@@BDPerformanceWrexham great video guys, I'm looking at changing my stock shocks and springs or my focus rs mk2, will I need adjustable camber arms or will it be OK if I only change shocks and springs to with koni sports or bilstien b6 of b8, cheers
Excellent stuff! Great information and installation tips together with some brill camera shots and stellar dance moves! Definitely had me cracking up on the banter, esp towards the end 🤣 Looking forward to more 🤘
You guys should invest in a 3D camera wheel alignment system, it’s costing you ££ in the labour time lost taking it some where else. Your customer base is ideal for it, it would easily pay for itself. Hunter systems are excellent but are very expensive, other brands like Hoffman, absolute alignment etc are just as good, do the same job but are cheaper.
We did have one but sold it years ago for so many reasons. The completion in the area just makes it a slow return as we have Tweeks and another with great kit very close. I get the theory but in this area the value isn’t there. Hugely appreciate the time to comment and hope you enjoyed 🤞
Very informative presentation guys thank you. I am interested as I have Mountune lowering springs but do not want to get the bilstein dampers yet as I like the ride setup as it is. However ..... I am planning to keep my FoST (16 plate) long term and an considering Powerflex bushes on the rear as I have done the front wishbone rear suspension, engine mount and roll bar bushes. I am doing this just to replace parts that are going to wear eventually and I don't think this mod will stiffen the ride up too much. So my questions are 1. How long (given average driving) would you expect the standard bushes to last (mixed driving and not ragging on the car too much (50000 miles?) . 2. Would you agree that the ride will not get stiffened up too much (10%?) when I get them done. Cheers in advance .... I would very much appreciate a reply.
Great video guys ... loved the banter between you two and Ben's one liners ... entertaining and informative. Is Alan a bit camera shy and not keen to do videos?
GREAT video and funny too! just a suggestion, maybe do a quick drive review of what you installed? You got to test drive the car anyway to make sure everything is tip top?
Unfortunately we had to be in DT for 4.30, the alignment took an hours so we didn’t have time! Certainly something we can try to sort next time. Thanks for the constructive feedback though 💙
Great video, I have just come across this as I'm doing some research. I have just changed all my arms and replaced all bushes with poly bushes, when I put car back together and test drove, its extremely bouncy, I replaced all of the bolts and rear shocks with standard oe replacements, any ideas???
Great vid and banter 😂, on the gfb dv+ what would you say is the best/safest setting, I think base setting is the centre Alan bolt for the plunger is flush with the body but can be screwed in about 4 turns I think? 🤷♂️, keep these vids coming got to see Bens tutorial corner lol👍🏼👍🏼
Tbh we’ve hardly fitted any GoFasterBits parts. The kit looks the nuts but the name let it down. As for the settings - with a lower power car; we would always suggest bias towards Recirc or they don’t sound too good. Thanks for watching and the support Ryan 💙
You guys will know better than anyone but when i go over certain rough bits of road or small pot holes i get a hell of a bang, It annoys the hell out me and i cant see what is wrong, Its not droplinks, . It is lowered on Eibachs, Standard shocks and i am running RS wheels. Defiantly think its a harsher ride with the wheels Bushes look fine, Not sure if top mounts would cause a bang. Maybe upgrading to the Billys would be a good mod. Are they stiffer?
We have Alan and the others too. Darren works on Social Media, Sales and the day to day running. It’s how a great team works; together. Awesome question though and thank you 🙏
So funny and informative video at the same time 💜 keep it coming!! Oh and btw i send you guys a message about the Block mod Kit i ordered, cheers 👍 Kennie from Denmark 😁
![KSI - Dirty [Official Visualiser]](http://i.ytimg.com/vi/VoDh1h1dPUE/mqdefault.jpg)
very funny the highlight of my day
Glad you enjoyed 🙌
@@BDPerformanceWrexham great video guys, I'm looking at changing my stock shocks and springs or my focus rs mk2, will I need adjustable camber arms or will it be OK if I only change shocks and springs to with koni sports or bilstien b6 of b8, cheers
I’ve only just subscribed to the channel, what amazes me is I didn’t realise Max Branning was a mechanic
You learn something new every day 🙌
Thanks for taking the time to comment 💙
Excellent stuff! Great information and installation tips together with some brill camera shots and stellar dance moves!
Definitely had me cracking up on the banter, esp towards the end 🤣
Looking forward to more 🤘
Thank you so much 😊
Ben is a legend! keep it going Ben well informative! Thanks for sharing!
He is indeed a legend 😊
🤗
You guys should invest in a 3D camera wheel alignment system, it’s costing you ££ in the labour time lost taking it some where else.
Your customer base is ideal for it, it would easily pay for itself.
Hunter systems are excellent but are very expensive, other brands like Hoffman, absolute alignment etc are just as good, do the same job but are cheaper.
We did have one but sold it years ago for so many reasons.
The completion in the area just makes it a slow return as we have Tweeks and another with great kit very close.
I get the theory but in this area the value isn’t there.
Hugely appreciate the time to comment and hope you enjoyed 🤞
Great video. Ben you reminded me of Ant Anstead from Wheeler Dealers with the way you came across in your small solo camera bit at the end 👌🏼
🙌🙌🙌
Very informative presentation guys thank you. I am interested as I have Mountune lowering springs but do not want to get the bilstein dampers yet as I like the ride setup as it is. However ..... I am planning to keep my FoST (16 plate) long term and an considering Powerflex bushes on the rear as I have done the front wishbone rear suspension, engine mount and roll bar bushes. I am doing this just to replace parts that are going to wear eventually and I don't think this mod will stiffen the ride up too much. So my questions are 1. How long (given average driving) would you expect the standard bushes to last (mixed driving and not ragging on the car too much (50000 miles?) . 2. Would you agree that the ride will not get stiffened up too much (10%?) when I get them done. Cheers in advance .... I would very much appreciate a reply.
Another Good vid , interested in the set up .
Jesus Dave 🤦♂️ Please stop 🛑
T-Shirts leaving today for you both 💥
Great video guys ... loved the banter between you two and Ben's one liners ... entertaining and informative.
Is Alan a bit camera shy and not keen to do videos?
We live a bit of banter; more to come for certain ✅
Thanks for taking the time to comment 💙
Can i have part number for the shocks and for the end links
GREAT video and funny too! just a suggestion, maybe do a quick drive review of what you installed? You got to test drive the car anyway to make sure everything is tip top?
Unfortunately we had to be in DT for 4.30, the alignment took an hours so we didn’t have time! Certainly something we can try to sort next time.
Thanks for the constructive feedback though 💙
Top video lads keep it up!!
Thank you Ian 💙
Great video, I have just come across this as I'm doing some research.
I have just changed all my arms and replaced all bushes with poly bushes, when I put car back together and test drove, its extremely bouncy, I replaced all of the bolts and rear shocks with standard oe replacements, any ideas???
Did you take picture of how the car sits ie lowered not lowerd etc ?
We didn’t have time on this one; it was down to the wire unfortunately with the alignment off site at 4.30pm 🤦♂️
Next time ✅
Great vid and banter 😂, on the gfb dv+ what would you say is the best/safest setting, I think base setting is the centre Alan bolt for the plunger is flush with the body but can be screwed in about 4 turns I think? 🤷♂️, keep these vids coming got to see Bens tutorial corner lol👍🏼👍🏼
Tbh we’ve hardly fitted any GoFasterBits parts. The kit looks the nuts but the name let it down.
As for the settings - with a lower power car; we would always suggest bias towards Recirc or they don’t sound too good.
Thanks for watching and the support Ryan 💙
Very nice lads
Thank
You
💙
Very informative vid well done lads
Thank you, glad you enjoyed 🙏
Brilliantly funny Darren and ben keep it up guys 😀
Thanks Stephen 😁
Great video guys👍🏾
Cheers Jason 🙌
why does autozone recommend 46mm B8 Bilsteins for my 2013 Ford Focus ST ?
No idea: personal preference we would imagine 🤷🏼♂️
If you have lowering springs the B8s are better suited for lowered cars. I have an ST as well and that's what I went with.
Oh yeahhhhhh
Did you like the video George 🤞
You guys will know better than anyone but when i go over certain rough bits of road or small pot holes i get a hell of a bang, It annoys the hell out me and i cant see what is wrong, Its not droplinks, . It is lowered on Eibachs, Standard shocks and i am running RS wheels. Defiantly think its a harsher ride with the wheels Bushes look fine, Not sure if top mounts would cause a bang. Maybe upgrading to the Billys would be a good mod. Are they stiffer?
Keep it going guys 👌🏾 another great video. Interesting didn't know you go that deep into changing the rear suspension 👍🏾
Thank you and glad you enjoyed 🙌
How come you do all the work Ben
We have Alan and the others too. Darren works on Social Media, Sales and the day to day running. It’s how a great team works; together.
Awesome question though and thank you 🙏
Good video guys. How much would all the parts and work cost?
Good vid guys !
Thank you 🙏
So funny and informative video at the same time 💜 keep it coming!! Oh and btw i send you guys a message about the Block mod Kit i ordered, cheers 👍 Kennie from Denmark 😁
Did you send the message on socials or via email sir?
Thank you for the feedback 💙
@@BDPerformanceWrexham via contact support at your website 🙂👍
@@Millo2022 🙏
top video 👍😎
Thank you 🙏
When the customer gets fed up with the squeaky powerflex bushes after 9 months, replace with superpro. They hold their lube and don't squeak.
The Powerflex bushes are knurled inside now and don’t loose their lube.
I did subscribe, you have lovely hands and painted nails 😂
Cheers 😝
The small bush for the front dog bone, what's that called please
store.bdperformance.co.uk/index.php?id_product=1179&controller=product&id_lang=1
@@benjones6205 thankyou is that correct for the mk2 rs model.
@@jordan-mcc indeed, it fits both ST and RS models👍
Whats the cost for all the kit that was installed in this video guys??
Send us an email to Ben.jones@bdperformance.co.uk and we can price it up for you ✅
Thanks for the question and hope you enjoyed the video 🤞
@@BDPerformanceWrexham just sent the email
Subject is titled
Price quote.
Cool 💥💥💥
👌👌
💥
more you ben doing stuff and less Darren talking
Your wish is our command 🙌
Great video guys 🤗
🙌