How to Replace Rear Brakes 2006-14 Dodge Charger
HTML-код
- Опубликовано: 11 окт 2024
- Buy Now!
New Brake Pad & Rotor Kit from 1AAuto.com 1aau.to/ia/1ABF...
Brake pads wear out over time, much like tires, and need replacing, on average, every 50,000 miles, with variations depending on driving habits and environment. Brake rotors may also need to be replaced if they are warped or grooved. Often, it’s safer and more cost effective to replace pads and rotors at the same time. Squealing or grinding noises, or wheel vibration are all symptoms of worn brakes. This video shows you how to install new, quality TRQ brake pads and rotors on your 2006-10 Dodge Charger.
• Check here for more videos on the 2006-10 Dodge Charger: • Dodge Charger 2006-201...
This process should be similar on the following vehicles:
2006 Dodge Charger
2007 Dodge Charger
2008 Dodge Charger
2009 Dodge Charger
2010 Dodge Charger
Tools you will need:
• Pocket Screwdriver
• Pry Bar 1aau.to/oa/1AXA...
• 14mm Socket 1aau.to/oa/1AXA...
• 17mm Socket 1aau.to/oa/1AXA...
• 21mm Socket 1aau.to/oa/1AXA...
• 1/2 Inch Air Impact Gun 1aau.to/oa/1AXA...
• Ratchet 1aau.to/oa/1AXA...
• Torque Wrench 1aau.to/oa/1AXA...
• Brake Grease
• Copper Anti-Seize
• Rust Penetrant
• sanding disc
• Drain Pan 1aau.to/oa/1AXA...
• Hammer 1aau.to/oa/1AXA...
• Sledge Hammer 1aau.to/oa/1AXA...
• Wire Brush 1aau.to/oa/1AXA...
Subscribe: / @trq
Check out our playlist:
Dodge Charger 2006-2010 6th Generation: • Dodge Charger 2006-201...
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
![KSI - Thick Of It (feat. Trippie Redd) [Official Lyric Video]](http://i.ytimg.com/vi/tXEPbotEjZE/mqdefault.jpg)
√ *Watch the Video*
√ *Buy The Part at 1A Auto* 1aau.to/m/Shop-TRQ-Parts
√ *Do it Yourself*
√ *Save Money*
Ironically my rotors just arrived and it says TRQ lol didn't know I bought it from the same channel that's showing me how to do the job 🤣🤣 what a crazy world
This video was great for a rookie. Super simple and easy to follow. Used it with great success. Thank you!
Thank you
Perfect video. I've done my front brakes but was concerned about the back. Thanks for the great video.
This channel has helped me to save money a lot
Great informative videos clear and to the point nice commentating without any extra. Quite a professional job! Thank you for your quality and informative work sir. Much appreciated thank you.
Did he call that bucket a collection receptacle
As DIY I like when you list the tools needed for the job bc in case I don’t have them
Thank you king
Why is this video so good?
U make it look so dang easy
Bore brushes come in many sizes I would imagine. What size bore brush is used for the 2006 - 2010 Dodge charger caliper bores?
Did I miss the step where you compress the piston? Also, does the e-brake hardware ever need to be replaced, or is it generally good for the life of the car?
You did miss that step, but he didn't. I learned a new technique there! Before he took the caliper off he stuck a pry bar in and leveraged the piston against the rotor. Start watching at 0:20 and you'll see it. He's quick, man!
Replace that whenever you want, or when it breaks or gives you issues.
@@TheSteveoTube That only worked because his pads were barely worn. If you have squealing pads (worn down all the way), the caliper would be fully compressed. You will certainly need the caliper tool to decompress it in order to fit new pads.
That Drilled slotted rotor was installed on the wrong side 😳
Why can't I find a video to show how to replace the parking brake shoes
Wow this looks easier than i thought.. guy just tried to charge me 432 dollars for just the back brakes alone
I've always changed my brakes on previous cars, but never on my Charger. I swapped out the brake pads on the Charger yesterday, but am now getting a FCW off light. Is there a sensor that I should be watching out for in the assembly?
Online some rotors say they’re premium g coated. Do you need to clean those prior to install too? Or will it just take the coating off
Good Job but how do you replace the parking brake shoes.
Any idea why the bolts won’t budge? Torque wrench is battery pack and it dosnt provide anywhere near the torque I need. Iv changed rotors plenty on other cars but on my charger they will not loosen. I have a few threads showing on the bolts and it still isn’t easing up. The 10th then is just as hard as the 1st. Ended up leaving the rotors and just doing the breaks out of fear of snapping the bolts. After a few spins they SHOULD become easier to take off
is it the same brake pads on the dodge charger 2006-2012 i had a 06 hemi and now 2012 v6, does them fit ??
*what a great nickname for my ex, collection receptacle*
Are the rear caliper slider boot replacements the same for the front calipers too?
Great video!
Best brake video I've watched. I just subscribed to your channel.
What Brand Bore Brush did you use? Hopefully I get a response. By the looks of others they are still waiting.
8:35 we gone act like bro ain’t almost break his back?😭
What sizes are the break pads for the rear??
"Give it a loving bonk with your hammer" That's right, I hate hammer marks!
+Paintnamer Thanks for watching our video! 1aau.to/m/Shop-TRQ
its 100 ft pounds and you use too much grease. I'll call you the grease man whom I will not go to for my work.