@@Rickygn1 Service mode: 1. With key in press the on button, do not start the engine. 2. Hold brake until IBR override pops up. 3. Continue holding brake, press mode and then the up arrows until bucket is all the way up.
@@ozzysautorepair351 I would recommend to reach out to leading edge impellers. To my knowledge if your above x amount of level the impeller needs to be pitched a certain way.
Call LEI and speak with David, he can make sure you order the correct kit. I'm in Idaho and the lakes are anywhere from 2000 to 3000 foot in elevation which matters when it comes to calibrating the pitch for best performance.
Great video my Switch 170 just ate some rocks can you drop the part no for your solas I can't find them online anywhere for the 23 switch 170 did you call them or ordered online from a vendor ?
What was the pitch LEI sent you? I have a 23 Sport compact 13' and he sent me a 11/19a and I have a HP tuner 8300 rpm limiter but can't get past 7200 looks like he pitched it to . Putting in a 10/18A and will test later11/14 with my WATCON gauge
@@EndlessRoutes He tried to pitch an 11/19A into a 11/14 which you can only go 1 +/- 1 degree. I will post results with 10/18A in a couple weeks when I get back in town. FYI reached out several time with crickets .
Service mode: 1. Key in 2. Press on button-do not start engine! 3. Hold brake until IBR override pops up and press mode. 4. Continue holding brake and press the up arrow until it’s all the way up. I will make a video for this
@@ozzysautorepair351 might be an altitude issue that requires a specific pitch Might wanna have a professional check it out When you figure it out lemme know I’m interested in what could be causing this
Thanks for sharing Over all the performance gained was 2mph and more acceleration/ torque It’s worth the upgrade in my opinion when a new impeller is needed
Why do I get the impression that your wife should be performing this repair? Perhaps Not over explaining the obvious would make this a better video. If your viewers need to be spoon-fed every little detail perhaps they should let someone else do this job.
Fun fact my wife is the one who encouraged me to create this video. Maybe some people like myself need to be spoon fed information to learn. Teach a man to fish…
Well done! Love the switch
Thanks for such a detailed video. I will be needing to go over this repair soon.
Thank you so much for the donation I can’t thank you enough 🙏
Awesome information on this
I appreciate the feedback
happy to help
Good info thanks for sharing
No problem 👍
I needed this TY!
TY!
Brilliant! Thanks for being so detailed with taking it apart AND putting it back together.
No problem happy to help
Sir, this is the most accurate video. I need to do this to my switch. Now. Thanks soooo much!
No problem happy to help
Thank you so much for making this video! I just got my first boat, seadoo switch, and have recently sucked up a bunch of rocks.
No problem happy to help 😊
I’d done the same thing we live and learn.
Hopefully easy fix
Same here, I paid the dealer over $700 to fix!
Great job on the impeller swap 👍🏻
Thank you 🙏
Great job. Thanks for sharing!
No problem 😉
How do I get the shourd /reverse boot in the down position ? Thanks Harold.
Are you referring to service mode ?
Yes
@@Rickygn1
Service mode:
1. With key in press the on button, do not start the engine.
2. Hold brake until IBR override pops up.
3. Continue holding brake, press mode and then the up arrows until bucket is all the way up.
So, resulting performance improvement?
@@braden2568 more torque and gain of 3mph
Nice video. I have a question. I’m at sea level, but do I still need to get mine specially pitched.
I have the Sea-Doo 2024 230 21’ cruise.
@@ozzysautorepair351 I would recommend to reach out to leading edge impellers. To my knowledge if your above x amount of level the impeller needs to be pitched a certain way.
@@EndlessRoutes great thanks.
Do u have their number
How much of a difference does this make on top and speed? Also, does it make any other difference??
I gained about 2 mph
Acceleration is smoother
Worth the upgrade in my opinion if you need to replace your impeller
@@EndlessRoutes so I started out getting like 42-43MPH on my 21 230 Cruise. Now; it is down to like 38MPH. I’m thinking this is the Wear Ring??
@@c.juneau410 could be I’d recommend when taking it out the water check the impeller take some pictures and check for damage
I’m assuming that you can look at the wring and impeller through the grading underneath the underneath side of the boat?
Let us know how that new impeller works out.
I took the boat out today
All I can say is what a huge improvement
I recommend the upgrade
I am thinking about buying one...... Your thoughts after owning one?
I love my switch
Great boat the whole family enjoys it
Easy to work on and you can change up the floor plans so easily.
What’s the part number or the pitch angles for the custom Solas impeller? Where did you purchase from?
Call LEI and speak with David, he can make sure you order the correct kit. I'm in Idaho and the lakes are anywhere from 2000 to 3000 foot in elevation which matters when it comes to calibrating the pitch for best performance.
Purchased myn from
LEI
Great video my Switch 170 just ate some rocks can you drop the part no for your solas I can't find them online anywhere for the 23 switch 170 did you call them or ordered online from a vendor ?
Leading edge impellers
leadingedgeimpellers.com/solas-switch-impeller.html
What was the pitch LEI sent you? I have a 23 Sport compact 13' and he sent me a 11/19a and I have a HP tuner 8300 rpm limiter but can't get past 7200 looks like he pitched it to . Putting in a 10/18A and will test later11/14 with my WATCON gauge
I’d recommend reaching out to leading edge support to verify correct pitch
@@EndlessRoutes He tried to pitch an 11/19A into a 11/14 which you can only go 1 +/- 1 degree. I will post results with 10/18A in a couple weeks when I get back in town. FYI reached out several time with crickets .
@@DestrokedF250 I’m not sponsored by them or anything I just thought the products
I hope they respond and your upgrades work
how to put in service mode
Service mode:
1. Key in
2. Press on button-do not start engine!
3. Hold brake until IBR override pops up and press mode.
4. Continue holding brake and press the up arrow until it’s all the way up.
I will make a video for this
Where did you get the torc numbers from for the bolts?
Seadoo Manual
@@EndlessRoutes Thanks
I changed mine out and now i have cavitation
Will not move more than 4 mph
I had the stainless steel solas impeller and heavy duty wear ring installed with new upgraded pump asmbly.
You did the repair and you can’t go faster than 4mph or you gained 4mph ?
@@EndlessRoutes having cavitation. 20mph @7,000 rpm
@@ozzysautorepair351 might be an altitude issue that requires a specific pitch
Might wanna have a professional check it out
When you figure it out lemme know I’m interested in what could be causing this
Where did you get your impeller from.
Leading edge impellers
“This $25 vise from Amazon was a great purchase “ the next clip “this $25 vise sucks”. Story of my life. Think I’m winning until reality hits me lol
😂 imagine how I felt in the moment 😂
Great video, but what would be better is also a before and after performance comparison...
Thanks for sharing
Over all the performance gained was 2mph and more acceleration/ torque
It’s worth the upgrade in my opinion when a new impeller is needed
@@EndlessRoutes thanks for your reply!!!!!
12:50 sorry for laughing at your troubles
😂 don’t worry I was laughing inside to
I was just quoted $35,000 for a 2023 Sea Doo Switch Cruise 18 50PA 230 hp caribbean blue is this a fair price?
How many hours ?
I consider that a fair price.
The switch is a great family boat and hold their value.
@@EndlessRoutes new no hours.
I'm paying 39k for a 21'
I’m sure seadoo has some specialized tools for this and other repairs. Anyone know? This job took a rental place less than 2 hours.
The piece to get the impeller off is a specific seadoo tool
Bolt an out drive back in place and that switch will move!
Why do I get the impression that your wife should be performing this repair? Perhaps Not over explaining the obvious would make this a better video. If your viewers need to be spoon-fed every little detail perhaps they should let someone else do this job.
Fun fact my wife is the one who encouraged me to create this video.
Maybe some people like myself need to be spoon fed information to learn.
Teach a man to fish…
@@EndlessRoutesi think it was great..! And it was Great you and your wife well together..!
TY!
Np 😉