thanks for the informative video. I have been searching for information as to why the outer pontoons are designed and built like they are, before we make a purchase of a SWITCH. Thanks for the explanation that they are designed to take in water for weight distribution. my local salesman at the dealer didn't even know this.
Buying a Switch 18-230 Cruise, thank you for this video, great job!!! Just a here's my boat, here's my walk around, before you purchase video. Not showing off or doing stupid stuff. Your verbiage and humor a couple of times cracked me up. Good job bud
230 21 ft owner myself.... there is a lot better way to install battery tender on a switch...install a plug in port on the console next to the fuel filler...and run the cord under the floor tiles,,, hidden and out of the way
Favorite vid on the Switch. Good Job explaining it without doing a sales pitch. Thinking strongly about a switch. Just moved to Crystal River & no props for the Manatees is appealing. Concerned about durability of the plastic everything, and longevity of the motor. Really like the maneuverability.
Thanks for the video. I have a couple Sparks that I bought when they first came out and they use the same hull material. It was new concept at the time (a few Yamaha owners gave me crap) but after having them for 5 +years now I've grown to like it better than the fiberglass hull on my boat. I'm considering the exact same boat you have. Was hoping (as an owner) you would have commented on how it handles chop, top speed, etc.. I'll be using mine on a fairly large lake that can get a bit choppy if the wind kicks up.
If you have the 5-pin converter, you don’t need to tape/magnet that pin in your trailer. You just need power to that 5th wire so that you don’t activate the solenoid when backing up. If you do tape it and you are driving with it and stop, the mechanical brake on the trailer will not activate. Only your vehicle brakes stop you and the trailer brake will not help you stop. Hope that makes sense.
Great video thanks. I solved the problem with the fender clip problem by simply taking a round file to the inside parting line left by the injection molding process. Careful - it doesn’t take much filing and these clips fit looser is some places on the tubular frame.
Nice video. I have a the same boat but the cruise. Always interested in seeing how folks have configured things differently. Always good to see everyone complaining about the bumper connections. FWIW the rope you have connected at the back secured w the Velcro tie…..great idea until it isn’t….if that rope falls out and sucked into the intake you’re done. IDF won’t kick it out. I do the same thing but with a 6’ stretch cord that won’t reach the inlet if it falls into the water. Enjoy that FL wx!
Great video. Lots of insight. I would like to see a video, after you get more time in the switch, specifically on the gripes or things you feel could have been done better. Also any wear and tear that may occur as you get more hours. Thanks again for the video.
You got it! its been a littler colder than we like here in FL with the kids and all so we havent really used it much but thats my plan over the next few weeks
I have the 2022 Seadoo Sport 18 and I love it. I always raise the Bimini top when I get on the boat so I never have to crawl under it. I drive with it up not open as well, which cuts down on the drag. when I put the cover on it I go out the back when I get the cover over the bimini top and go down the swim deck ladder and then snap and strap it all down. I know that it is not recommended to do that. You can get a ladder and set it up to get off the boat. I do that some times.
Greetings from a Tiny Island in Maine, USA . Man sea doo should be paying you. Not exactly my style but you give a great, honest review. Also I dig visiting Fla….. mostly west coast. ✌️
Just got mine (21 foot Cruise with the 230 supercharged motor) and love it. Just an FYI on the 5 pin wiring, the 5th pin is for the breaks so you don't have to put the pin in when backing up. At least that is what the dealer told me, I went to Amazon and for a little over $10 I got an adaptor that goes form 7 pin to both 4 and 5 pin. Have not put the pin in once when backing up and have had no issues so it looks like the dealer was telling the truth. lol
Thank you so much for making this video! It was extremely helpful, informative, and useful! I plan to buy one of these soon, and need to know what I don't know.
I love ours 21 ft got it late September. Got about 9 hours on it because we live in NC were it alot colder. Looking forward for warmer weather. Great video
The five pin trailer connection is for electrically activating a solenoid so the brakes do not lock up in Reverse, it's an easy way to do it then using that mechanical brake block you showed us
Dude thanks for the heads up about getting on it. I’ll probably attack some kind of bottle Jack to the rear of the trailer so it won’t lean backwards lol
Do those square soft floor tiles get hot in the sun? Actually, either the just plastic floor or the soft tile? Do either of them get toasty on bare feet?
Great video! I just got this exact boat and absolutely love it. So far my only complaint is that it does not like the wind although it’s been a consistent 15mph here in TN for the last few weeks so my opinion on that will probably change once the weather calms down.
Hi there, Can you board the vessel from the back corner gate from the dock. Hope that made sense. Our dock is long and one sided so we don’t have a way to board from the front.
I am a graphic installer and ypu cam use primer 94 on those vinyl lettering amd it will stick. Use a hair dryer or heat gun in you have one to post heat the vinyl after layer and it will shrink down into the texture of tje polytech and set the adhesive on the graphics and the primer.
Great video. Looking into possibly purchasing one. Answered a bunch of questions I had. BUT, how much of a pain is the wash down? Being in the saltwater and kids getting in and out, I image the saltwater gets everywhere in all the nooks and crannies all over the deck. Doesn’t seem very wash down friendly as there would be standing water in the spaces on the deck. Am I missing something or is there an easy answer? I’m a clean freak when it comes to washing saltwater off my boats. Thanks in advance for any insight!
It is actually friendlier than conventional pontoons. Just wash away! you can pop up the soft tiles and almost every surface can be washed. The pontoons have plenty of space to allow dirt to wash out. I struggles with my older aluminum pontoon because everything was bolted or built in. That where debris and eventually mold took hold. Treat it like a watercraft "jet -ski" instead of a boat. Its made to get wet!
Great video. My question, that has been a bit difficult to find the answer to, is how long is the engine life on the Rotax engine. Everything I read is around 500 hours. Seems like a very short life compared to other engines. Thanks!
That's a concern I had too. The answers vary wildly but it seems like model number and application make a huge difference. The 500-1,000 hours seems to be on Rotax motors in snow mobiles (which I imagine live harder lives than boats). One forum cited the marine application (not sure which output) typically lasts 2,500-3,000 following prescribed maintenance. That being said the switch has only been out a few years so time will tell if the heavier weight makes much of a difference.
When Bimini is down what is the height from concrete to the top of the Bimini in the closed position. Could it be stored in a garage with 8’ high door? How easily could you remove the swim platform. My garage is 21’ deep with garage door closed. My thoughts were to purchase an 16’ + the 2’ swim deck. When store it at the house I would take off the swim platform and store it.
Since you have experience with both the Yamaha jet boat and Sea Doo switch, I'm curious what your thoughts were comparing the two, pros and cons. I'm considering one or the other as well!
@@c.juneau410 I would call them but from I know it’s the same ACE 1630 motor that’s in the 100hp all the way up to the 300. Only difference is the way they are tuned and wether or not it has a supercharger on it or not.
This is an amazing video man, you’re a true well spoken trainer. You killed me when you said the last thing you wanna do is get stuck stranded on a boat with your family, or alone or ever LMAO.
Q: I noticed that you are a bigger guy. I’m interested in this as my son pushes 350. Is there a weight limit listed for the deck, not the overall carrying capacity, but a psi or psf limit? The two storage access points (storage and engine compartments) have a plastic bridge at the outer edges. It doesn’t look like there’s anything except the cover that spans the center of the panel.
Thank you for the information. I have been looking into these and noticed to out fit ine it is very expensive. Then the added "commodity surcharge...1400. So I am just learning about them but it appears to get very expensive fast. Are you able add additional lights and such easily? Can wire be run as needed. Regular pontoon boat stupidly easy. Thanks again. Kind of like an expensive bobber, lol
Just bought a 24 foot by 8.5 foot Tahoe tri-toon with a 200 horse Suzuki, and performance lifting fins, for 55K including the trailer, tax, and everything. I don't really see why people would by this for nearly 50K! That is crazy.
Because it is ugly, overpriced, and does not have half the options, or do half the things this Switch does. I wonder how you feel a year later, now knowing you wasted $55k, for a boat that's worth $27k now.
why tape reverse lockout in? You have a truck w/ 7 pin connector, this has a reverse lockout pin. When in reverse (with trailer harness connected), it triggers a solenoid on trailer to lockout surge brakes.
Thanks Bro. You just saved me $30,000. What a bunch of hassles, unique to this design. I’ll take an old wood diesel boat, a can of varnish and a bilge pump. Toilet and small frig. $12,000 no problem.
I bought a switch and I am trying to get my boat lift reconfigured to fit. The Hewitt lift dealer is trying to help me get the right bunks and configuration for it but seems to be strugging a bit. Did your neighbor across the street with the lift have any trouble with this? Thanks
Fantastic video dude. Curious as to how the motor and seats are holding up, and what type of water you are using it in. My last seadoo boat ran with little issues on the banana river which is brackish water. When i moved to north tampa i feel like tge salt content in the watee hammered the seat materials and motor.
Have you had wet kids coming in & out of the boat yet? Curious about how slick the flooring gets as well as where all that water drains to…does water end up in your engine compartment?
If you have the trailer wire connected it disengages the brakes when you’re in reverse so you don’t need any kind of tape or whatever you’re doing that I mean, I know it’s like a year ago so I’m sure you probably figured this out by now, but I don’t know how somebody doesn’t know that
the first thing I thought of when seeing the switch is like Windows for your PC. It is a "platform" that will allow 3rd parties to create all sorts of cool add ons. Personally, I am working on a water cannon to lock into the deck!!!!!!
Great video, I’m thinking about getting the 18’ so it will fit in my garage. I too was looking at the Yamaha 21 but too expensive. Anything about the switch I should consider before purchasing?
Switch owner in central Florida here. Curious how often you cross paths with other Switch boats? Personally know someone with one on the Winter Haven chain of Lakes nearby myself a few miles away. Met someone with this boat up at lake Minneola three or so months ago. One other occasion that escapes me. We have the 13 foot sport. We definitely have the same thoughts and opinions overall. Kind of conflicted because on one hand buying something this new you have to deal with the flaw designs that will probably be corrected. On the other hand I doubt my cost with price increases would make me all that happy had I waited for a better overall product. We have had some nice times with it . But I wish I knew beforehand how easily the jet boats will damage if you are not really cautious around shallow water. Hard lesson learned there.
if your switch yellow ? i think i came across you on lake minneola lol gotta watch the shallow waters for sure. i installed the garmin transducer for depth reading but sometimes its too late and your already in the shallow before the reading hits.
Great video! How is the ladder and access into the boat from the water? Is it functional and comfortable? I only see one handle to get up out of water and was curious. Thanks!
thanks for the informative video. I have been searching for information as to why the outer pontoons are designed and built like they are, before we make a purchase of a SWITCH. Thanks for the explanation that they are designed to take in water for weight distribution. my local salesman at the dealer didn't even know this.
Buying a Switch 18-230 Cruise, thank you for this video, great job!!! Just a here's my boat, here's my walk around, before you purchase video. Not showing off or doing stupid stuff. Your verbiage and humor a couple of times cracked me up. Good job bud
This is the best video showing an in depth look at this thing. Nice work
Seen a lot of sea doo videos. Yours is the best. Very informative. Thanks
Thank you so much for taking the time to make this video! Very informative. Im so excited to pick mine up
Thank you for this walkthrough. It’s quite thorough. I don’t think I have seen anyone talk or show the things you showed us.
230 21 ft owner myself.... there is a lot better way to install battery tender on a switch...install a plug in port on the console next to the fuel filler...and run the cord under the floor tiles,,, hidden and out of the way
i totally agree with you and its on my to do list.
Favorite vid on the Switch. Good Job explaining it without doing a sales pitch. Thinking strongly about a switch. Just moved to Crystal River & no props for the Manatees is appealing. Concerned about durability of the plastic everything, and longevity of the motor. Really like the maneuverability.
Very well done showing the many nuances of this type of pontoon vs others
Thanks for the video. I have a couple Sparks that I bought when they first came out and they use the same hull material. It was new concept at the time (a few Yamaha owners gave me crap) but after having them for 5 +years now I've grown to like it better than the fiberglass hull on my boat. I'm considering the exact same boat you have. Was hoping (as an owner) you would have commented on how it handles chop, top speed, etc.. I'll be using mine on a fairly large lake that can get a bit choppy if the wind kicks up.
If you have the 5-pin converter, you don’t need to tape/magnet that pin in your trailer. You just need power to that 5th wire so that you don’t activate the solenoid when backing up.
If you do tape it and you are driving with it and stop, the mechanical brake on the trailer will not activate. Only your vehicle brakes stop you and the trailer brake will not help you stop. Hope that makes sense.
Great video. Lots of good information. Thank you for taking the time to make this.
nice video! best one Ive seen on these, explains way more than most. Thank You
Great video thanks.
I solved the problem with the fender clip problem by simply taking a round file to the inside parting line left by the injection molding process. Careful - it doesn’t take much filing and these clips fit looser is some places on the tubular frame.
oh awesome man thanks for that info. i will give it a try and report back.
Nice video. I have a the same boat but the cruise. Always interested in seeing how folks have configured things differently. Always good to see everyone complaining about the bumper connections. FWIW the rope you have connected at the back secured w the Velcro tie…..great idea until it isn’t….if that rope falls out and sucked into the intake you’re done. IDF won’t kick it out. I do the same thing but with a 6’ stretch cord that won’t reach the inlet if it falls into the water. Enjoy that FL wx!
Great video. Lots of insight. I would like to see a video, after you get more time in the switch, specifically on the gripes or things you feel could have been done better. Also any wear and tear that may occur as you get more hours. Thanks again for the video.
You got it! its been a littler colder than we like here in FL with the kids and all so we havent really used it much but thats my plan over the next few weeks
Time for another video? @@francophoto219
I have the 2022 Seadoo Sport 18 and I love it. I always raise the Bimini top when I get on the boat so I never have to crawl under it. I drive with it up not open as well, which cuts down on the drag. when I put the cover on it I go out the back when I get the cover over the bimini top and go down the swim deck ladder and then snap and strap it all down. I know that it is not recommended to do that. You can get a ladder and set it up to get off the boat. I do that some times.
That's why you need the 5 pin connection. It's for the brake at the tongue of the trailer. It releases when the vehicle is put into reverse.
The last thing you want is to be stranded on the water.....ever. Classic.
Greetings from a Tiny Island in Maine, USA . Man sea doo should be paying you. Not exactly my style but you give a great, honest review. Also I dig visiting Fla….. mostly west coast. ✌️
Thanks for all the useful information. We are looking at a Switch soon.
50 degrees, that's swimming weather in the midwest !
Just got mine (21 foot Cruise with the 230 supercharged motor) and love it. Just an FYI on the 5 pin wiring, the 5th pin is for the breaks so you don't have to put the pin in when backing up. At least that is what the dealer told me, I went to Amazon and for a little over $10 I got an adaptor that goes form 7 pin to both 4 and 5 pin. Have not put the pin in once when backing up and have had no issues so it looks like the dealer was telling the truth. lol
Thank you so much for making this video! It was extremely helpful, informative, and useful! I plan to buy one of these soon, and need to know what I don't know.
I love ours 21 ft got it late September. Got about 9 hours on it because we live in NC were it alot colder. Looking forward for warmer weather. Great video
Very cool! congrats on your boat. enjoy the heck out of it.
What you guys seeing for Dealer prep cost and Freight charges in addition?
The five pin trailer connection is for electrically activating a solenoid so the brakes do not lock up in Reverse, it's an easy way to do it then using that mechanical brake block you showed us
Dude thanks for the heads up about getting on it. I’ll probably attack some kind of bottle Jack to the rear of the trailer so it won’t lean backwards lol
Do those square soft floor tiles get hot in the sun? Actually, either the just plastic floor or the soft tile? Do either of them get toasty on bare feet?
Great video! I just got this exact boat and absolutely love it. So far my only complaint is that it does not like the wind although it’s been a consistent 15mph here in TN for the last few weeks so my opinion on that will probably change once the weather calms down.
Are there videos to winterize this type of boat?
Can’t wait till storm season hits here In Florida. I love this little boat
Hi there,
Can you board the vessel from the back corner gate from the dock. Hope that made sense. Our dock is long and one sided so we don’t have a way to board from the front.
I am a graphic installer and ypu cam use primer 94 on those vinyl lettering amd it will stick. Use a hair dryer or heat gun in you have one to post heat the vinyl after layer and it will shrink down into the texture of tje polytech and set the adhesive on the graphics and the primer.
Thanks for sharing the video and your opinion.
Thank you for such a detailed video. It is good to know.
Great video. Looking into possibly purchasing one. Answered a bunch of questions I had. BUT, how much of a pain is the wash down? Being in the saltwater and kids getting in and out, I image the saltwater gets everywhere in all the nooks and crannies all over the deck. Doesn’t seem very wash down friendly as there would be standing water in the spaces on the deck. Am I missing something or is there an easy answer? I’m a clean freak when it comes to washing saltwater off my boats. Thanks in advance for any insight!
It is actually friendlier than conventional pontoons. Just wash away! you can pop up the soft tiles and almost every surface can be washed. The pontoons have plenty of space to allow dirt to wash out. I struggles with my older aluminum pontoon because everything was bolted or built in. That where debris and eventually mold took hold. Treat it like a watercraft "jet -ski" instead of a boat. Its made to get wet!
Great video. My question, that has been a bit difficult to find the answer to, is how long is the engine life on the Rotax engine. Everything I read is around 500 hours. Seems like a very short life compared to other engines. Thanks!
That's a concern I had too. The answers vary wildly but it seems like model number and application make a huge difference. The 500-1,000 hours seems to be on Rotax motors in snow mobiles (which I imagine live harder lives than boats). One forum cited the marine application (not sure which output) typically lasts 2,500-3,000 following prescribed maintenance. That being said the switch has only been out a few years so time will tell if the heavier weight makes much of a difference.
Jet skis are always always always in the shops here in Florida . This is basically the same, looks cool but no thanks.
Can Portable solar panels be installed to keep battery charged for when you upgrade your craft with outlets for cell , marine radio?
Nice informative Video --- Does the Swim Platform that fits onto the 21ft, will it also fit onto the 13ft Compact?
One of the best videos about the switch. Thank you. Can you bring the switch in rough waters or where do you drive the boat in Florida?
Thanks for the video super informative. How does the switch perform in the ocean? I am down in south Florida and want to get one
When Bimini is down what is the height from concrete to the top of the Bimini in the closed position. Could it be stored in a garage with 8’ high door? How easily could you remove the swim platform. My garage is 21’ deep with garage door closed. My thoughts were to purchase an 16’ + the 2’ swim deck. When store it at the house I would take off the swim platform and store it.
Nice video!! I like that you covered more practical info as an owner. How much garage space is needed for your 21’ height, length and width?
Good review Thank You Sir
I am considering this boat. Is there a portable head enclosure accessory for the 21 footer limited?
what do you do if you just want a slow cruise? does it have a cruise control?
Since you have experience with both the Yamaha jet boat and Sea Doo switch, I'm curious what your thoughts were comparing the two, pros and cons. I'm considering one or the other as well!
Can you run that motor at a slow trolling speed like 1-2 mph without damaging the engine after trolling
Really good review. Thank you. :)
Very interesting. I’m going to buy one tomorrow. The 21’ 170 hp paying 44k
I was just quoted $35,000 for a 2023 Sea Doo Switch Cruise 18 50PA 230 hp caribbean blue
@@fhhomesforsale Stop with the lies...FOH.
Great overview! Would you buy it again?
Hey there, I own the 21 230 Cruise. You said something about a Tune available for the 230?? Where would I get this?
reliabletuning.com/product/230kit/
@@francophoto219 I noticed it said RTX 300. Is that correct? Even though I have a 230 Supercharged??
@@c.juneau410 I would call them but from I know it’s the same ACE 1630 motor that’s in the 100hp all the way up to the 300.
Only difference is the way they are tuned and wether or not it has a supercharger on it or not.
@@francophoto219 ahh I see. Awesome thanks so much
How’s your experience been after 1 year of owning the boat?
This is an amazing video man, you’re a true well spoken trainer. You killed me when you said the last thing you wanna do is get stuck stranded on a boat with your family, or alone or ever LMAO.
Thanks! That was very helpful!
Q: I noticed that you are a bigger guy. I’m interested in this as my son pushes 350. Is there a weight limit listed for the deck, not the overall carrying capacity, but a psi or psf limit? The two storage access points (storage and engine compartments) have a plastic bridge at the outer edges. It doesn’t look like there’s anything except the cover that spans the center of the panel.
Great vid bro. Much obliged.
I have met a few people on the lake with these. So far not a one is happy with them for overall performance. Look great though. Jury is still out.
Very good video, thank you.
Thank you for the information. I have been looking into these and noticed to out fit ine it is very expensive. Then the added "commodity surcharge...1400. So I am just learning about them but it appears to get very expensive fast. Are you able add additional lights and such easily? Can wire be run as needed. Regular pontoon boat stupidly easy. Thanks again. Kind of like an expensive bobber, lol
Have you looked into the engine gateway and NMEA 2000 in order to unlock all the engine data with the Echomap 72sv chart plotter?
Great video would you still
Recommend it as a boat now you’ve had an almost a year?
Thanks in advance legend
Make an updated video on the water. Thanks for the video
Thanks for the video and your honesty.
How does it handle in say, 5ft waves?
Just bought a 24 foot by 8.5 foot Tahoe tri-toon with a 200 horse Suzuki, and performance lifting fins, for 55K including the trailer, tax, and everything. I don't really see why people would by this for nearly 50K! That is crazy.
Because it is ugly, overpriced, and does not have half the options, or do half the things this Switch does. I wonder how you feel a year later, now knowing you wasted $55k, for a boat that's worth $27k now.
@ you’re dumb. My boat will sell right now for more than I paid for it.
Great video- how is the switch in shallow water? We're looking for something we can launch from the shore into a lake.
why tape reverse lockout in? You have a truck w/ 7 pin connector, this has a reverse lockout pin. When in reverse (with trailer harness connected), it triggers a solenoid on trailer to lockout surge brakes.
Where did you get the front bumper pads at
I don't see the links you described.
Thanks Bro. You just saved me $30,000. What a bunch of hassles, unique to this design. I’ll take an old wood diesel boat, a can of varnish and a bilge pump. Toilet and small frig. $12,000 no problem.
Q: Could this boat (The smallest version) be considered as a yacht tender? Replacing a dingy... Or are we talking only for the bigger size yacht's?
I bought a switch and I am trying to get my boat lift reconfigured to fit. The Hewitt lift dealer is trying to help me get the right bunks and configuration for it but seems to be strugging a bit. Did your neighbor across the street with the lift have any trouble with this? Thanks
What does the speakers look like can you send a link so I can find them?
Can you use these in salt water?
Do you have a link for your boom boxes?
Great video, you answered all my curious questions about your unusual boat.
What happened to the Yamaha 195 you bought last year?
i traded it in for this one. we had lots of fun on the yamaha and its served us well but this boat suits our needs better.
Fantastic video dude. Curious as to how the motor and seats are holding up, and what type of water you are using it in. My last seadoo boat ran with little issues on the banana river which is brackish water. When i moved to north tampa i feel like tge salt content in the watee hammered the seat materials and motor.
I was just quoted $35,000 for a 2023 Sea Doo Switch Cruise 18 50PA 230 hp caribbean blue is this a fair price?
Thought this boat has a reverse. If so why can’t your friend back up in his dock?
I just bought one and still learning
50 degrees is not cold it’s perfect weather in NYC 😊
What about a similarly priced pontoon boat? I feel like the quality of regular pontoon boats is much better.
I'm surprised your truck doesn't come equipped with both types of pin connections. I know my Chevy has both.
Could your neighbor back into the lift? I guess it would just depend on the style of lift. It does suck that the top cant be folded back as well.
Have you had wet kids coming in & out of the boat yet? Curious about how slick the flooring gets as well as where all that water drains to…does water end up in your engine compartment?
Thanks good learning
If you have the trailer wire connected it disengages the brakes when you’re in reverse so you don’t need any kind of tape or whatever you’re doing that I mean, I know it’s like a year ago so I’m sure you probably figured this out by now, but I don’t know how somebody doesn’t know that
the first thing I thought of when seeing the switch is like Windows for your PC. It is a "platform" that will allow 3rd parties to create all sorts of cool add ons.
Personally, I am working on a water cannon to lock into the deck!!!!!!
Nice boat!
Great video, I’m thinking about getting the 18’ so it will fit in my garage. I too was looking at the Yamaha 21 but too expensive. Anything about the switch I should consider before purchasing?
Height! 8 1/2 feet with the Bimini folded down!
Switch owner in central Florida here. Curious how often you cross paths with
other Switch boats? Personally know someone with one on the Winter Haven
chain of Lakes nearby myself a few miles away. Met someone with this boat
up at lake Minneola three or so months ago. One other occasion that escapes
me. We have the 13 foot sport. We definitely have the same thoughts and
opinions overall. Kind of conflicted because on one hand buying something this
new you have to deal with the flaw designs that will probably be corrected.
On the other hand I doubt my cost with price increases would make me all that
happy had I waited for a better overall product. We have had some nice times
with it . But I wish I knew beforehand how easily the jet boats will damage
if you are not really cautious around shallow water. Hard lesson learned there.
if your switch yellow ? i think i came across you on lake minneola lol
gotta watch the shallow waters for sure.
i installed the garmin transducer for depth reading but sometimes its too late and your already in the shallow before the reading hits.
@@francophoto219 it's blue.... Yeah just seconds before we grounded we were reading about 5 to 7 feel
So you strongly recommend a second battery eh?
What part of Florida do you live in? Thx for the great video...
great video man. Thank you
What speakers did you buy? & do you still recommend them?
sound core is what he mentioned…
Did you trade in your Yamaha ? I have a 19 foot Yamaha that I’m interested in trading for the sedoo switch cruiser
yes i traded it in. the switch is better suited for my family
Good job ! Helpful
Great video! How is the ladder and access into the boat from the water? Is it functional and comfortable? I only see one handle to get up out of water and was curious. Thanks!
50 cold are you mental thats comfy as hell
Flatlanders
They need to make swivelling fishing chairs for the thing too.
Center console