FA20 CLOSED DECK BLOCK and 2015 Subaru WRX gets the 2018 front end update!
HTML-код
- Опубликовано: 15 окт 2024
- The Loud AF 500 2015 Subaru WRX gets the 2018 front end update with extras and Turnin Concepts CLOSED DECK Be-spoked Block option with 14mm RCM studs!
IG: nosubswrx
turninconcepts.com
johnsontuning.com
******* Where I got my mods ********
www.newprovisi...
3 D Zero WRX Parts List:
***** PERFORMANCE MODS *****
FP Blue Turbocharger External Wastegate
-FP FA20 Silicone Inlet Pipe Kit
Killer B External Wastegate headers w/ 38mm Tial Wastegates
Invidia Gemini (R400) Single Layer
Cobb SF intake
Cobb flex fuel
GrimmSpeed 3-port ebcs
Tial QRJ
ETS FMIC 4" CORE W/ BRZ MANIFOLD PIPING
IBR BRZ MANIFOLD KIT W/ RED TOP MANIFOLD
IAG AOS
Killer B catless Jpipe
DW300 fuel pump
Perrin Oil Cooler Kit
**** Suspension Mods ****
HKS Hipermax GT
Whiteline Roll Center and Bump Steer Kit
Whiteline Rear Toe Arms
RCE front and Rear Sway Bars
Soul Function 3-POINT FRONT SUBFRAME BRACE
CUSCO POWER BRACE REAR MEMBER SIDE
CUSCO REAR CROSS BAR
Cusco Front Lower Arm Bar - Part No. 684 475 A BENT TO FIT
KARTBOY FRONT AND REAR ENDLINKS
**** DRIVE TRAIN ****
2018 STi TRANSMISSION 8K MILES
KARTBOY SHORT SHIFT AND ALL BUSHING
BEATRUSH REAR DIFFERENTIAL TENSION BAR
SUBARU GROUP N TRANSMISSION MOUNT
WHITELINE GEARBOX POSITIVE SHIFT KIT
PERRIN ENGINE MOUNT KIT- 02-20 WRX/STI
PERRIN PITCH STOP MOUNT BLACK
PERRIN PITCH STOP BRACE
MOTUL 300 75W90
COMPETITION CLUTCH TRIPLE DISK
***** BRAKES *****
2018 STi 6 POT BREMBOS
HAWK 5.0 PADS
STOPTECH SS LINES
RADIUM BRAKE BRACE
MOTUL 5.1
Where is this guy at? We need more content.
That new block is gonna be gnarly! Congrats man. Cant wait to see the dyno.
Welcome back man, that block will be great. I just finished the break in on my IAG extreme block with built heads, and we have pretty much the exact same setup down to the BRZ manifold. Looking forward to more uploads!
Sheesh 😎 motec,Custom headers,garrett turbo custom, this shit a wild FA20 build
I was a bit nervous pushing power with an e60 tune but your power and stock motor has reassured me a bit lol
Was baffled when I saw the video open on 129. Fairfield gang baby
I’ve been watching your videos for the past hour. Glad you said to subscribe because I never think too🤣
Also, I’m about to take my 2015 wrx with about 120k on it to Turn in concepts as well here soon. Hopefully my car shows potential and isn’t a lost cause. Glad I watched your videos so I now know that Corbin and the turn in team are some top notch guys!
Was the front bumper a direct replacement or was there some modifying done to make it fit? Love the way it looks!!
I'm getting my 2015 WRX E85 tuned at turn in concepts soon!
Yoooo you are finally building her!! So excited
hey! I haven't seen any videos lately on the WRX, is everything ok with the new block? I have an IAG stage 2 being installed, so wondering how your car is running.
Love this channel! Has anything happened to the stock engine that you need to do a built block?
Nice rex.
Question. I noticed your mods list doesn't have EGR and TVG deletes. Is there a reason why? The reason why I ask is because I live in a state that can be iffy with inspections. I want to minimize the carbon buildup with just an AOS and drop temps with FMIC. I'm even considering meth.
Sorry so long, but not a lot of people have a setup as such.
BTW, subscribed.
Glad to see another video. That motor is gonna be awesome!!
I was just thinking about your channel and build, excited for you! Looking forward to see how this goes. Im finally ordering some parts this week. Going fmic, installing tgvs, ebcs, AOS and oil cooler and getting tuned 😎
Might want to look into fueling my guy, according to many tuners and guys I know with our cars have told me the direct injectors runs out of fuel a little over 400whp, and from what ive gathered the only proper fix to that is a motec standalone ecu and port injection with the direct injection. Just a thought, dope car though bro!
IBR is releasing another option for port injection for our FA's.
IBR has a port injector controller that works with the BRZ intake manifold and is much much cheaper than Motec.
Sick dude. Looking forward to more videos. How do you keep your oil temps down so low?
Bro nice project can you send me the list of your mods I’m on stage one and I want to go the same way like your build.
Let’s see some new content! I would love to have this setup.
Can you make for me and let me know how much you charge on with shipping.. for rear control arm cover .
How'd you keep your coilover dampening adjuster screws from rusting on the fronts? Mine rusted first year. Took it through the wash 1 to 2 times a week or after heavy snow/salts
thats crazy man this is one of the few 2015+ wrx ive seen that has pretty much everything power you can do for a wrx Ive heard people having to move onto port injection if they wanna make more power, is that true ?
What kind of front lip do you have? I love it!
Love this build!!!
Nice set up! Will the factory 18in rims fit over the 6 pot calipers?
How’s the car? How much wheel you at now?
Also do you have the nostrum hpfp?
When is the new video coming
How do you like turn in concepts tune.
I live in Dayton currently and am
Debating on going
To them.
Lord.
yooooo where u get the rear gloss black diffuser? not the bottom 1. the stock 1 painted gloss black. or did they paint that too?
I used the nostrum hpfp with the radium fpr surge tank with a walbro 450 single pump to run strait e85 without any issues for my daily driver. I don't track her so I don't have issues with the surge tank emptying out before my intank pump "dw300c" not catching up. I'm interested in what you do.
Are you still using the nostrum HPFP?
How much power will it make?
Badass
Welcome back man, that block will be great. I just finished the break in on my IAG extreme block with built heads, and we have pretty much the exact same setup down to the BRZ manifold. Looking forward to more uploads!