WHAT YOU NEED TO KNOW ABOUT YOUR SOFT WASH SYSTEM! COMET P40 OFFICIAL “HOW TO MAINTAIN” VIDEO
HTML-код
- Опубликовано: 16 сен 2024
- COMET P40 MAINTENANCE VIDEO | COMET P40 PUMP SOFT WASH SYSTEM MAINTENANCE VIDEO FROM THE COMPANY EXECUTIVES! THIS IS AN OFFICIAL VIDEO AND WILL HELP YOU TAKE CARE OF YOUR COMET P40 SOFT WASH SYSTEM!
#pressurewashing #powerwashing #softwashing
Please make sure to like share and subscribe
Thanks for watching and have a blessed day 🙏
TO PURCHASE A HONDA COMET P40 HONDA AR45 LIFAN COMET P40 OR LIFAN AR45 CALL OR EMAIL ME 1-833-37-CLEAN ☎️ littlespressurewashingservice@gmail.com 💻
thank you for this great vedio getting mine next week finally.
Glad it helped thx for the support
Awesome vid!! Thanks for the research, bro!
You bet!
Excellent, i downloaded the video for later reference, thanks ✌️..
Btw, when i plumbed my bypass loop, i installed 2 bulkhead fittings in my water tank, the bypass loops are always submerged in cool water now..
That’s brilliant I appreciate and enjoy the feedback. Glad the video was able to help and thank you for sharing your experience and knowledge with the rest of us. We are like a big family over here.
Just blew the exact O ring right as I was finishing a 28,000 square foot roof. I will be putting a check valve on now 😂
I’m glad this video was helpful for you
I have locally searched high and low for this particular check valve and cannot find it anywhere.. I'm running a p-40 on my soft wash system with a metering system and the hydromixer xl.. my hose running to the real has blown off a few times already now. I sure would love to know where to get this elusive check valve you speak of.. 😁
When did they beef up the manifold and how can you tell if you bought the one that's beefed up, since we don't know how long they've been sitting on the shelf before it went out the door?
I will make some follow-up videos on this system and more
Great video 10/10👍
I really hope this helps a lot of people
Thanks for sharing. I was about to attempt to change my oil. Got about 400 more hours 😂
I’m glad we could help
Very informative
I try my best to always deliver for you all
Thanks!
Thank You
Wish they made a bypass for this like they do with the pressure cleaning pumps
Yea a lot of People say the same thing
Any recommendation on the 300psi check valve? I actually had the oring bump out with pressure spike by not holding the gun when turning it off.
And thank you for the good information.
No but that’s a really good idea I’m going to look into it and maybe put something on my new website that’s about to launch
Any updates on the check valve ?
US plastics:
3/4" FNPT x 3/4" FNPT Series 687 Polypropylene Check Valve with FKM Seals, 1/3 PSI Cracking Pressure & 302 SS Spring
@Squish he said minimum of 300psi
Where do we get this check valve? I've searched everywhere and cannot find a 3/4 300 PSI check valve it doesn't exist
Have you tried panhandle or Power Wash store or any place like that?
How can we tell which P40 pumps have the beefed up manifolds? Is there a serial number range to look for or a revision number?
Great question buddy and I’ll email and get that answer
So going to a 24 volt system instead. This sounds like a nightmare.
We are running both of them
Wish it came with pressure gauge on regulator like ar how do u properly set psi?
You can always set one up on your unit to keep a check on things ,matter of fact I think Comet even recommends it
I was considering a p40 but they sound like an absolute ball ache
Yea but you don’t have to change oil until at least 500 hours or more according to experts
BVG 👏
Salute 🫡
What check valve should I get?
A quick connect, gauge for measuring
Do you carry the check valve
?
I will once my shop we’re building is open this coming year
U sell just the AR 45 pump and gearbox
Coming to our website Very soon!
www.littlespressure.com
Ok, so let me understand this correctly. 500hrs before the first pump oil change????
If that’s what the technician and Company says, then that would be yes
They also said in the video that you don’t necessarily have to, that’s just a reference point, or suggestion
Sooooo the customer should spend more money on a check valve rather than it be included or corrected? Hard pass for me.
I truly appreciate your feedback 👍
What size check valve do I need?
Depends on The type unit or machine u r operating or building
What a nightmare, these engineers need to finish designing the last 20% of this product, I'll stick w electric.
I agree you should finish a product all the way out
with those procedures all your doing is asking for problems. its a bad design and needs to be simplified.
Thx for the support and feedback
Maybe the factory clowns should stop overfilling the pump and maybe comet should fit a check valve if it's required!
Thanks for the comment and support
More videos to come similar to this