That grease mod is crazy! I have a cheap Amazon DA thats annoyingly loud, but otherwise a decent polisher. I was going to upgrade to something less noisy, but will definitely try the grease mod first! Looking forward to that video.
Ha ha, that's funny, but at least she's pro-active. You'll LOVE the class, it's 100% hands-on and you'll get to train on the coolest cars and the worst condition boats. You'll also have the opportunity to test out the largest selection of different polishers from the most expensive to the least expensive like you see in this video. See you in February -Mike Phillips
Be sure to have plenty of buffing pads, it takes more than a single pad to buff out a car. Also, always choose products that use great abrasive technology. Thanks for watching and commenting. -Mike Phillips
I have a 1996 Buick that scratches on paint looks like it was caused by shrubs or bushes. Can these scratches be corrected without wet sanding? Or at least made less noticeable?
The answer is "yes". If the scratches are not too deep, you may be able to remove them 100% - If they are too deep to remove safely, machine polishing will dramatically improve them. Hard to believe, but you car is almost 30 years old! I think it qualifies for antique status? Thanks for watching and commenting. -Mike Phillips
Yes, it's possible, if the paint isn't too hard. It might work on the flat areas but anytime you need to buff scratches out around edges, raised body lines or curved panels the pad is simply going to stall out and you'll be standing there doing nothing. Just get a rotary polisher at Harbor Freight and a couple of HF wool pads and get it over with. Then use the Harbor Freight 6" DA polisher to remove the holograms the rotary with a wool pad leaves behind. Thanks for watching and commenting. -Mike Phillps
@mikephillipsrealworlddetailing k thanks ya I'm really just honestly a rotory guy I'm going to check on a torq r that is on a cyber Monday deal they have it priced at $154 just use it until I csn step up to a flex rotory
These types of tools will always have some level of vibration as do most orbital polishers - it's the nature of the beast. I can't say I notice any difference in vibration using the factory 6" backing plate versus the non-factory 5" backing plate. Plus remember - you're going to attach a pad; this can cause vibration. As the pad becomes wet with product, this can cause vibration. At the end of the day, if you're going to use a tool like this to do all the paint correction to a car, the size of the backing plate and any vibration it may or may not cause will be the least of your concerns. A quality backing plate for this tool is made by Lake Country Manufacturing, they've been making these for decades and they are uniform in construction and balance. Buff and Shine Pads also offers a similar, high-quality 5" backing plate. If vibration is a concern, I would avoid no-name, cheap backing plates off Amazon. It might be balanced, but it might not be balanced. Thank you for watching and commenting. -Mike Phillips
A quality backing plate for this tool is made by Lake Country Manufacturing, they've been making these for decades and they are uniform in construction and balance. Buff and Shine Pads also offers a similar, high-quality 5" backing plate. If vibration is a concern, I would avoid no-name, cheap backing plates off Amazon. It might be balanced, but it might not be balanced. Thank you for watching and commenting. -Mike Phillips
@@mikephillipsrealworlddetailing Thank you for the info... getting ready to dip my toe into the polishing world (as a weekend warrior). Lot of awesome info found here.
Funny I bought the Bauer model as a beginner, used it on several cars. Then 2 years later felt comfortable enough and applied Dr Beasleys Nano MX. still looks great btw.
@MikePhillips-Dr.Beasleys Can you recommend what I should use for my pickup truck. A 2020 F150 Black color, on the hood it has like water spots even after waxing by hand. I don't have a power polisher. Thanks Bill
@@billmason7411 - Hi Bill. The reality is, with modern clearcoats it's pretty hard to do any type of paint correction by hand. I teach hand polishing techniques in my classes, but it's mostly for tight, small or intricate areas where it's difficult to get a spinning buffing pad. The tool I show in this video is pretty simple and easy to use, even for a first-timer. Plus, before buffing out the hood of your truck, you could practice on the wife's or girlfriend's car. LOL Besides that, a non-cleaning or non-abrasive wax isn't going to remove water spots. At a minimum you'll need what's called a Cleaner/Wax or AIO - AIO stands for All-in-One. This is a wax that contains some type of abrasive technology and this type of wax will remove swirls and water spots, polish the paint to a high gloss and leave some form of protection behind. In the Dr. Beasley's line, we have NSP Z1 - which is a one-step ceramic AIO. Hope that helps.. Mike
@mikephillipsrealworlddetailing Ok, I'll get a buffer and the Z1. I see you recommend 5" pads. Please give a recommend pad to use with the Z1. I appreciate it. Bill
Just picked this one up last week for 35$ please do so with showing us that grease mod! Looking to detail my truck with this piece and some 3D compound ..
Which backing plate they have that harbor freight one on sale today for 35 bucks I wanna buy it and upgrade plate idk which one to buy tho I never polished
I have never seen a 5" DA backing plate at Harbor Freight. If this is what you're looking for, you'll need to shop online. Thanks for watching and commenting. -Mike Phillips
![Noob To Max With DRAGON REWORK In Blox Fruits [FULL MOVIE]](http://i.ytimg.com/vi/LnBMOinoOvA/mqdefault.jpg)
These polishers are on sale this week for $35
just got one!
Can't find the sale. Can you share the coupon code. ...or maybe just ended. Thanks
@@markymark9835 - If the sale has ended, just wait a few weeks, the sale will be back.
Thanks for watching and commenting. -Mike Philips
@@markymark9835not sure if you're still looking, but all Bauer and Hercules corded polishers are 40% off Sept 13-15 - 45% if you are Inside Track.
Great detailed review of the product and plenty of tips and tricks
Thank you for watching and commenting. -Mike Phillips
Very good tutorial on the Bauer polisher. I will look into the grease change . Thanks for sharing !
Thank you for watching and commenting. -Mike Phillips
I'm starting to get into polishing and I've learned more about this process from this on video than the multiple other videos I've seen - THANK YOU!!!
Thanks for watching and commenting, more vids to come. -Mike Phillips
Excellent presentation once again!
Thank you for watching and commenting. -Mike Phillips
That grease mod is crazy! I have a cheap Amazon DA thats annoyingly loud, but otherwise a decent polisher. I was going to upgrade to something less noisy, but will definitely try the grease mod first! Looking forward to that video.
Thanks for watching and commenting. -Mike Phillips
Great tutorial. We spoke Saturday morning. Can't wait to take your class in Febuary the wife already packing her suitecase 😂
Ha ha, that's funny, but at least she's pro-active. You'll LOVE the class, it's 100% hands-on and you'll get to train on the coolest cars and the worst condition boats.
You'll also have the opportunity to test out the largest selection of different polishers from the most expensive to the least expensive like you see in this video.
See you in February -Mike Phillips
Great video very straightforward
Thanks for the kind words. -Mike Phillips
wow, what a thorough review. I like his coverage!
Thanks for the kind words, especially considering there are so many others teaching car and boat detailing on RUclips.
-Mike Phillips
I've been looking for a used machine but these just went on sale. My daughter's new car needs some love so I'm excited.
Be sure to have plenty of buffing pads, it takes more than a single pad to buff out a car. Also, always choose products that use great abrasive technology.
Thanks for watching and commenting. -Mike Phillips
I own this polished and haven't used it yet. Great video! Thanks
Thanks for watching and commenting. -Mike Phillips
A great start up machine, microfiber thin pad...good compound.
Nicely Done! Very Nicely Done!!!
Thanks for watching and commenting. -Mike Phillips
I have a 1996 Buick that scratches on paint looks like it was caused by shrubs or bushes. Can these scratches be corrected without wet sanding? Or at least made less noticeable?
The answer is "yes". If the scratches are not too deep, you may be able to remove them 100% - If they are too deep to remove safely, machine polishing will dramatically improve them. Hard to believe, but you car is almost 30 years old! I think it qualifies for antique status?
Thanks for watching and commenting. -Mike Phillips
Very helpful video. Thank you.
Thank you for watching and commenting. -Mike Phillips
What is this class I’m reading about?
Can you remove 1,500-2,000 scratches with that unit if needed?
Yes, it's possible, if the paint isn't too hard. It might work on the flat areas but anytime you need to buff scratches out around edges, raised body lines or curved panels the pad is simply going to stall out and you'll be standing there doing nothing. Just get a rotary polisher at Harbor Freight and a couple of HF wool pads and get it over with. Then use the Harbor Freight 6" DA polisher to remove the holograms the rotary with a wool pad leaves behind.
Thanks for watching and commenting. -Mike Phillps
@mikephillipsrealworlddetailing k thanks ya I'm really just honestly a rotory guy I'm going to check on a torq r that is on a cyber Monday deal they have it priced at $154 just use it until I csn step up to a flex rotory
Any recommendations on which 5in backing plates work well for this model? I heard that the smaller backing plates can throw it out of balance.
These types of tools will always have some level of vibration as do most orbital polishers - it's the nature of the beast. I can't say I notice any difference in vibration using the factory 6" backing plate versus the non-factory 5" backing plate.
Plus remember - you're going to attach a pad; this can cause vibration. As the pad becomes wet with product, this can cause vibration. At the end of the day, if you're going to use a tool like this to do all the paint correction to a car, the size of the backing plate and any vibration it may or may not cause will be the least of your concerns.
A quality backing plate for this tool is made by Lake Country Manufacturing, they've been making these for decades and they are uniform in construction and balance. Buff and Shine Pads also offers a similar, high-quality 5" backing plate.
If vibration is a concern, I would avoid no-name, cheap backing plates off Amazon. It might be balanced, but it might not be balanced.
Thank you for watching and commenting. -Mike Phillips
@@mikephillipsrealworlddetailing thank you Mike for the detailed reply there. I will be placing an order for the Lake Country.
@@mikephillipsrealworlddetailing where can I get a 3” backing plate
Anyone have the link for his grease replacement video?
Video coming soon!
great tips. Thanks
Thank you for watching and commenting. -Mike Phillips
Take it apart and repack it hi temp grease 👍👍
Where do you buy a smaller 5 inch backing plate? I don't see a Bauer one, but is there a decent alternative?
A quality backing plate for this tool is made by Lake Country Manufacturing, they've been making these for decades and they are uniform in construction and balance. Buff and Shine Pads also offers a similar, high-quality 5" backing plate.
If vibration is a concern, I would avoid no-name, cheap backing plates off Amazon. It might be balanced, but it might not be balanced.
Thank you for watching and commenting. -Mike Phillips
@@mikephillipsrealworlddetailing Thank you for the info... getting ready to dip my toe into the polishing world (as a weekend warrior). Lot of awesome info found here.
Funny I bought the Bauer model as a beginner, used it on several cars. Then 2 years later felt comfortable enough and applied Dr Beasleys Nano MX. still looks great btw.
Great story, thanks for sharing. Also thanks for watching and commenting.
-Mike Phillips
Great story, thanks for sharing. Also thanks for watching and commenting.
-Mike Phillips
@MikePhillips-Dr.Beasleys
Can you recommend what I should use for my pickup truck. A 2020 F150 Black color, on the hood it has like water spots even after waxing by hand. I don't have a power polisher.
Thanks Bill
@@billmason7411 - Hi Bill. The reality is, with modern clearcoats it's pretty hard to do any type of paint correction by hand. I teach hand polishing techniques in my classes, but it's mostly for tight, small or intricate areas where it's difficult to get a spinning buffing pad.
The tool I show in this video is pretty simple and easy to use, even for a first-timer. Plus, before buffing out the hood of your truck, you could practice on the wife's or girlfriend's car. LOL
Besides that, a non-cleaning or non-abrasive wax isn't going to remove water spots. At a minimum you'll need what's called a Cleaner/Wax or AIO - AIO stands for All-in-One. This is a wax that contains some type of abrasive technology and this type of wax will remove swirls and water spots, polish the paint to a high gloss and leave some form of protection behind.
In the Dr. Beasley's line, we have NSP Z1 - which is a one-step ceramic AIO.
Hope that helps..
Mike
@mikephillipsrealworlddetailing
Ok, I'll get a buffer and the Z1.
I see you recommend 5" pads. Please
give a recommend pad to use with the Z1. I appreciate it.
Bill
Everyone loves an unboxing video, huh?
Well most people do, it's the curiosity factor plus *INTEREST* in the actual tool being unboxed.
Thanks for watching and commenting. -Mike Phillips
Just picked this one up last week for 35$ please do so with showing us that grease mod! Looking to detail my truck with this piece and some 3D compound ..
The Grease Mod video is in editing, it will be up soon. Subscribe to the channel to be notified. Thanks for watching and commenting. -Mike Phillips
Which backing plate they have that harbor freight one on sale today for 35 bucks I wanna buy it and upgrade plate idk which one to buy tho I never polished
I have never seen a 5" DA backing plate at Harbor Freight. If this is what you're looking for, you'll need to shop online.
Thanks for watching and commenting. -Mike Phillips
@@mikephillipsrealworlddetailingwhat thread is the backing plate????
@@charliemagoo7943 - 5/16" Fine Thread -Mike
Found it 5/16 24 on the spec page
First!!!!
Thanks for watching Humberto! -Mike Phillips
You lost credibility when you said buy the harbor freight warranty
Thanks for watching and commenting Steve! -Mike Phillips
Harbor freight is awesome 👌
Why not if they’ll replace it no questions asked ? Anything could happen .
@@mr.bhamgarage4570 - Steve simply has a different opinion and budget than other people. -Mike Phillips