Outstanding! Probably one of the very best youtube intructional videos I’ve seen! Very thorough and precise description and extra effort to make sure the Camera Angels are helpful. I’m about to do this procedure today, so I very much appreciate the effort you put into this. THANK YOU!
Im replacing the drivers side headlight on 2012 bmw 535xi. How do i contact you for ll aftermarket parts retailer that you used? Great video@@brownsburg.motorsports
Hey, hope you’re still reading some comments. Very informative video, very much appreciated the thorough guide. My right side xenon is malfunctioning, it works when I start the car and then after a few minutes of driving shuts off, when I restart the car it’ll work again for a few mins and then shuts off again. Rest of lamp (blinker and angel eyes) work as intended. The adaptive headlight control (lights following steering) and xenon are malfunctioning and give errors on the dashboard. Which module would you think needs replacement?
I would say the Xenon module which is the square/rectangle looking module is the one that needs to be replaced! Seems like it works when the module is cold but when you turn on the light it heats up and turns off, most likely some water got in there I would pull it off first inspect it and go from there! Thank you for watching my video!!
@@brownsburg.motorsports thank you for your response, I have since then replaced the xenon bulb and all seems to be working fine. Haven’t had an error on my dashboard at all and the lights and adaptive functions as it should. I’m still a bit confused why a burnt out xenon bulb would case the adaptive lighting error, but atleast it’s fixed now. With xenon module I’m assuming you’re referring to the ballast?
This video is amazing. THANK YOU for taking the time to carefully explain each step. I am getting ready to replace LH headlight on a 2013 528i xDrive and will follow the process you have outlined here. If possible, please post links to aftermarket headlight and modules you have used in this video. Thanks again.
Thank you so much!! If you could text me on TikTok or instagram I can try and get you the links if they’re still available or help you look for the right ones!
How’s it going , I have a 2015 550i and my front left headlight is giving me issues now. I had condesation in it and it worked then eventually stopped working. I’m trying to figure out if I need to replace the whole headlight or just the control module and maybe a bulb? I have a few codes but the adaptive headlight malfunction pops up first. My halos work but aren’t as bright as my other side? Any advice?
If you see condensation inside you have two options! Either you replace the headlight or rebuild yours as in take the front lenses off and reseal it! As for the modules I would recommend replacing all of them just so that you don’t have to do it twice!
I need advice on replacement of the Headlight Washer Cover and the Hinge/Spring that connects to the Front Bumper cover? It's 2014 F10 535i xdrive. A deer hit it. But also the washer nozzle now moved forward also. I do need a washer nozzle as it's missing the nozzle tip. I compared it to the drivers side. I didn't want to do a claim on this, because parts are reasonable. Thanks. Duane, MI.( I have the plastice hinge but that's all broken that connects the cover and to the bumper.) Thanks for your time and help. I can't locate no info on this.
@@duanecummins9516 I would recommend going on realoem.com enter the last 7 of your vin number and it will give you a full blown out diagram that way you will be able to tell what you’re missing and how they are installed together if you need further assistance contact me via instagram or TikTok (in the description)
Hello and thank you for your detailed and clear help! I have a 528xi 2013 bmw and I need to change the driver’s headlight. Would love to bring the car to you. Where are you located? Thank you!!!
On my original Head Light there is some gooey gasket materiālu around the base of the halo module. I noticed that when you installed the halo module, there was no such gasket. Is that Ok? Or should I be sealing it somehow?
The halo module should have a rubbery white gasket that comes with it if yours doesn’t have it I would recommend sealing by either getting the gasket online or with some Windshield Gasket sealant, apply it around the module and then install it but would definitely recommend getting the new gasket for it instead
i have a 2015 528i xenon adaptive headlights, i have to replace both. Can your friend give the web page of ordering parts for 1,700 that included all the modules. I cannot find part numbers for the angel eye modules, turn signal modules.
Hi tnx for the guide.I was having a mayor problem with the angel eyes modules small connector how to get it out. I still dont know how to get it out, i massacred it to get it out. Fortunetly all is working.
@@ChuiVision they are the adaptive ones! And if you are doing the DIY make sure you use automotive grade clear silicone to seal the halo modules I didn’t include the part In the video but it’s vital 🙌🏽
I need your assistance! I have a 2011 535i Xdrive when I first purchased from dealership the detail guy there had it for 2 days I go to pick it up the headlight was full of water broke the seal and they wouldn’t replace. My turn signal and daytime lights didn’t work. But high and low beam worked I had rats crawl into my engine chew through wires it was in the shop for 7 months. The driver headlight with issues now no lights work but my right side headlight that has no issues all the lights work but the right side turn signal isn’t working either. The turn signal lights up but idk if it’s a bulb issue or module would I be able to send you pics and u let me know what my options are! Ik for sure I need a new driver headlight but all the lights work on the other and the seals are still good. Is there any more parts I need to order for the headlight then what’s linked below in the description?
@@MASTERMIKEEE I just added the link in the description for what I recommend using! Any electronic cleaner you can pick at the local parts store or from Amazon, spray it on the connector let it sit for 3-5 seconds and brush it with a tooth brush then run some air through it with an air gun or spray to dry it off and get the corrosion off
@@brownsburg.motorsports It’s okay to clean with a brush as long as the battery is disconnected? Also was your fuse blown? My corrosion looked just like yours.
@@brownsburg.motorsports ok check this out - put everything together and the corroded side still didn’t work!! After hours of troubleshooting, I realized the left and right assembly’s have the same power connection; just inverted. So I connected the (known good) right side assembly to the (unknown/not working) left power plug. It worked!! This seems to confirm that the new headlight assembly is not working, right? And then to double check, I tried the (apparently broken) assembly on the good power cable, and it still did not work! Planning to return it and get a replacement.
@@MASTERMIKEEE nice troubleshooting steps 🙌🏽 did you replace the TMS or just the assembly? TMS could also be the culprit I have ran into that before 🥲 you could swap the TMS from the good headlight that’s working to the one that seems to not be working and test again on the side with the corroded plug and see if it works if it still doesn’t the get a replacement but If it does work then get a new TMS just make sure they have the same amount of prongs because there are multiple ones!
@@sawomir6037 are you talking about replacing the bulb through the wheel well? Because as far as replacing the headlight you can’t remove it without taking the bumper off
I have a 2012 bmw 528i xdrive and my whole driver side headlight is out. Nothing works not even blinker. I just replaced the bulb and still nothing. Do you have any idea? Thank you
@@GSXRJAY on the back of the headlight there is a connector like a plug basically, plugs into the back or the headlight distributes power to the bulbs and module inside the headlight, take a look at it and see if it has any whitish blueish reside, connecter should be rectangle
The lights turning right and left as you’re turning the steering wheel are called AFS or Adaptive lights the one in the video is adaptive but be aware that some models didn’t come with AFS/ Adaptive feature
@@brownsburg.motorsports I have a 2012 bmw 535i and the adaptive headlight malfunction light keeps going off and on. When it goes on the lights don't turn left and right. When the light goes off they work fine. I was getting moisture in the driver's light but I figured out the access door was open and I closed it. The malfunction light was just going on when moisture was in there and it would dry and be fine . Now it just going off and on. Id love to know what controls left and right turning so I could pin point and fix the issue.
@@heatherhoyt3922 so the issue with this is the TMS module getting moisture on it and burning out unfortunately even if you replace the TMP and replaced the seals on the headlight the internal connectors are the ones that gets corroded and eventually short out which will cause the issue you have. I have seen so many symptoms and it’s definitely worth it to just replace the headlight with the modules
I just installed aftermarket assemblies and nothing in them works, so obviously they need to be programmed. I called everywhere and they all say they can’t do it so do you know what scanner I need to use to program/initialize them? Thanks
@@brownsburg.motorsports I recently replaced mine too but the highbeam and the angel eyes don't work, does it have to do with initialize? Low beam is fine
Impressive video! Thank you for publishing it. If the left turn signal, angel eye and/or headlight aiming system generate error message(s) every few months, does that mean there is moisture in the connector at the back? Is there any way to remove the water and seal it, without having to remove the bumper? Thank you..
@@ralphtrott341 you gotta open the halo module pull it a little bit and then pull on the connector itself it doesn’t have a tab it just fits there tight
it only needs basic programming any shop can do it and it shouldn’t more than 150 at most!! It’s literally a basic hot function for the headlight autel scanner does it even the cheaper ones that runs 300/400 dollars
@@ImStep-by-Step if you use all new modules but using the same TMS you shouldn’t need to program anything, programming/initialization is only needed if you replace the TMS
@@stephenkocynski7911 that’s exactly what needs done! I didn’t include that part in the video but I would recommend automotive clear silicone you could pick up in O’reilly or AutoZone
This video is amazing. THANK YOU for taking the time to carefully explain each step. I am getting ready to replace LH headlight on a 2013 528i xDrive and will follow the process you have outlined here. If possible, please post links to aftermarket headlight and modules you have used in this video. Thanks again.
Outstanding work. Thank you for taking the time and breaking down this complex process for your audience. Greatly appreciated!!
@@hatimsalih24 thank you 🙌🏽🙌🏽
Very helpful to know I need to take it to a shop instead of doing it myself!😂
😂😂 if you get few tools from harbor freight you sure will be able too!!
@@brownsburg.motorsports your camera doesn`t show everything you doing 👎
Outstanding! Probably one of the very best youtube intructional videos I’ve seen! Very thorough and precise description and extra effort to make sure the Camera Angels are helpful. I’m about to do this procedure today, so I very much appreciate the effort you put into this. THANK YOU!
Thank you so much for watching! I am super glad the video was helpful!!
Im replacing the drivers side headlight on 2012 bmw 535xi. How do i contact you for ll aftermarket parts retailer that you used? Great video@@brownsburg.motorsports
@@frankplayz1462 everything is in the video description 🙌🏽
Hey, hope you’re still reading some comments. Very informative video, very much appreciated the thorough guide.
My right side xenon is malfunctioning, it works when I start the car and then after a few minutes of driving shuts off, when I restart the car it’ll work again for a few mins and then shuts off again. Rest of lamp (blinker and angel eyes) work as intended. The adaptive headlight control (lights following steering) and xenon are malfunctioning and give errors on the dashboard. Which module would you think needs replacement?
I would say the Xenon module which is the square/rectangle looking module is the one that needs to be replaced! Seems like it works when the module is cold but when you turn on the light it heats up and turns off, most likely some water got in there I would pull it off first inspect it and go from there!
Thank you for watching my video!!
@@brownsburg.motorsports thank you for your response, I have since then replaced the xenon bulb and all seems to be working fine. Haven’t had an error on my dashboard at all and the lights and adaptive functions as it should. I’m still a bit confused why a burnt out xenon bulb would case the adaptive lighting error, but atleast it’s fixed now. With xenon module I’m assuming you’re referring to the ballast?
@@bruciekibbutz4698 yes I Am! I am glad it’s working now!!
This video is amazing. THANK YOU for taking the time to carefully explain each step. I am getting ready to replace LH headlight on a 2013 528i xDrive and will follow the process you have outlined here. If possible, please post links to aftermarket headlight and modules you have used in this video. Thanks again.
Thank you so much!! If you could text me on TikTok or instagram I can try and get you the links if they’re still available or help you look for the right ones!
Thanks for the great video! Is it possible to replace only the turn signal module without removing the entire headlight?
Thank you 🙌🏽🙌🏽 I believe the headlight will have to be removed to gain access to the turn signal module ☹️
How’s it going , I have a 2015 550i and my front left headlight is giving me issues now. I had condesation in it and it worked then eventually stopped working. I’m trying to figure out if I need to replace the whole headlight or just the control module and maybe a bulb? I have a few codes but the adaptive headlight malfunction pops up first. My halos work but aren’t as bright as my other side? Any advice?
If you see condensation inside you have two options! Either you replace the headlight or rebuild yours as in take the front lenses off and reseal it! As for the modules I would recommend replacing all of them just so that you don’t have to do it twice!
I need advice on replacement of the Headlight Washer Cover and the Hinge/Spring that connects to the Front Bumper cover? It's 2014 F10 535i xdrive. A deer hit it. But also the washer nozzle now moved forward also. I do need a washer nozzle as it's missing the nozzle tip. I compared it to the drivers side. I didn't want to do a claim on this, because parts are reasonable. Thanks. Duane, MI.( I have the plastice hinge but that's all broken that connects the cover and to the bumper.) Thanks for your time and help. I can't locate no info on this.
@@duanecummins9516 I would recommend going on realoem.com enter the last 7 of your vin number and it will give you a full blown out diagram that way you will be able to tell what you’re missing and how they are installed together if you need further assistance contact me via instagram or TikTok (in the description)
Hello and thank you for your detailed and clear help! I have a 528xi 2013 bmw and I need to change the driver’s headlight. Would love to bring the car to you. Where are you located? Thank you!!!
Thanks a lot for your comment! We are located in Indianapolis IN message me on insta or TikTok for more details if you would like!
On my original Head Light there is some gooey gasket materiālu around the base of the halo module. I noticed that when you installed the halo module, there was no such gasket. Is that Ok? Or should I be sealing it somehow?
The halo module should have a rubbery white gasket that comes with it if yours doesn’t have it I would recommend sealing by either getting the gasket online or with some Windshield Gasket sealant, apply it around the module and then install it but would definitely recommend getting the new gasket for it instead
Also the gasket on the Halo module should on the inside if that makes sense so around the inner bean where the led dots are placed
@@brownsburg.motorsports Awesome. Thank you - I was trying to reuse the original, but decided to just order all new components like you did!
@@edvinsroze5388 that’s awesome! Definitely the right way of doing it!
Do the 2 angel eye modules and turn signal module require some type of water tight sealant before installation?
They should come pre-sealed with a gasket on em otherwise you can use automotive silicone
Great video. How can i get the aftermarket information from you?
@@frankplayz1462 all the li me are is in the video description 🙌🏽
Is it needed to program the tms module after you replace it?
@@kikokabayanable it’s not programming it’s just initialization that needs done with a professional scanner
i have a 2015 528i xenon adaptive headlights, i have to replace both. Can your friend give the web page of ordering parts for 1,700 that included all the modules. I cannot find part numbers for the angel eye modules, turn signal modules.
Message me on insta or TikTok and I will see what I can do to help 😊
Hi tnx for the guide.I was having a mayor problem with the angel eyes modules small connector how to get it out. I still dont know how to get it out, i massacred it to get it out. Fortunetly all is working.
Sure glad the video was helpful! Thanks for watching! And ye strode connectors can be a pain 🥲
Are these headlights you installed not the adaptive ones?
@@ChuiVision they are the adaptive ones! And if you are doing the DIY make sure you use automotive grade clear silicone to seal the halo modules I didn’t include the part In the video but it’s vital 🙌🏽
I need your assistance! I have a 2011 535i Xdrive when I first purchased from dealership the detail guy there had it for 2 days I go to pick it up the headlight was full of water broke the seal and they wouldn’t replace. My turn signal and daytime lights didn’t work. But high and low beam worked I had rats crawl into my engine chew through wires it was in the shop for 7 months. The driver headlight with issues now no lights work but my right side headlight that has no issues all the lights work but the right side turn signal isn’t working either. The turn signal lights up but idk if it’s a bulb issue or module would I be able to send you pics and u let me know what my options are! Ik for sure I need a new driver headlight but all the lights work on the other and the seals are still good. Is there any more parts I need to order for the headlight then what’s linked below in the description?
Sorry to hear that 🥲 that sounds like so much especially with the chewed up wires and Sure contact me on insta or TikTok
How did you clean that corroded power cable?? Mine is very corroded, and I’m scared to reuse it without cleaning or replacing it!!
@@MASTERMIKEEE I just added the link in the description for what I recommend using! Any electronic cleaner you can pick at the local parts store or from Amazon, spray it on the connector let it sit for 3-5 seconds and brush it with a tooth brush then run some air through it with an air gun or spray to dry it off and get the corrosion off
@@brownsburg.motorsports It’s okay to clean with a brush as long as the battery is disconnected? Also was your fuse blown? My corrosion looked just like yours.
@@MASTERMIKEEE yes you do all that with a disconnected battery! My fuse was intact 🙌🏽
@@brownsburg.motorsports ok check this out - put everything together and the corroded side still didn’t work!! After hours of troubleshooting, I realized the left and right assembly’s have the same power connection; just inverted. So I connected the (known good) right side assembly to the (unknown/not working) left power plug. It worked!! This seems to confirm that the new headlight assembly is not working, right?
And then to double check, I tried the (apparently broken) assembly on the good power cable, and it still did not work!
Planning to return it and get a replacement.
@@MASTERMIKEEE nice troubleshooting steps 🙌🏽 did you replace the TMS or just the assembly? TMS could also be the culprit I have ran into that before 🥲 you could swap the TMS from the good headlight that’s working to the one that seems to not be working and test again on the side with the corroded plug and see if it works if it still doesn’t the get a replacement but If it does work then get a new TMS just make sure they have the same amount of prongs because there are multiple ones!
Why didn’t you replace it like any normal person would, from underneath through the wheel well, using the designated access panel?
@@sawomir6037 are you talking about replacing the bulb through the wheel well? Because as far as replacing the headlight you can’t remove it without taking the bumper off
How much $ was the new headlight?
Low end $1000
these are the cheap ones my adaptive led is $3000 per headlight😔
I have a 2012 bmw 528i xdrive and my whole driver side headlight is out. Nothing works not even blinker. I just replaced the bulb and still nothing. Do you have any idea?
Thank you
If nothing working then I would check the power coming at the connector and I would check also for any corrosion on the connector it self!
@@brownsburg.motorsports by “connector” do you mean the control module?
@@GSXRJAY on the back of the headlight there is a connector like a plug basically, plugs into the back or the headlight distributes power to the bulbs and module inside the headlight, take a look at it and see if it has any whitish blueish reside, connecter should be rectangle
Is the tms module that ones that controls the led turn signals?
TMS Module is what controls everything except low beam and high beam!
Can I ask whatidule controls turning the lights left and right as I drive?
The lights turning right and left as you’re turning the steering wheel are called AFS or Adaptive lights the one in the video is adaptive but be aware that some models didn’t come with AFS/ Adaptive feature
@@brownsburg.motorsports I have a 2012 bmw 535i and the adaptive headlight malfunction light keeps going off and on. When it goes on the lights don't turn left and right. When the light goes off they work fine. I was getting moisture in the driver's light but I figured out the access door was open and I closed it. The malfunction light was just going on when moisture was in there and it would dry and be fine . Now it just going off and on. Id love to know what controls left and right turning so I could pin point and fix the issue.
@@heatherhoyt3922 so the issue with this is the TMS module getting moisture on it and burning out unfortunately even if you replace the TMP and replaced the seals on the headlight the internal connectors are the ones that gets corroded and eventually short out which will cause the issue you have. I have seen so many symptoms and it’s definitely worth it to just replace the headlight with the modules
I just installed aftermarket assemblies and nothing in them works, so obviously they need to be programmed. I called everywhere and they all say they can’t do it so do you know what scanner I need to use to program/initialize them? Thanks
Sorry to hear that 🥲 autel Maxisys Will be the scanner to do the job!
@@brownsburg.motorsports I recently replaced mine too but the highbeam and the angel eyes don't work, does it have to do with initialize? Low beam is fine
@@Bossy23 yes initialization is an important step to make sure everything is working properly!
do you have links for the aftermarket parts?
Dm on instagram or TikTok!
Impressive video! Thank you for publishing it. If the left turn signal, angel eye and/or headlight aiming system generate error message(s) every few months, does that mean there is moisture in the connector at the back? Is there any way to remove the water and seal it, without having to remove the bumper? Thank you..
Does a snap on scanner work to initialize??
Yes it should be under hot functions
How do you remove wiring clip from old angel eye?
@@ralphtrott341 you gotta open the halo module pull it a little bit and then pull on the connector itself it doesn’t have a tab it just fits there tight
Mine seems very tight. No tab or clip? I don't want to break the receiver portion. Do you remove the Torx bolt and remove the black LED cover?
@@ralphtrott341 yes all 3 torx screws all of them are tight so don’t worry about breaking it that’s just how they are unfortunately 🥲
@@brownsburg.motorsports Not those screw. The plastic plug with wiring that powers Angel Eye
will not come out of the black socket. That's my problem
If you could tell me how to disconnect that wiring it would be very helpful
How much would you charge for this?
@@topnotch585 this job can go anywhere from $1200 to $5000 depending on where you get the parts Original or aftermarket 🙌🏽
Do i need to change out componentshow much do people charge to program the brain
it only needs basic programming any shop can do it and it shouldn’t more than 150 at most!! It’s literally a basic hot function for the headlight autel scanner does it even the cheaper ones that runs 300/400 dollars
I’m going to use the old parts hoping to avoid having to reset. It’s been the hardest part at this point. That gooey sealant is a pain.
I’ll add the condensation on the old one was the culprit but cleaned up the connector - fingers crossed
@@ImStep-by-Step if you use all new modules but using the same TMS you shouldn’t need to program anything, programming/initialization is only needed if you replace the TMS
@@ImStep-by-Step hope it works for you 🤞🏽🤞🏽
@@brownsburg.motorsports thanks! Had to pause and order new HID - appreciate the info too!! Great channel
@@ImStep-by-Step alright!!! Hope it works well for y’a if you have other questions feel free to reach me on TikTok or instagram! Thanks for watching!
I would have some sealant around the modules.
@@stephenkocynski7911 that’s exactly what needs done! I didn’t include that part in the video but I would recommend automotive clear silicone you could pick up in O’reilly or AutoZone
I used butyl tape that I got on Amazon. I folded the tape, rolled it in my hand to make it round, and placed inside the groove.
@@stephenkocynski7911 that’s genius🙌🏽
lol yeahhh I’m taking it to the shop 😂they charge me $350
No good. I see missing gaskets.
This problem just happened to my 2016 535. $2500!!! Yikes!!
And note to self…. Keep the car in the garage in the winter, dummy!!!!
This video is amazing. THANK YOU for taking the time to carefully explain each step. I am getting ready to replace LH headlight on a 2013 528i xDrive and will follow the process you have outlined here. If possible, please post links to aftermarket headlight and modules you have used in this video. Thanks again.
You are most welcome! I am happy the video was helpful! Text me on TikTok or instagram and I will find the links for you!