Nice Video! Excuse me for the intrusion, I would appreciate your thoughts. Have you researched - Lammywalness Trendy Trade Guide (should be on google have a look)? It is a great exclusive guide for learning how to recondition batteries at home without the headache. Ive heard some awesome things about it and my best friend Jordan at very last got astronomical success with it.
Not certain about the points made but ,if anyone else wants to discover how to recondition battery try Battery Recovery Tactics ( battery.RecoveryTactics.com ) ? Ive heard some pretty good things about it and my cousin got great success with it.
Because of you I managed to salvage a bunch of 18650 batteries that would go to waste because the computer was broken. Thank you so much! I can now reuse the 18650s🥳
Really good for a person not finding new battery in the market easily or no budget for a new one. It will bring hope for him/her to revive his/her laptop.
Even after full charged ( auto cutoff green light turned on) as shown in video, why it is showing 73% when checked in laptop. It means one of the 4 batteries u did not change is gone. U checked 2 batteries in parallel at a time, obviously it won't show if one in 2 parallel connected batteries is bad. Best is to test each battery seperately.
Thanks, but I wasn't keen on seasonal music! The most important and worrying thing, however, is that you played the music over the soldering. It needs to be stressed that lithium batteries should not be overheated by excessive use of a soldering iron. Best wishes from London UK.
Great video but I have a question wouldn't it be safer to replace all six batteries at once because you don't know how many cycles the old/new batteries have so the capacity would be different thus potentially causing issues?
@@KULDEEPSINGH-ok7yt These are called 18650 lithium cells,easily u can order from any online shop or from local electric store. Avoid buying chinese versions Panasonic,LG and Sony are great and U can buy versions with high amp(u can ask from seller they guid you)and make your battry last longer
@@newyork9453 I would also recommend buying cells with solder tabs already installed. You aren't supposed to solder directly to the battery terminals (heat can cause cell to explode + they don't make for good solder joints. Solder won't want to stick to them). The solder tabs are tack welded usually which requires special equipment. So look for ones with solder tabs when you go to buy the cells. It will save you a lot of trouble. ;)
Well done sir! Very clear and practical.I guess your logic is that you save money from buying a new "battery" pack, so you can buy more things for yourself and your family at Christmas. Smart, innovative man!
Hello, just came back from the workshop after following the steps in you video and hey presto nice fully charged battery. In my case there was a badly soldered wire which was loose on opening which had the effect of reducing the top voltage to 8v also although all the cells were ok one was adrift from its welded tie reducing the capacity. Fixed both and now a nice big smile. Thanks for the inspiration to give it a try.
Superb video showing how to open up a laptop battery, test the cells and replace the bad ones. I would have loved to see troubleshooting and repair of battery circuit as well.
I believe some laptop battery packs will self-destruct if you remove a pair of cells or cut off the voltage to the controller board in the pack. Thus when the cells are replaced, the pack will refuse to work, and laptop will not recognize it. This is done to stop tampering of the sort you see in the video. I believe if you maintain the voltage when replacing, by using an external power source, this barrier can be circumvented .
You are correct - mine self-destructed (by burning out a PCB track) when I replaced two middle cells. I had separated all the cells to test them separatedly and I did not realise that the pack memory chip (a BQ20Z75) has the ability to destroy the circuit if its senses that the battery pack has been interfered with !
I suppose you either salvage similar batteries from old power supplies to good battery backups or refurbish your laptop battery. interesting tip. Thank you!
Dear sir, many, many thanks for your very productive project. I will now be able to use at-lease once the non-working pack. regards, aftab ahmed. London
hey ,if anyone else wants to uncover electronic repair tool kit try Saankramer Electronic Magazine System (just google it ) ? Ive heard some super things about it and my friend got great results with it.
4 года назад
hahahah I think it is an expression used in other languages... in Spanish we'd say "la batería te va a andar perfectamente"... "andar" literally means to walk, so that's a thing you know 😂😂
Thank you sir, after watching 3 postings how to repair laptop batteries, yours was the best. Very clear instructions presented in an easy to understand step by step DYI. Please keep up te good work.
I'm impressed. Everyone else just replaced everything. Testing the batteries and replacing the bad ones is a good idea. Can the batteries have good voltage but a high internal resistance causing them to perform poorly? Mine shows 100percent charge but the laptop quits instantly when unplugged
Repair is the best word, recondition is not. Battery conditiong is accomplished by depleting and recharging individual cells so the battery controller does not go into "safe mode".
Cool Idea. I bought the wrong battery for a Laptop and didn't return it in time. I just popped it open and now I'm using the 6 3.7 volt batteries in some spotlights and headlamps I own.
Thanks for your video Does the current Capacity of the battery matter here For example if I replace a (3.7 volt 2300 mah) battery with a (3.7 volt 12000 mah ) battery Does that damage the circuit ?
There are thousand of videos in youtube about changing the cells of a laptop battery, but i didn't find the video that " How to repair the circuit of Laptop's Battery? Dear Sir i request to you that please tell me the name of a machine that can identify all problems in Laptop battery Even in Circuit or Cells. Thanks alot for sharing your experience with us
For complete %100 working accus, You need eeprom, mcu counter resetter debugger software and hardware.. Compatible with your accu mcu!!! Second if smd fuse damaged you have to changed.( mostly 35-50V /5~8 Amp), damaged mosfets, or opamps..sometimes mcu too..Thats most common problems.
Thanks. Mine looked almost identical on the outside, except the connector is centered (HP Pavilion dv6700). It was much harder to open since the plastic was apparently melt-welded at the seams, so had to cut & break the plastic to get it apart. The batteries were also glued inside the case. Otherwise the six 18650 batteries were welded together the same and the 2 center ones were also reading no charge. Perhaps the middle ones die because they get hotter.
@@abdulnafay72 No, a new battery pack should be better if the cells are from a quality manufacturer (ex. Panasonic). Been a while, but I recall my repair worked, but the case got a bit mangled from the effort. I ran across a new battery pack on ebay or Amazon for ~$20 USD so bought one. Previously, a new pack cost $150 which wasn't justified for an older laptop PC. I recovered the good 18650 batteries and use them in flashlights now (plus some from other packs). Many people say they are still good-as-new if they charge to 4.2 VDC, but seems some of them do so but don't last long in the flashlight before needing recharge though haven't done new vs old comparisons. People use used 18650 batteries for many things, including rigging up backs for e-bikes and e-scooters (many youtubes). A Tesla Model S uses ~7000 of them (not easily recovered or swapped).
@@williamgrissom9022 I am getting the battery repaired from the shop it would cost me around 10$ and if I will get new original battery it will cost me around 35$.
@@abdulnafay72 I would risk the $10 repair. Worst-case, you will have to recharge more often, but I plug in my laptop to a wall outlet whenever I can regardless.
Thank you v v v much for the basic and your simple & honest information providing, really liked it and asked many friends to check this too. Can you please guide me how I can repair my Laptop battery of Sony VGN CR 35G or if I can send it to you, please? Where I can find the replaceble good quality battery for it? Please guide.
Nice video!!! I tried this to my laptop's battery and I would like to ask you if the new cells must have the same capacity with the older because after I did that with higher capacity cells(I replaced them all ),battery doesn't charge even though it recognizes it normally.
Yes. Must be exactly the same with everything because the circuit will never recognize Or the circuit must be restarted before connect them with batteries
In parallel yes, in series no, as long as the voltage is in a safe range and you put it on a charge. The BMS deals with balancing all the cells, but it doesn't hurt to make them similar in voltage.
Many Laptop batteries have a custom IC that monitors the cells and will permanently deactivate if new cells are installed. I assume there is some way to reset the IC for new cells, but good luck figuring that out.
after replacing the 2 bad cells, can the repaired array be plugged into the laptop, for testing, before putting them back into the case? thanks & great how-to video
Kids look this is how you make the real money. By spending your days watching sped-up youtube videos. I'm just kidding but the best education is self-taught education. Thanks for sharing your knowledge, you're awesome!
Well try a load of at least 1amp and see if the battery can handle it. How fast depleted? Some people know nothing about battery and still trying to say they are expert 🤣🤣🤣🤣
@@dragonballthings688 When I was a young lad, my dad would drive his car to the garage for a battery test. I was fascinated to watch the mechanic put a heavy gauge prong with a big gauge resistor across its cells, with a meter. It sparked spectacularly, then the mechanic would take the reading. The same principle works on lithium batteries (without the fireworks), but scaled down. Modern meters take hardly any current compared to the old swing-needle analogue ones, unless they are designed to test batteries.
You can't do normal soldering on this type of 18650 battery. If you do so, the the extreme heat during soldering will destroy the battery life. That's why preferred method is spot welding.
And when the battery pack has reached such a low voltage that the internal charging circuit has switched off, how do you reactivate the charging circuit as it does not happen automatically once the battery pack has been "reconditioned" by the replacement of the faulty cells ??
Apply a voltage, until minimum required charge attained. Check power supply, for needed voltage. Or, charge each cell individually. I've done it with a tablet. (I'm not an expert)
I have hp dv4 laptop. In my case, the white led beside the dc jack indicates that you have dc power and not to indicate 100% charged. There is another set of white leds located below the keyboard for hardisk activities, and charging condition.
I think it was a calibration issue, when the laptop battery was not good, it had let's say 85% of theoretical capacity in power available, so computer remap 85% of power to be 100% full. But when he turned the laptop on current was able to go into the battery so the computer understood it os not full, and will calibrate it again
People are far more capable than you give them credit for. Professional is just a paywall for people who prey on others ignorance. Don't be part of the fear mongering culture that likes to keep people uninformed and incapable. For example: Did you know that barbers used to do dentistry? Imagine paying 20$ instead 4000$ for the same procedure.
I don't recommend replacing few cells with totally different brand . As different cells made by different manufacturers react differently when plugged to recharge . You will overheat or potentially blast
Superb. I have a pavilion g6 i5 laptop. My problem is, it stops charging several times during a charging process. Backup is not my problem but charging+ stop charging+ charging+stop charging and then again charging is the main problem for me. Thanks
Excellent video! Thank you for the instructions!
The selection Jingle Bells for a technical video cracked me up.
Excellent lesson. Thanks
bhai urdu me hi video de dia kro waise bhi english ki mba kr rhy xD
Bsr se ho ap
Nice Video! Excuse me for the intrusion, I would appreciate your thoughts. Have you researched - Lammywalness Trendy Trade Guide (should be on google have a look)? It is a great exclusive guide for learning how to recondition batteries at home without the headache. Ive heard some awesome things about it and my best friend Jordan at very last got astronomical success with it.
Not certain about the points made but ,if anyone else wants to discover how to recondition battery try Battery Recovery Tactics ( battery.RecoveryTactics.com ) ? Ive heard some pretty good things about it and my cousin got great success with it.
Because of you I managed to salvage a bunch of 18650 batteries that would go to waste because the computer was broken. Thank you so much! I can now reuse the 18650s🥳
I was hesitant to solder a battery. I copied what you did and it worked fine. Thanks!!
Really good for a person not finding new battery in the market easily or no budget for a new one. It will bring hope for him/her to revive his/her laptop.
Thanks : 17 Euros by myself , complete battery cost : 70 euros , thank U very much
Pls reply to my comment about being unable to fit the soldered pack back due to solder bumps. I think thats why they do strip resistance welding.
Even after full charged ( auto cutoff green light turned on) as shown in video, why it is showing 73% when checked in laptop. It means one of the 4 batteries u did not change is gone. U checked 2 batteries in parallel at a time, obviously it won't show if one in 2 parallel connected batteries is bad. Best is to test each battery seperately.
Yes middle battery not both are damage
Yes, you're right, I was also thinking about this issue, when he was measuring voltage..
@@Mr_Cap. LP
How to check battery terminal
Oh it's fully charged, yes, one of the other 4 batteries is faulty... 😳
I'm from Malaysia... and I got a lot of knowledge from Indians, these Indians are all wise and intelligent
This laptop battery is the best quality, I also made one power bank by using the laptop battery.
dont advertise bicych
@@jfghjfghjsldkfjlksdjf6997 lol
@@jfghjfghjsldkfjlksdjf6997 u mad dude
Thank you for taking the time to show us.
"I wish you health, wealth, and the time to share your joy."
This guy is real. his works, very real. Good job
Thanks and my pleasure..
Life saver. I want to refurbish a battery that is no longer in production so this is my only option.
Thanks, but I wasn't keen on seasonal music! The most important and worrying thing, however, is that you played the music over the soldering. It needs to be stressed that lithium batteries should not be overheated by excessive use of a soldering iron. Best wishes from London UK.
Ok
Must be Christmas because Im hearing Jingle Bells 🤣 so random to put that song in but interesting video😅
Great video but I have a question wouldn't it be safer to replace all six batteries at once because you don't know how many cycles the old/new batteries have so the capacity would be different thus potentially causing issues?
it would be better.
cells are cheap,so if u r doing this do a complete replace
@@newyork9453 Please guide from where cells can be purchased. Thanks in advance
@@KULDEEPSINGH-ok7yt These are called 18650 lithium cells,easily u can order from any online shop or from local electric store.
Avoid buying chinese versions
Panasonic,LG and Sony are great
and U can buy versions with high amp(u can ask from seller they guid you)and make your battry last longer
@@newyork9453 I would also recommend buying cells with solder tabs already installed. You aren't supposed to solder directly to the battery terminals (heat can cause cell to explode + they don't make for good solder joints. Solder won't want to stick to them). The solder tabs are tack welded usually which requires special equipment.
So look for ones with solder tabs when you go to buy the cells. It will save you a lot of trouble. ;)
If the power is completely cut off from the bms chip, it will die and you will not be able to turn it on again
Well done sir! Very clear and practical.I guess your logic is that you save money from buying a new "battery" pack, so you can buy more things for yourself and your family at Christmas. Smart, innovative man!
Good informative video, thank you.Saving lot of unnecessary spending purchasing new battery.
Hello, just came back from the workshop after following the steps in you video and hey presto nice fully charged battery. In my case there was a badly soldered wire which was loose on opening which had the effect of reducing the top voltage to 8v also although all the cells were ok one was adrift from its welded tie reducing the capacity. Fixed both and now a nice big smile. Thanks for the inspiration to give it a try.
Great to here. Pleasure is all mine. Thanks
@@innovativeideas but mostly, the defective one, is the small circuit, inside the battery pack! lol
Superb video showing how to open up a laptop battery, test the cells and replace the bad ones. I would have loved to see troubleshooting and repair of battery circuit as well.
See this video also related to battery repairing
ruclips.net/video/R-_XVQG21tk/видео.html
Damn he even put it back in one piece. Worst case scenario I will do it as you my good sir.
saved my money & day... and I was searching for Hp battery only :) thanks
I believe some laptop battery packs will self-destruct if you remove a pair of cells or cut off the voltage to the controller board in the pack. Thus when the cells are replaced, the pack will refuse to work, and laptop will not recognize it. This is done to stop tampering of the sort you see in the video. I believe if you maintain the voltage when replacing, by using an external power source, this barrier can be circumvented
.
You are correct. You have to do this very carefully because once tampered, it will even refuse to detect same battery packs.
You are correct - mine self-destructed (by burning out a PCB track) when I replaced two middle cells. I had separated all the cells to test them separatedly and I did not realise that the pack memory chip (a BQ20Z75) has the ability to destroy the circuit if its senses that the battery pack has been interfered with !
For battery repairing see this video
ruclips.net/video/R-_XVQG21tk/видео.html
Have you found any solution to it?
Can this be avoided by first disconnecting the panel?
khair de v engneer saib ta zarkhez zahn de mindalea da masha allah janab
pleasure is all mine. Thanks
I suppose you either salvage similar batteries from old power supplies to good battery backups or refurbish your laptop battery. interesting tip.
Thank you!
ruclips.net/video/R-_XVQG21tk/видео.html
Dear sir, many, many thanks for your very productive project. I will now be able to use at-lease once the non-working pack. regards, aftab ahmed. London
"your battery will walk smoothly" 😂 this guy is awesome.
Anyways.... Work.
hey ,if anyone else wants to uncover
electronic repair tool kit
try Saankramer Electronic Magazine System (just google it ) ? Ive heard some super things about it and my friend got great results with it.
hahahah I think it is an expression used in other languages... in Spanish we'd say "la batería te va a andar perfectamente"... "andar" literally means to walk, so that's a thing you know 😂😂
The Christmas music is cracking me up! Great vid!
Thank you sir, after watching 3 postings how to repair laptop batteries, yours was the best. Very clear instructions presented in an easy to understand step by step DYI. Please keep up te good work.
I'm impressed. Everyone else just replaced everything. Testing the batteries and replacing the bad ones is a good idea. Can the batteries have good voltage but a high internal resistance causing them to perform poorly? Mine shows 100percent charge but the laptop quits instantly when unplugged
Today is Christmas and i watched this video . Jesus is with me.
Stay blessed. Thanks
Repairing a battery while listening to the Christmas song made my day
Explanations and the video are very very clear.The demo. Is also very good. Thanks.
Very good excellent and easy way to check and repair the battery thanks to shering video.
I love your English
I liked because you was very fast and clean... cool, from Brazil
THIS IS USEFUL FOR US THANKS FOR THE DEMONSTRATION .
For batteries video more
Visit this
ruclips.net/video/R-_XVQG21tk/видео.html
Very good video and much appreciated... New batteries are terribly over-priced. Where can I purchase individual new cells of the same type? Denny
Repair is the best word, recondition is not. Battery conditiong is accomplished by depleting and recharging individual cells so the battery controller does not go into "safe mode".
It looks easy for you to soldear the battery. What kind of flux you use and How to make it? Thanks a lot.
Sir u r genius
Bahot acha video hai, please bataye battery Kanha se mil jayega, aur iske liye multimeter jaruri hai kya?
If these replaced cells have much defferent internal resistance and capacity than other cells then the battery will not work for long.
Is there required amperage for laptops?
i was wondering about this
it means replacing all battery cells with same mah will be better?
Cool Idea. I bought the wrong battery for a Laptop and didn't return it in time. I just popped it open and now I'm using the 6 3.7 volt batteries in some spotlights and headlamps I own.
Love the Christmas music
hi this is ijaz , i like ur video, i have 3 batteries of my laptop, now i'll try to repair myself, thankx for this
Your laziness?
Brilliant! Very clear instructions. Thankyou!
Thanks for your video
Does the current Capacity of the battery matter here
For example if I replace a (3.7 volt 2300 mah) battery with a (3.7 volt 12000 mah ) battery
Does that damage the circuit ?
hello! thanks for you learning process, for your help i like your Ideas. Greetings from Venezuela
bahut sunder videos
me khud hi ripayer kar liya
thanks for the video
Work it or not
There are thousand of videos in youtube about changing the cells of a laptop battery, but i didn't find the video that " How to repair the circuit of Laptop's Battery?
Dear Sir i request to you that please tell me the name of a machine that can identify all problems in Laptop battery Even in Circuit or Cells.
Thanks alot for sharing your experience with us
please wait for some days. I will work for that.. (Circuit Repairing of battery.) Thanks
Exactly right! I am agree with you.
9 month and waiting...
and waiting...
For complete %100 working accus, You need eeprom, mcu counter resetter debugger software and hardware.. Compatible with your accu mcu!!! Second if smd fuse damaged you have to changed.( mostly 35-50V /5~8 Amp), damaged mosfets, or opamps..sometimes mcu too..Thats most common problems.
Fantastic video bro. Helpful . Saved at least 4K for me.
Thanks a lot. You are very clear in your instructions, and super understandable.
Thank u because I was about to go buy a battery for my laptop.
I like the pice of wood you’re using...
i was like, what the fuck xD
I'm trying to understand your thought process.
Thank you for sharing ... I repaired my laptop battery.
Thanks. Mine looked almost identical on the outside, except the connector is centered (HP Pavilion dv6700). It was much harder to open since the plastic was apparently melt-welded at the seams, so had to cut & break the plastic to get it apart. The batteries were also glued inside the case. Otherwise the six 18650 batteries were welded together the same and the 2 center ones were also reading no charge. Perhaps the middle ones die because they get hotter.
Is repairing battery is as new battery?
@@abdulnafay72
No, a new battery pack should be better if the cells are from a quality manufacturer (ex. Panasonic). Been a while, but I recall my repair worked, but the case got a bit mangled from the effort. I ran across a new battery pack on ebay or Amazon for ~$20 USD so bought one. Previously, a new pack cost $150 which wasn't justified for an older laptop PC. I recovered the good 18650 batteries and use them in flashlights now (plus some from other packs). Many people say they are still good-as-new if they charge to 4.2 VDC, but seems some of them do so but don't last long in the flashlight before needing recharge though haven't done new vs old comparisons. People use used 18650 batteries for many things, including rigging up backs for e-bikes and e-scooters (many youtubes). A Tesla Model S uses ~7000 of them (not easily recovered or swapped).
@@williamgrissom9022 I am getting the battery repaired from the shop it would cost me around 10$ and if I will get new original battery it will cost me around 35$.
@@williamgrissom9022 If good quality cells are used then it is as new battery?
@@abdulnafay72 I would risk the $10 repair. Worst-case, you will have to recharge more often, but I plug in my laptop to a wall outlet whenever I can regardless.
Thank you v v v much for the basic and your simple & honest information providing, really liked it and asked many friends to check this too. Can you please guide me how I can repair my Laptop battery of Sony VGN CR 35G or if I can send it to you, please? Where I can find the replaceble good quality battery for it? Please guide.
This method only works in Christmas so do it before it gets patched
hahaah
wow!!superb video..its..will..easily..work...wow..thanku...
Nice video!!!
I tried this to my laptop's battery and I would like to ask you if the new cells must have the same capacity with the older because after I did that with higher capacity cells(I replaced them all
),battery doesn't charge even though it recognizes it normally.
Yes. Must be exactly the same with everything because the circuit will never recognize
Or the circuit must be restarted before connect them with batteries
Still you have to reset the mcu & eeprom counters. So you need debugging tool softaware and hardware. Forget about your accu. Go buy new one.
super, sir, Please several videos like this
X'-D The christmas music!!
Nice keep it up good information
Wow, you are amazing bro. May I know where is your service center so that I can get my battery to get it fixed.
You're really good. Thanks for the idea. I can now recondition my laptop battery
That’s interesting! Even though the good-condition cells’ voltage are not same , you combine them. Aren’t they supposed to be the same voltage?
In parallel yes, in series no, as long as the voltage is in a safe range and you put it on a charge. The BMS deals with balancing all the cells, but it doesn't hurt to make them similar in voltage.
Thank you so much, without knowing I had changed two of my systems with new battery. Not any more
I did the same but notification says your battery is permanently failed.
Amazing, like your innovative ideas it really save me a lots of thousands HERE IN NIGERIA.
Did you try it kaka
It's not good for long term use. The li-ion battery set need balanced charging. It's better to replace all the 6 cells.
Many Laptop batteries have a custom IC that monitors the cells and will permanently deactivate if new cells are installed. I assume there is some way to reset the IC for new cells, but good luck figuring that out.
How to reset ic
@@school877 ruclips.net/video/Nxfv6SsrYIg/видео.html reset battery
it's not for rich persons :)
i think we ALL know THAT allready
after replacing the 2 bad cells, can the repaired array be plugged into the laptop, for testing, before putting them back into the case? thanks & great how-to video
Uploaded October 30
Uses Christmas music anyway
Bro, my videos slowly gets views counts. I was assuming that till 25 December, it may become viral...
That's why... Anyway good question.
Thanks.
And watching it in Christmas, made me think why is? I thought that maybe RUclips has replaced this music somehow
Kids look this is how you make the real money. By spending your days watching sped-up youtube videos.
I'm just kidding but the best education is self-taught education. Thanks for sharing your knowledge, you're awesome!
where Do I get the replacement batteries ? Good work, namaste !
Link is given below video. These are lithium ion cells known as
Li-ion batteries. Thanks
These batteries are also available in any electronic cigarette or VAPE store
we're the same laptop we use (G4-1318tx) Thanks for this video, have another idea!
You teach technically, nice... All other videos showing uninstalling battery driver are foolish..
This has nothing to do with drivers... those are software...
Thks for the video sir, what 18650 type i should use ? Is it only icr type?
checking voltage with no load doesn't give a good image of the batteries real condition
With no load means? What load you want
The meter he's using was the load, wasn't it?
Well try a load of at least 1amp and see if the battery can handle it. How fast depleted?
Some people know nothing about battery and still trying to say they are expert 🤣🤣🤣🤣
@@mr.electronicsdevicevlog9333 True enough! The capacity of the battery is just as important - unless you just want a quick temporary fix!
@@dragonballthings688 When I was a young lad, my dad would drive his car to the garage for a battery test. I was fascinated to watch the mechanic put a heavy gauge prong with a big gauge resistor across its cells, with a meter. It sparked spectacularly, then the mechanic would take the reading. The same principle works on lithium batteries (without the fireworks), but scaled down. Modern meters take hardly any current compared to the old swing-needle analogue ones, unless they are designed to test batteries.
Thanks for the info bro but the xmas song" gingle bells " lol
You can't do normal soldering on this type of 18650 battery. If you do so, the the extreme heat during soldering will destroy the battery life. That's why preferred method is spot welding.
Arjun Chatterjee exactly but don’t expect a person with a English accent like this one to care about things like that 😂
excellent video
please inform me how buy the cells
THanks pare ! ure the man :)
I'm unable to do saldering
good one . I thought if battery gone need to change full battery . thanks for video
And when the battery pack has reached such a low voltage that the internal charging circuit has switched off, how do you reactivate the charging circuit as it does not happen automatically once the battery pack has been "reconditioned" by the replacement of the faulty cells ??
Yes i needed the answer to this question.. someone expert please respond
Apply a voltage, until minimum required charge attained. Check power supply, for needed voltage. Or, charge each cell individually. I've done it with a tablet.
(I'm not an expert)
Great video! What kind of solder flux did you use?
Christmas music?
Hi Very innovative. Please tell me waht is the substance you rub on the metal tag before putting on solder?
The white light indicates that the battery is 100% charged. But when u switch ON the laptop, it's only 73% charged. Why so?
DAD OF ADS good point, since it was old battery and I was not having new li ion cells, which I have re installed.
I have hp dv4 laptop. In my case, the white led beside the dc jack indicates that you have dc power and not to indicate 100% charged. There is another set of white leds located below the keyboard for hardisk activities, and charging condition.
I think it was a calibration issue, when the laptop battery was not good, it had let's say 85% of theoretical capacity in power available, so computer remap 85% of power to be 100% full. But when he turned the laptop on current was able to go into the battery so the computer understood it os not full, and will calibrate it again
Absolutely amazing, only method that really works, thanks
I want to know about repair of the keyboard of this version HP pavilion g4 laptop.
Nice..now all I need to do is find my old laptop batter 😭
It's better not to solder the cells, as not everyone is professional. Better to give it to highly experienced person.
People are far more capable than you give them credit for. Professional is just a paywall for people who prey on others ignorance. Don't be part of the fear mongering culture that likes to keep people uninformed and incapable. For example: Did you know that barbers used to do dentistry? Imagine paying 20$ instead 4000$ for the same procedure.
I love your choice of music for the repair job :D
Fun fact: Your multimeter is exactly the same as mine!
Company &model name
At what level would you put in the new cells? Completely empty (3.5v) or full (4.2v)?
I don't recommend replacing few cells with totally different brand . As different cells made by different manufacturers react differently when plugged to recharge . You will overheat or potentially blast
No. Because the charge is balanced.
Took my Sony battery pack apart and taking the pack apart was the hardest. Replacing the cells, no problem. Thank you.
thanks
bro
Ok
Superb. I have a pavilion g6 i5 laptop. My problem is, it stops charging several times during a charging process. Backup is not my problem but charging+ stop charging+ charging+stop charging and then again charging is the main problem for me. Thanks
Excellent!!!
New sub bhai!.....super video