
What's the estimate time on this job?
Great detailed video. These are horrible engines to do a tune up on, worse design. Rear O2 sensors are just a bad to get to..
My 2016 journey shudders while driving also at idle what could cause this
Could need a tune up and an idle pulley took mine to the shop for that today.
❤❤❤
Do a 2014 Jeep Grand Cherokee they have a bracket like that and it’s a pain in the butt
Got the 4.0 engine video
Not on a journey you fool
At how many miles should the spark plugs be changed?
itis hard the tell, but ruffly, every 50,000 miles max
The ones I buy are 100k warranty
Please list torque specs in description.