Did it work for you because I did exactly what you did but mine didn't work. The service Stabilitrack still comes on, but with my truck, it still drives smooth without any breaks locking up. So did you grounding the wire work for good and did have to make more changes to fix it? I bought the 07 last week. Thanks
Ahh man ur throwing parts at it...it's not that but atleast u know u have a new master cylinder and booster...steering wheel osition sensor should fix that issue...only thing is OEM part from GM is no longer avlble its discontinued EVERYWHERE!!!
I have a 07 yukon with the same lights popping up and I had dash cluster issues. I had the cluster rebuilt from a local guy that does that for a living. I need to try the ground strap and check all wheel speed sensors
@@charmer486 update: turns out it was just my ABS fuse was old and needed to be replaced. LITERALLY. Everything works good as new again and i drove an additional 20 miles just to be sure.
I have 2011 Escalade esv with check engine code po300 and stabilitrak light on! Got new spark plugs, intake, solenoid, maf sensor and fuel injector and still nothing fixed it. Only misfire when idle. Does anyone have any idea what could it be?
I have the same thing going on Its the head gasket cylinder 7.. I got the engine coil spark plug and fuel injector changed ..then found out it was the head
![Felix "Unfair" | [Stray Kids : SKZ-PLAYER]](http://i.ytimg.com/vi/Oswujxm2Ag0/mqdefault.jpg)
Hell yeah just fixed my 2010 escalade this way saved me from changing all the battery cable wires and possibly even more crap
Thank you for reminding me to not buy one of these that have seen northern salt roads.
What did u do Whit the old fround wire did u leave it connected?
It was removed and replaced with a new one
I also changed my calibers they was locking up on me on my caddilac escalade I changed the brake hoses and new calibers in the front
@Westside TV no fix the problem
Did it work for you because I did exactly what you did but mine didn't work. The service Stabilitrack still comes on, but with my truck, it still drives smooth without any breaks locking up. So did you grounding the wire work for good and did have to make more changes to fix it? I bought the 07 last week. Thanks
It worked for as long as I had the truck…. If you’re still having that issue you might need a new booster
Have u fixed this problem? I've had the same problem..look into the steering wheel position sensor and change it
Unfortunately it didn’t fix that issue but it did fix the electrical issues I had…. I ended up replacing the brake master cylinder and brake booster
Ahh man ur throwing parts at it...it's not that but atleast u know u have a new master cylinder and booster...steering wheel osition sensor should fix that issue...only thing is OEM part from GM is no longer avlble its discontinued EVERYWHERE!!!
@@LamzLamz714 there’s a place called a1auto.com they’ll have it
I have a 07 yukon with the same lights popping up and I had dash cluster issues. I had the cluster rebuilt from a local guy that does that for a living. I need to try the ground strap and check all wheel speed sensors
Thanks for making this video
You’re welcome
What gauge wire did you use to ground the engine?
I don’t quite remember but it’s between 8-10 gauge
I have this problem too buy my tachometer isn’t displaying anything and it is taking longer than normal to start it up.
Take a look at the wiring under the fuse box to see if anything is loose
@@charmer486 will do
@@charmer486 update: turns out it was just my ABS fuse was old and needed to be replaced. LITERALLY. Everything works good as new again and i drove an additional 20 miles just to be sure.
I have 2011 Escalade esv with check engine code po300 and stabilitrak light on! Got new spark plugs, intake, solenoid, maf sensor and fuel injector and still nothing fixed it. Only misfire when idle. Does anyone have any idea what could it be?
I’d recommend replacing the coils too also check and clean the grounds
Sorry I forgot to mention, I did replace the coil, only on cylinder 6, since it’s giving me a code po306
Check the wiring to the coil also check the injector to see if it is clogged or not getting power
I’ll have the check the wire, I know they replaced the fuel injector
I have the same thing going on Its the head gasket cylinder 7.. I got the engine coil spark plug and fuel injector changed ..then found out it was the head
Did you fix it
I did end up replacing the brake master and booster due to issues caused my the bad ground
Just add your own grounds and check under the truck by the gas there should be a ground cable there too just clean it up
nice ride bro!
Thank you
That's how you feel..
It's a piece ...of shit .it's a expensive piece..yeah Rusty