[How to]Repair a Corrupted Flash Drive using CMD (Command Prompt)

Поделиться
HTML-код
  • Опубликовано: 11 сен 2024
  • -------------- READ DESCRIPTION FIRST --------------
    This method intends to fix a corrupted flash disk partition by manually formatting it.
    In other words, this will DELETE all of your contents on your flash disk.
    Use the data recovery software above to recover lost files.
    --------------------------------------
    Message me!
    m.me/techshaunor

Комментарии • 1,2 тыс.

  • @doomnationalist
    @doomnationalist 9 лет назад +48

    Instructions in short:
    Go to "CMD"
    1.diskpart
    2.list disk
    3.select disk x (x being the usb)
    4.clean
    5.create partition primary
    6.active
    7.select partition 1
    8.format fs=fat32 quick

    • @bogdanputineanu3543
      @bogdanputineanu3543 9 лет назад

      Thank you :) I solved my problrm really fast.

    • @champ3z
      @champ3z 9 лет назад +1

      Thanks for the short info.

    • @karthikklein
      @karthikklein 9 лет назад

      That Other Guy After selecting disk 1
      It's Showing " Microsoft diskpart version 6.1.7601"
      In Next step i entered clean It is showing * There is no disk selected *

    • @rosefrags1489
      @rosefrags1489 7 лет назад

      you have to select the flash drive disk. i could be 1,2 ,3 etc

    • @migz5995
      @migz5995 4 года назад

      Thabks

  • @mohohunter15
    @mohohunter15 10 лет назад +2

    This video has saved me two times now when my computer was only recognizing a 64gb flash drive as 1gb and would not format it. The second time was with a 2gb flash drive it was saying was 1gb. This was a result of a Dish Hopper reformatting it. Thank you very much. Confirmed this works but do remember you will lose what data you have on it.

  • @jasperjohnaquino2956
    @jasperjohnaquino2956 10 лет назад +3

    Remember:if you are using Windows XP,this method will not work because Windows XP only reads "Flash Drive" as a VOLUME and NOT a DISK like Windows 7 and Vista.
    Try These Method:
    open cmd and type "diskpart".Now type list volume and now you will see your flash drive.(Only for Windows XP{SP}).This is only the Proof that windows xp only reads flash drive as VOLUME.

  • @MirelRC
    @MirelRC 6 лет назад +1

    7 years old video but still helpful. Thank you.

  • @jayarado
    @jayarado 10 лет назад +4

    itype clean then hit enter but there's an error says, "DiskPart has encountered an error: The request could not be performed because of an I/O device error".
    what should i do now Mr. Shaun Calagos??

    • @scalagos0123
      @scalagos0123  10 лет назад

      maybe it's the device itself that has an error. Broken flash drive to be specific. Sorry.
      Or try using another computer.

  • @gcavicchioli93
    @gcavicchioli93 11 лет назад

    Your English has to be improved, but without this video I had no hopes to repair my two corrupted USB devices. Thank you a lot!

  • @SOUPRUN01
    @SOUPRUN01 9 лет назад +13

    When I put clean. It says Diskpart has encountered an error: The system cannot fin the file specified See the systen event log for more information.

  • @russrutter6860
    @russrutter6860 11 лет назад

    well done. This was the only true answer for corrupt thumb drives ive seen. even the hp partition utility was off.

  • @ManojMathur1206
    @ManojMathur1206 9 лет назад +4

    When i do Clean it says : DiskPart has encounterd an error: The request could not be performed because of an I/O Error. See the system Event Log for more info.

    • @scalagos0123
      @scalagos0123  9 лет назад

      Can you try it on another computer?

    • @innocentmolepo4051
      @innocentmolepo4051 9 лет назад +1

      Shaun Calagos I got the same error as him, even on the disk table on the size it shows the right size but on the free it shows 0mb ...I tried it on a different laptop.
      I think the problem started when i was installing windows using a usb method...i did change the drive fro gpt to mbr so that the install can go through but it ddnt went sucssfully but yes i managed to change to mbr and now i cant change back nor the disk management responding.....thnx

    • @ManojMathur1206
      @ManojMathur1206 9 лет назад

      Shaun Calagos no

    • @doomnationalist
      @doomnationalist 9 лет назад

      Manoj Mathur for me it worked without cleaning it

    • @whiterunguard4717
      @whiterunguard4717 6 лет назад

      Vector Graphics getting an error when i try to format it says its too big for fat 32 and when trying ntfs i just get an error please help

  • @viperdemonz-jenkins
    @viperdemonz-jenkins 4 года назад

    been trying to get my flash drive to work for over a year, this fixed it. thank you.

  • @RajaSekharpraveen
    @RajaSekharpraveen 10 лет назад +3

    my disk is not formating it shows 0 % for long time

  • @youssatif2123
    @youssatif2123 8 лет назад

    thanks man, 2016 and you still helping people

  • @ewankosayo5474
    @ewankosayo5474 6 лет назад +3

    DiskPart has encountered an error: Data error (cyclic redundancy check).
    See the System Event Log for more information.
    thats my problem when i type clean nd hit enter
    HELP!!!!

    • @nikobellic7505
      @nikobellic7505 5 лет назад

      everybody's showing same video but nobody's taking attention on this damn

  • @lyon-bondyekratos-radah919
    @lyon-bondyekratos-radah919 4 года назад

    Reading is truly fundamental! I wish I would have read the darn description before following the prompts!!! This is really sadness because all my files are gone. AAAAAHHHHHH!!!!!!!!!!!!!!!!!!!!!!!!

  • @scalagos0123
    @scalagos0123  12 лет назад +3

    i started computing since 2 years old.

  • @mrdredogg
    @mrdredogg 11 лет назад

    thanks it worked perfectly. i thought i was gonna have to replace 2 of my flash drives, but thanks to this video i was able to repair both of them..........

  • @GetVideosFast
    @GetVideosFast 11 лет назад

    Worked for my two 8GB flash drives that had stopped working with my BOSS car dvd player. Thanks much :-)

  • @BertBrummer
    @BertBrummer 11 лет назад

    Very helpful Shaun. Recovered my 32 Gb flash drive 100%
    Just ignore those fools with the rude comments. Obviously they can't read and have never used Dos commands.
    Where are you? Somewhere in SE Asia?

  • @LameCarrot
    @LameCarrot 11 лет назад

    I would like to thank you for saving my new USB drive. Although it didn't recover fully, it is nearly perfect. Thank you so much for help.

  • @MaskedHorror
    @MaskedHorror 11 лет назад

    you my friend are a genius!! the tutorial you posted works for hard disks too! you just save me from spending a serious deal of money, and just saved my 1tb hard drive. For that, I thank you.

  • @RagingHunter7
    @RagingHunter7 11 лет назад

    Jesus dude!!! Your voice makes me wanna dig out my eardrums with a corkscrew!!!! AAAHHHHHHHHHHHHHHHHHHH!!!!!!!!!!!!!!!

  • @zerowerkz000
    @zerowerkz000 10 лет назад +1

    4 thumbs up for this vid! My 16GB Flashdrive that became 4mb is now 16GB again!!! tnx man! \m/

  • @1201201X
    @1201201X 9 лет назад +1

    hope this will solve most of your problems
    C:\> Diskpart
    DISKPART> list disk
    DISKPART> select disk (id)
    DISKPART> online disk (if the disk is not online)
    DISKPART> attributes disk clear readonly
    DISKPART> clean
    DISKPART> convert mbr (or gpt)
    DISKPART> create partition primary
    DISKPART> select part 1
    DISKPART> active (if this is the boot partition)
    DISKPART> format fs=ntfs label=(name) quick
    DISKPART> assign letter (letter)
    DISKPART> list volume
    The following are common errors displayed if you miss a step:
    DISKPART> clean
    DiskPart has encountered an error: The media is write protected.
    See the System Event Log for more information.
    Resolution: run "attributes disk clear readonly" before trying to clean the volume and create the partition.
    DISKPART> convert mbr
    Virtual Disk Service error:
    The specified disk is not convertible. CDROMs and DVDs
    are examples of disks that are not convertable.
    Resolution: clear all data off the disk before converting by running the clean command.
    DISKPART> create partition primary
    Virtual Disk Service error:
    There is not enough usable space for this operation.
    Resolution: run "clean" before trying to create the partition.
    DISKPART> format fs=ntfs quick
    Virtual Disk Service error:
    The volume is not online.
    Resolution: online the disk, create the partition, and convert to mbr before formatting.
    The following are common errors displayed if there is a hardware problem:
    DISKPART> clean
    DiskPart has encountered an error: The device is not ready.
    See the System Event Log for more information.
    Resolution: If the event log entry states "The driver detected a controller error on \Device", the problem is likely your storage controller on your mainboard. Check your hard drive connections and reload your storage conroller driver. If the event log entry states "VDS fails to write boot code on a disk during clean operation. Error code: 80070015@02070008", the hard drive itself has failed.
    The following are common errors you may see if there is a hardware problem:
    DISKPART> clean
    DiskPart has encountered an error: The media is write protected.
    See the System Event Log for more information.
    Resolution: Running "attributes disk clear readonly", as mentioned above, is the first step. Next, the disk is may be locked by an active process, in which case a reboot generally clears the error.

    • @darkseekersgrace
      @darkseekersgrace 9 лет назад

      +bhaskardev dev
      DISKPART> select disk 1
      Disk 1 is now the selected disk.
      DISKPART> clean
      DiskPart has encountered an error: The device is not ready.
      See the System Event Log for more information.
      DISKPART> attributes disk clear readonly
      Disk attributes cleared successfully.
      DISKPART> convert mbr
      Virtual Disk Service error:
      The specified disk is not convertible because the size is less than
      the minimum size required for GPT disks.
      DISKPART> create partition primary
      No usable free extent could be found. It may be that there is insufficient
      free space to create a partition at the specified size and offset. Specify
      different size and offset values or don't specify either to create the
      maximum sized partition. It may be that the disk is partitioned using the MBR di
      sk
      partitioning format and the disk contains either 4 primary partitions, (no
      more partitions may be created), or 3 primary partitions and one extended
      partition, (only logical drives may be created).
      Please help me.

  • @n.sinanakoz1006
    @n.sinanakoz1006 5 лет назад

    I used your video many times and you helped me every time. Thank you

  • @migz5995
    @migz5995 4 года назад

    Galing ni idol.
    Simple explanation.
    Gets ko agad

  • @scalagos0123
    @scalagos0123  11 лет назад

    make sure you type clean first so that it can be a RAW partition. and then you can add partitions.

  • @zoozero3565
    @zoozero3565 10 лет назад +1

    This instruction truly helped me with my sandisk 8gb. thanks dude.

  • @timon2752
    @timon2752 9 лет назад

    You are the man short and to the point loved it. It worked every time I tried it!

  • @mrnoorul
    @mrnoorul 10 лет назад +2

    same error occur ,when i type (clean) nothing happends, i followed step by step, but still nothing, if i skip clean, and go create partition primary,, a long meggage thats says no usable extent could be found..... can u plz help, n previously b4 that i was getting a message saying write protection est...

  • @vornicu1000
    @vornicu1000 12 лет назад +1

    THIS DUDE IS THE BEST!!! THANK YOU BUDDY !!! YOU SAVED MY MP3
    \m/ RESPECT BRO!!!!

  • @deem245
    @deem245 11 лет назад

    Make sure you open CMD prompt in elevated mode i.e. "Run as Administrator". The steps provided are just a way to clean format a drive using DISKPART, however, if the drive has bad sectors it cannot be recovered.
    Cheers,
    Nadz

  • @scalagos0123
    @scalagos0123  11 лет назад

    try to remove write protection. usually there's a switch on your flash drive, but sometimes it's the flash drive that has the problem. if it persists, you might want to check other videos.

  • @Mohsin_Shahh
    @Mohsin_Shahh 4 года назад

    2011 Tutorial still works perfectly ❤
    Thank U for your effort :)

  • @scalagos0123
    @scalagos0123  11 лет назад +1

    Guys, i'll create a new account for youtube this december (on my termbreak) so that i can separate account for youtube and emails. but you can still subscribe here for awhile.

  • @rafmab2700
    @rafmab2700 11 лет назад

    IT WORKS! SALAMAT BRO! YUNG SA IBA,ITS SAID HERE THAT BE CAREFUL WHAT DRIVE YOU SELECT,SOFTWARE LANG REPAIR D2 HINDI HARDWARE

  • @kalaskrille
    @kalaskrille 12 лет назад

    ALLELUIA YOU SAVE MY LIFE!
    Also, cheers, I was just about to throw away the USB flash drive I just now succesfully restored.

  • @silaspraiseascabano3713
    @silaspraiseascabano3713 9 лет назад +2

    Disk part has encountered and error: The semaphore timeout period has expired.
    See the System Event Log for more information.
    please help me how to fix that ..

  • @scalagos0123
    @scalagos0123  11 лет назад

    yeah. HAHA
    i forgot to credit that video because i don't know what's the title of his video.

  • @wichoricardo
    @wichoricardo 7 лет назад

    when I try to create a new partition the following error is showing:
    No usable free extent could be found. It may be that there is insufficient
    free space to create a partition at the specified size and offset. Specify
    different size and offset values or don't specify either to create the
    maximum sized partition. It may be that the disk is partitioned using the MBR disk
    partitioning format and the disk contains either 4 primary partitions, (no
    more partitions may be created), or 3 primary partitions and one extended
    partition, (only logical drives may be created).
    I dont know what to do with that SD

  • @alexm4066
    @alexm4066 7 лет назад

    every time i try to create a partition it says No usable free extent could be found. It may be that there is insufficient
    free space to create a partition at the specified size and offset. Specify
    different size and offset values or don't specify either to create the
    maximum sized partition. It may be that the disk is partitioned using the MBR disk
    partitioning format and the disk contains either 4 primary partitions, (no
    more partitions may be created), or 3 primary partitions and one extended
    partition, (only logical drives may be created)

  • @TheSHJGaming
    @TheSHJGaming 11 лет назад

    The flash drive you are trying to clean has write protect. If you have windows 7, type regedit in the run box, and disable write protect. it's somewhere deep in the registry though. it is in HKEY_LOCAL_MACHINE\SYSTEM\ControlSet001\Control\StorageDevicePolicie and if it isn't there, just right click, select new, then DWORD and call it write protect. then edit it to 0. you should be done.

  • @hard4hunter
    @hard4hunter 11 лет назад

    thank you soo much man i appreciate that you saved my 32 g flash drive

  • @itallack
    @itallack 10 лет назад

    Thanks so much... I had a 4gb stick that would crash my computer every time I plugged it in but now it works... Thanks again!

  • @kamalthagame002
    @kamalthagame002 9 лет назад

    Thanks a lot bro :D !!! I got my pen drive fixed just because of you.

  • @Dintwe100
    @Dintwe100 9 лет назад

    Thanx Shaun, You are the best, I manage to format my flash drive

  • @melody9268-z7d
    @melody9268-z7d 3 года назад

    Lods.. Dami ko na pinanuod na vid.. Ito lang pala ang sagot.. Salamat💝

  • @MrCondrei
    @MrCondrei 11 лет назад

    Tried several application but to no avail. Thank you so much!

  • @itsayumeold
    @itsayumeold 6 лет назад

    dude this actually worked but my pd was not getting formated by this but after clicking exit i just did simple formating and that jus worked thanks a lot

  • @whiskeyify
    @whiskeyify 11 лет назад

    just be sure to select the right drive or you could end up messing up your hard drive. In this case it was drive one, the smaller of the two hard drives.

  • @MadeOfBlue
    @MadeOfBlue 11 лет назад

    Shaun Calagos you saved my life! Thank you!

  • @curtisr57
    @curtisr57 11 лет назад

    Worked like a charm, Shaun. Thanks very much!

  • @bhanuchandar8373
    @bhanuchandar8373 9 лет назад +1

    This is very use full. Thanks for uploading this video.

  • @mjk641
    @mjk641 11 лет назад

    Dude , you rock , it worked perfectly on my flash drive , thank you very much !

  • @scalagos0123
    @scalagos0123  11 лет назад +1

    Another thing. DON'T GET MY VIDEO, UNLESS I HAVE THE PERMISSION TO ALLOW YOU.

  • @AmanKumar-sm2gi
    @AmanKumar-sm2gi 9 лет назад +4

    in my case it shows me
    DISKPART> clean
    Virtual disk service error:
    There is no media in the device.
    DISKPART>
    help me

  • @juvilita00
    @juvilita00 11 лет назад

    Thank you so much Mr. Shaun, You saved me and my flash drive :)

  • @yimrahman
    @yimrahman 6 лет назад

    It works on my corrupted flash. Thanks a lot!

  • @Harharf
    @Harharf 12 лет назад

    just keep formatting it the normal way but with different formats
    worked for me
    like if it worked for you so people will see

  • @columnmn
    @columnmn 10 лет назад

    You just saved my USB. Thanks!

  • @lochanpokharel
    @lochanpokharel 8 лет назад +1

    it take lots of time
    this is fastest method
    see
    open cmd run as admins...
    type this
    diskpart
    selectdisk 1 (put only one usb drive)
    clean
    creat partition primary
    active
    select partition 1
    format fs=fat32 quick

  • @jhicksaturn533
    @jhicksaturn533 10 лет назад +1

    Galing mo tlga Shaun!

  • @scalagos0123
    @scalagos0123  11 лет назад

    select partition 1, because your flash disk only contains 1 partition. unless i'm wrong. :)

  • @NorgeSantana
    @NorgeSantana 12 лет назад

    Thank you!! Worked and saved my 8gb and 16gb usb drives!

  • @gta5onlineshorts
    @gta5onlineshorts 11 лет назад

    Problem:
    DISKPART> clean
    DiskPart has encountered an error: The semaphore timeout period has expired.
    See the System Event Log for more information.
    DISKPART> attrib disk
    Current Read-only State : No
    Read-only : No
    Boot Disk : No
    Pagefile Disk : No
    Hibernation File Disk : No
    Crashdump Disk : No
    Clustered Disk : No
    DISKPART> clean
    DiskPart has encountered an error: The semaphore timeout period has expired.
    See the System Event Log for more information.
    Do you have any solution?

  • @dombengi
    @dombengi 11 лет назад

    dude i was about to throw 2 8gig drives in the trash.
    you are the man

  • @scalagos0123
    @scalagos0123  11 лет назад

    read the description bro. this is the other method of formatting flash disks, and repairing.

  • @SonicHacki
    @SonicHacki 10 лет назад

    Thanks so much for the tutorial, I have a 4 GB drive that was corrupted few months ago.

  • @TheIshan3
    @TheIshan3 12 лет назад

    it says diskpart encountered an error. the device is not ready. See system event log for more information

  • @mukeshshrestha9245
    @mukeshshrestha9245 8 лет назад

    i couldnt create partition
    DISKPART> create partition primary
    This occurred:
    No usable free extent could be found. It may be that there is insufficient
    free space to create a partition at the specified size and offset. Specify
    different size and offset values or don't specify either to create the
    maximum sized partition. It may be that the disk is partitioned using the MBR disk
    partitioning format and the disk contains either 4 primary partitions, (no
    more partitions may be created), or 3 primary partitions and one extended
    partition, (only logical drives may be created).

  • @miyumeist
    @miyumeist 3 года назад

    hi when i type clean in the cmd it only says "diskpart has encountered an error: the request could not be performed because of an I/Odevice error. see the system event log for more information" what do i do 😢

  • @yasmojo2279
    @yasmojo2279 10 лет назад +1

    when i type (clean) nothing happends, i followed step by step, but still nothing, if i skip clean, and go create partition primary,, a long meggage thats says no usable extent could be found..... can u plz help, n previously b4 that i was getting a message saying write protection est... which it nt the case, it a new sd 32gb, any ideas

  • @scalagos0123
    @scalagos0123  11 лет назад

    GUYS, PLEASE READ.
    If you've follow these steps and you didn't succeed, can you try it on another computer? If it doesn't work on another computer, comment here and, if I can do it in my free time, reply to your comments.

  • @scalagos0123
    @scalagos0123  11 лет назад

    For those who are having problems on not showing "disk 1," reinsert the drive, wait for 20 seconds, and type list disk again. :)

  • @PhilosophyofRace
    @PhilosophyofRace 11 лет назад

    Would you recommend that I follow the directions in your video if my USB flash drive is having the following problem: It was corrupted the first time I used it. I bought a 64GB usb drive and I tried to transfer all my music (34GB) to it. It transferred the folders, but for some reason the music files in some of the folders never transfer. This happens no matter how many times I try it. I tried formatting the USB by right clicking it on my computer and running a full format. So, any suggestions?

  • @manny349_0
    @manny349_0 11 лет назад

    I heard a rooster lol 0:23

  • @rommelites
    @rommelites 11 лет назад

    it not works for me. i have a 16gb cd r king usb flash drive and it is right protected. zero available space in cmd prompt and 15gb is used. the question is, how can i format this thing that my computer says: No usable free extent could be found.It may be that there is insufficient free space to create a partition at the specified size and offset.
    Please help me regarding this.

  • @scalagos0123
    @scalagos0123  11 лет назад

    Bale Folder Options (Organize > Folder and Search Options), navigate ka sa view, then uncheck mo ung hide protected system files and click mo ung radio (show all hidden files and folders) try mo kung andun.
    Friendly advice: Panget AVG. I suggest switch to MSE. hndi ako vinirusan sa antivirus na un (di ko na cya gmet dhl naka-8 ako and ung antivirus dun is more like MSE UI and wala nakong ginagamit na antivirus dito sa 8). or avast! maganda dn. nag-switch lang ako dhl wala nang sandbox sa free.

  • @MrRohitjain87
    @MrRohitjain87 11 лет назад

    thanks dear.i have 4 gb pen drive.it had got 4gb to 2 mb. and i watched your video after that problem is solve

  • @RH3D
    @RH3D 12 лет назад

    LOL @ the chickens in the background

  • @anthonypacis6357
    @anthonypacis6357 Год назад

    Visual Disk Service error:
    The media is write protected. any of these tutorial none of them works on my USB why? please help me fix this

  • @antoniuille1242
    @antoniuille1242 8 лет назад +1

    What can i do if my disks status is "no media"? Please help me

  • @arczi7780
    @arczi7780 8 лет назад

    and what if the flashdrive is corrupted AND write protected .....the "attributes disk clear readonly" does not work :

  • @scalagos0123
    @scalagos0123  11 лет назад +1

    you do realize that there's a description box.

  • @viniciusmrodo
    @viniciusmrodo 12 лет назад

    Hey man! Thank you a lot. I had a 4gb flash drive only showing me 200mb.. And that solved the problem at all..
    thanks.

  • @desireepaahana387
    @desireepaahana387 7 лет назад

    Error:
    DISKPART> create partition primary
    Virtual Disk Service error:
    The operation is not supported on a non-empty removable disk.

  • @KofiAsare0
    @KofiAsare0 8 лет назад

    You saved me two times.

  • @scalagos0123
    @scalagos0123  11 лет назад

    be sure also that it's unlocked. meaning, make sure the drive is in non-write protection.

  • @ktgireesh
    @ktgireesh 9 лет назад

    While executing clean command after selecting usb,i am getting below error.
    "virtual disk service error there is no media in the device".
    Please help me

  • @danhan1072
    @danhan1072 11 лет назад

    My USB problem is that it will not show up in anything. when I typed "clean", it said there was no media in the disk. I already knew that because it worked before and once I did a full format on it, it just never showed up again after that. Do you know what the problem is?

  • @bexs-nc8rj
    @bexs-nc8rj 8 лет назад

    i tried it and got a message - diskpart has encounted an error: an attempt was made to move the file pointer before the beginnig of the file - see the system event log for more

  • @techzaada
    @techzaada 12 лет назад

    hi im turkman cena
    i have a usb flash wich was 8 GB few days ago but now it became 2 GB its really annoying. could you please tell me what happend to my flash. and how can i get back to my 8 GB flash

    • @althafsulthan1900
      @althafsulthan1900 6 лет назад

      just use hp disk format utility, actually its just like there are 2 partitions now in ur usb but ; windows just recognises the 1st partition and its 2gb ; hp disk utility helps to merge those 2

  • @r6ast
    @r6ast 11 лет назад

    you do realize i don't care about the desc i care about the title.the title says NOTHING about formating it.

  • @justineumali5755
    @justineumali5755 10 лет назад

    SALAMAT PO! SALAMAT PO NG MARAMI! WAHAHAHAHAHAHA
    KAYO NA PO MAGALING! WOOOHOOOO

  • @shiryu358
    @shiryu358 11 лет назад

    tol marami talagang salamat dito working talaga sya !

  • @GigglingChinchilla
    @GigglingChinchilla 12 лет назад

    If I do this, the existing files will be erased, right?
    Because my MemoryCard must be formatted before I can use it, well, that's what Windows says.

  • @TheMfr17
    @TheMfr17 11 лет назад

    It doesn't work for me because when I put "clean" it says "Error Virtual Disk Service there is no media in the device" help me please Shaun

  • @Brent12346
    @Brent12346 11 лет назад

    it said there is no media on the disk. The flash drive also, wont get picked up by the computer, the red light flashes, then stays on.

  • @MrKennethJay
    @MrKennethJay 12 лет назад

    May Manok na Tumahol sa 1:10 :)) hahaha katayin mo na yan pre!

  • @JhiyenBelen
    @JhiyenBelen 10 лет назад +1

    Pagktpos ko syang . Àyaw magclean.. pano yun? Kasi nagkukusang magconnect at disconnect yung sd card kapag icclean not connected tas kapag uulitin ko na nMan connected n ulit hays ang hrap.. help pls

  • @teiquanphillip5319
    @teiquanphillip5319 8 лет назад

    it deleted everything on my flash drive ...that I recently put on there today and says folder is empty. ..idk what to do I need these files they're very very important and I need them asap