+First Name Last Name would hate for the winner to break it first round. working out the kinks let's him create content and make it better at the same time.
Sweet. I can make those dual caliper brackets at work. I work at a machine shop in Orlando and I'm a CNC programmer. If you need anything that breaks or maybe you want me to duplicate so you can save money hit me up... Reply to me here and I can give you more info. Would be cool to make parts for u and engrave your logo on it
Hey Adam, look after some chineese Android dual din radio, they use the top din emplacement and leave the second one nerly empty but the front screen is a full dual din size. Look at the dynavin and things like that for the e46. It's always the same electronics but with different front end to fit in each car. That would give you a lot of clearance for the cylinder reservoir.
Almost 2mil subs that’s crazy!!!! My girl and I have been following you and Nicole for a long time now! You guys are by far our favorite RUclips couple!! 🍻
I hope you are looking at refurbishing up all the interior trim before handing it over it looks like a bear's scratching post at 11:13. a little paint and Hydro dip the plastics would go a long way to giving them a new lease of life.
You could've put an offset on the pull lever maybe use the vice that you have to bend it and it looks like aluminum that will bend easy that way you can mount the base straight versus slanted or pointing towards the driver
Just a psa for anyone with CV axles...dont tighten with an impact or over tighten. Find out the torque spec. Too tight can cause hub assemblies, wheel bearings, axles and diff parts to go out alot sooner than normal. Parts usually have torque specs for a reason. The z looks awesome. Hopefully we get to see the cream and black z sliding together. Btw you should paint the black Z the 240s engine bay color. That would look hot with gold wheels
Adam there is a special tool for the handbrake assembly spring clips and trust me it saved your sanity using it I am sure you can get one from most tool shops ai don't know the name of it but they will know what you want. Your knowledge of car repair modifying has come on loads in a couple of months, and that brake line work was better than I have seen a garage do.
Yes you can push the piston back like that but don't push them all the way as you can invert the seals. Leave them out very slightly and you will be golden
Most weirdest thing that just happened Adam when u where trying to get the bolt undone an add popped up saying u need help we’ll slater&Gordon will help haha perfect timing right there
with the brakes to push the piston back leave the pad in then use a C clamp to push it back on a single piston can use the same process with a multi piston caliper but use 2 c clamps
Maybe for the radio instead of a single DIN you could get an android disk less double since they are usually very shallow. Then you wouldn't have dead space, it would look good, and since you have the stock ECU you can use the Torque app with an OBDII Bluetooth adapter and add gauges without having to hack up the dash. Might be a clean solution and the are pretty reasonably priced.
That hydro master looks like it would be a royal P.I.T.A. to fill. The install may be cleaner with it tucked up into the dash. But it sure looks like it makes servicing it miserable. I like to make stuff as easy to work on as possible. Even if that means the looks suffer a little. On the calipers I usually use a old inner pad and a C-clamp to press the piston into the caliper. Using the pad pushes the piston in even. It work great unless the pistons are the kind that thread in.
I haven’t added fluid or had to service the master on my s13 once in the past two years. It’s fine so long as there are no leaks, and the radio/trim takes about 2 min to remove anyway. All clips
Super stoked to see the final set up for the hydro! I was wondering as we get closer to the date where you pick the winner how will you do it? Just an idea but it would be cool to see a live feed on RUclips of you picking the winner out of a hat or something.
Loving the new outro song an that slow mo clip keep it up. An can’t wait to get a Z I have been saving up an getting close to be able to buy a fairly clean one now have to hunt one down that’s in my budget 😁
im looking to buy something for the givaway, its 19.99 does that count for 2 entries because after sales tax and shipping it will be over $20, or will it only be one entry as the actual item is under 20
Is there any way possible you could run the lines for the hydro with out taking off the drive shaft? If so could you explain it in the next video? I really want to do a dual caliper set up and see videos and people always take out the drive shaft and being that I don't have a lift it would be a pain. Thanks !
ADAM there are 7" android units that are really shallow i think you would have room for one and they are cheap AF on ebay.. then you can add a obd2 bluetooth adapter for 10$ and they can use torque ;)
is the cosmic wheels and bc coilovers, also only us giveaway or is it global? and btw you really inspire me and get me to push harder on my goals in life! Have a Great day Adam :-)
Hey just wanted to let you know I know you have a some harbor freight tools but I also know you go to parts stores fairly often so I'd really recommend looking into the Carlyle tools by Napa and also some of the Duralast tools from AutoZone I find them to be overall nicer quality then harbor freight Pittsburgh pro tools
3, 2, 1 Into the stars... To buy candy bars... He's the kid with a knack for inventions... he's got a superpowered mind... A mechanical canine... He rescues the day from sure destruction... This is the theme for Jimmy Neutron!
Justin LaBarge yes but the cable pulls the lever on the calliper which pushes fluid so the piston moves to clamp on the disk. Where as the internal drum style parking brake is all mechanical
Satveer Degun No, it is still mechanical, the cable is attached to a cam inside the caliper. Hence why you need to wind the pistons back in when doing pads on these setups, usually with a janky tool from the auto parts store.
It’s sick that you are testing the giveaway car and giving it what it needs so it’s a ready made car for the winner!
I agree. Some people say he should not beat on it but the haters will always find something to hate on.
I agree with you both I would rather a class A drifter work out all the kinks in a car first.
+First Name Last Name would hate for the winner to break it first round. working out the kinks let's him create content and make it better at the same time.
Yes it's being built for me. Lol
WHHHATT... ADAM CHANGED THE OUTRO SONG... WTF DAWN OF A NEW ERA!!!
NissanPacific kinda dig it tbh
yeah its totally rad! Ryan Little - Fractures (you can find it on soundcloud)
Fred Smith what was the old one called
@raymond macias its called Golden Brown by The Guru
I KNOW IM SO SAD
Sweet. I can make those dual caliper brackets at work. I work at a machine shop in Orlando and I'm a CNC programmer. If you need anything that breaks or maybe you want me to duplicate so you can save money hit me up... Reply to me here and I can give you more info. Would be cool to make parts for u and engrave your logo on it
It'd be sick to have his logo engraved on some parts. I'd definitely take you up on that offer if I was Adam :P
Only replying so that adam sees.
MG_Anon Lol thanks
Adam......
Paint Correction Officer #project make sure adam see this
great install vid bro. pretty soon you will be opening your own shop. Thats going to be one lucky person that wins that Z.
Hey Adam, look after some chineese Android dual din radio, they use the top din emplacement and leave the second one nerly empty but the front screen is a full dual din size. Look at the dynavin and things like that for the e46. It's always the same electronics but with different front end to fit in each car. That would give you a lot of clearance for the cylinder reservoir.
Almost 2mil subs that’s crazy!!!! My girl and I have been following you and Nicole for a long time now! You guys are by far our favorite RUclips couple!! 🍻
Will you install a short throw shifter in the giveaway Z??
Spain I think it already has one
For the caliper, to push the piston back in, just use an old brake pad and a giant C-clamp. Works great every time :)
This is awesome... the lucky person to win this machine will have loads of fun. Add one are just a bonus.
I hope you are looking at refurbishing up all the interior trim before handing it over it looks like a bear's scratching post at 11:13. a little paint and Hydro dip the plastics would go a long way to giving them a new lease of life.
You could've put an offset on the pull lever maybe use the vice that you have to bend it and it looks like aluminum that will bend easy that way you can mount the base straight versus slanted or pointing towards the driver
Just a psa for anyone with CV axles...dont tighten with an impact or over tighten. Find out the torque spec. Too tight can cause hub assemblies, wheel bearings, axles and diff parts to go out alot sooner than normal. Parts usually have torque specs for a reason. The z looks awesome. Hopefully we get to see the cream and black z sliding together. Btw you should paint the black Z the 240s engine bay color. That would look hot with gold wheels
Update on 2jz
jay vargas they're working on Kevin Lawrence's car. He's a pro driver and his car is way more important
Adam there is a special tool for the handbrake assembly spring clips and trust me it saved your sanity using it I am sure you can get one from most tool shops ai don't know the name of it but they will know what you want. Your knowledge of car repair modifying has come on loads in a couple of months, and that brake line work was better than I have seen a garage do.
Formula 1Fan scribe tool i think
You should make a poster of you all 3 of you drifting and/or when you have you Z ready to drift aswell.Thanks for the awesome videos by the way.
Woow. The giveaway Z is getting better and better! Keep up the great work. Dutch regards.
All of you need clean blue z’s, tandems would look sick
It’s crazy I remember watching this video when I was 15 😂 you’ve came a long way Adam one day we will drift together
Yes you can push the piston back like that but don't push them all the way as you can invert the seals. Leave them out very slightly and you will be golden
U can use a C-clamp and the brake pads to push the piston into the caliper Adam
Been waiting at the docks for weeks mate i want me prize bloody getting cold out here that thing better have a nice working heater ay
US only pal
Murica*
Clutch Kick Junkies i will laugh so hard if you actually WIN good luck dude im in Montana so i need so nice working heater too
I'm in Orlando the next few days for vacation! Just remembered you live here as I was watching the video lol
Most weirdest thing that just happened Adam when u where trying to get the bolt undone an add popped up saying u need help we’ll slater&Gordon will help haha perfect timing right there
That last Clip ! You should make a Poster out of that with the sign from the 3 of you ! :D I would 100% buy that.
Hmmm I like the position of the hydro but how you fill it up and check to level if it's low? Wouldn't you have to take out the radio everytime.
March 20th is so close!!!!!
Almost 2M subscribes! Congrats Adam!!🙏🏼👍🏼
with the brakes to push the piston back leave the pad in then use a C clamp to push it back on a single piston
can use the same process with a multi piston caliper but use 2 c clamps
I hope you kept the white atmosphere control box in there cause if it’s not hooked up, no more heat or AC.
I love your Dragonball Z hairstyle, I'm waiting for it turn blonde when a bolt won't back out
Bro dropped the washer 2:03
vishal deonandan well we all know it's gone forever. Everything you drop disappears.
I saw that lmfao he never noticed. Watch it leak now because of that.
I almost bent over to pick it up but realized I was watching a video
Lmaooo
vishal deonandan i thought i wad tje only one that saw that ;)
It looks like you are scared of the grinder. Get the harbor freight special and use that with good wheels and its great
Adam just try a carpenters G Clamp on those brake callipers, done me for 45 years. Good luck great work.☺
Maybe for the radio instead of a single DIN you could get an android disk less double since they are usually very shallow. Then you wouldn't have dead space, it would look good, and since you have the stock ECU you can use the Torque app with an OBDII Bluetooth adapter and add gauges without having to hack up the dash. Might be a clean solution and the are pretty reasonably priced.
You actually can fit a double din you just have to look for a model that has the backend size of a single din radio
That hydro master looks like it would be a royal P.I.T.A. to fill. The install may be cleaner with it tucked up into the dash. But it sure looks like it makes servicing it miserable. I like to make stuff as easy to work on as possible. Even if that means the looks suffer a little.
On the calipers I usually use a old inner pad and a C-clamp to press the piston into the caliper. Using the pad pushes the piston in even. It work great unless the pistons are the kind that thread in.
I haven’t added fluid or had to service the master on my s13 once in the past two years. It’s fine so long as there are no leaks, and the radio/trim takes about 2 min to remove anyway. All clips
Adam:” who you calling pin head”
Patrick star reference 😂
that e-brake looks like a steak knife...
I can't unsee this
Super stoked to see the final set up for the hydro! I was wondering as we get closer to the date where you pick the winner how will you do it? Just an idea but it would be cool to see a live feed on RUclips of you picking the winner out of a hat or something.
Loving the new outro song an that slow mo clip keep it up. An can’t wait to get a Z I have been saving up an getting close to be able to buy a fairly clean one now have to hunt one down that’s in my budget 😁
im looking to buy something for the givaway, its 19.99 does that count for 2 entries because after sales tax and shipping it will be over $20, or will it only be one entry as the actual item is under 20
Avery Filbert from my experience it's just one, has to be $20 before tax
One Uno ill just add some stickers or something then thanks
Do you have a jet tag? I recommend one. Makes finding your keys a lot easier sometimes and I think they're 12 so you'd have 3 entries
Adam, do you know when the No Sleep Tees will be restocked? Hoping to get one before the giveaway deadline
There are several android radios that are only like 3 in deep that you could use. Also not crazy about handbreak placement.
When your hair is so tall you have to duck going through doorways
Is there any way possible you could run the lines for the hydro with out taking off the drive shaft? If so could you explain it in the next video? I really want to do a dual caliper set up and see videos and people always take out the drive shaft and being that I don't have a lift it would be a pain. Thanks !
The ending clip with the music was sick!
Lol "One day build" Adam you crack me up😂😂😂
Damn... Never ever in my life clicked a notification that fast
same
Marian Vlioncu you have to tell your mom about it 😩
@adamlz do you still plan to get back row of garage lighting working? would help when working on the rear of cars
There's a wee tool for the springs on the handbrake bro!
Will you ship the wheels and coilovers world wide or not
ADAM there are 7" android units that are really shallow i think you would have room for one and they are cheap AF on ebay.. then you can add a obd2 bluetooth adapter for 10$ and they can use torque ;)
Thank you Adam for saving us all from having to watch TJ’s content 🙏🏻
is the cosmic wheels and bc coilovers, also only us giveaway or is it global? and btw you really inspire me and get me to push harder on my goals in life! Have a Great day Adam :-)
Hey just wanted to let you know I know you have a some harbor freight tools but I also know you go to parts stores fairly often so I'd really recommend looking into the Carlyle tools by Napa and also some of the Duralast tools from AutoZone I find them to be overall nicer quality then harbor freight Pittsburgh pro tools
Adam, you need to say "Brain Blast" every time you have a good idea and ur hair is Jimmy neutron
Adam what are you gonna do when the Z becomes the basher car and the s15 becomes the racecar? S13 seems redundant
Can't wait to see who will win this thing. Really nice car Adam
Do you need to put the parking brake stuff back in as i will be removing stock handbrake Handel and cables
You should get wisefab front and rear for your own drift z.
Should drive the car at a event and tell us your coolant temp after each run . Could help us vq drivers wanting to drift our cars at event !
Difficult watching sparks going over that beautiful purple paint haha
Dual calipers are cool and all but who's behind the camera?
Might be a dumb question but can you just delete the stock handbrake with this setup?
7:53 Rockstar background
Another stellar video man glad to see you doing your own work and learning 👍🏻👍🏻 for the z.
lol when it comes to changing break pads on my ford falcon i use a gclamp and an dead break pad to push my pistons back
3, 2, 1
Into the stars... To buy candy bars... He's the kid with a knack for inventions... he's got a superpowered mind... A mechanical canine... He rescues the day from sure destruction... This is the theme for Jimmy Neutron!
My parking brake just uses the stock caliper. Why do your cars use drums, Is it a Japanese thing or just a cost savings?
It's a old tech but a fail safe if the hydro fails.
Satveer Degun mine is still a cable though...
Justin LaBarge yes but the cable pulls the lever on the calliper which pushes fluid so the piston moves to clamp on the disk.
Where as the internal drum style parking brake is all mechanical
Satveer Degun No, it is still mechanical, the cable is attached to a cam inside the caliper. Hence why you need to wind the pistons back in when doing pads on these setups, usually with a janky tool from the auto parts store.
I feel a “look at that!” shirt coming out. Hahahaha
Wish I had a drift car to need this for.
i love the new outro although i do miss the old song u had but this is a nice change!!!
you know what it just hit me your building a car to give it away you cant do anything els but rock your awesome dude
if you pick up a double din with out a cd player you can get shallow ones ;)
paint the trim. z's interiors are always jacked.
Adam making the money back spent on the Z giveaway ten fold from these episodes
Adams got that 2005 elementary school hair 😂😂
can you please tell me why you are working with the car way higher then you need it to be. its not the first time i have noticed
Will this fit my Stagea?
Will It fit on my Honda? Moog dixit 😂😂
But will it fit my Honda 🤔
i love that slow mo outro clip! any more of that uploaded?
Where did you get the dark blue 350. I'm located in Orlando
A new outro song,but the Z looks great👍 Keep up the great content!
*rip washer* 2:03
Are you going to the Michelin Pilot Experience???
The outro is so sick! It would be some work but do you think you could make a drift edit with clips like your outro???
Adam can you put the setup of ur 240sx in the description in the next video because I’d love to replicate some things thst I reckon u did amazing at
so does your car have drum brakes or disk brakes in the rear????
dude use a c-clamp and old brake pad to compress the caliber that way you don't have to pull the brake line off and put it in the vice
The end scene/ Outro is was awesome
Hey man I've driven past you so many times on my way to rehearsal each weekend, maybe one day I'll get the chance to meet you
RIP old outro songgggg😭😭😭
(I dig this new outro tho🤘)
I live in hunters creek i love youu
That new outro is fire !!
I don't know how everybody else feels but I feel like the giveaway Z needs a wing of some sort I think it would look much nicer
Are you going to restock the store before the giveaway ends?
Props awn the new outro song much better twas time for a change adam boi 👍🏻🐾👏🏻👏🏻👏🏻🇬🇧
damnnn new outro is definitely 🔥🔥 ,, but that OG outro song will be missed 💔
How do you not have a single c clamp? I have like 10 of them.
When’s the next meet up?
I like these new ending clips 👌