Code c 1260 solved

[@armeladjaho7141]

Hello friend, thank you for your video. For the code reader, I would like to know what difference there is between the status '' history " and the status '' present " that the diagnostic cases put for the codes ID

[@autotech9043]

Code C1260 indicates a problem with the steering angle sensor, which could be a faulty sensor or a short in the harness. Since wiring issues are rare, it's likely the sensor is faulty.

[@keyieradouglas3857]

Good evening, how much does this labor cost . I have the same issue and I’m going to the dealer . I just don’t want to be overcharged

[@autotech9043]

Good evening , the job it’s not hard you can do it yourself , just go step by step. The dealer will charge you around $300 up to $450 . It doesn’t take more than one hour, but you know the dealer!!!’

[@cdevkat1]

Hi was this causing the power steering to not work? I have the same code and My car has no power steering so it is very hard to turn. I have replaced the whole steering column and it still does not work. Please don't tell me it was this clock sensor the whole time!

[@autotech9043]

Could be a gear bax next to pedal not getting electric or ground look at it .

[@jsor1673]

Hello i took my kia optima 2014 sx to a workshop and they want to change whole steering column, do you think i should take my care elsewhere?

[@autotech9043]

No you should change it without taking whole thing

[@autotech9043]

It’s not hard

[@dddgoal10]

Sometimes when I'm driving and hit the brake pedal the steering power goes off, do you know what it could be causing this? When I use a scanner tool the codes are 1260 and 2412, if i delete the codes i get power steering for a while and then it fails again

[@autotech9043]

Change spring clock , the same the one in the video, good luck bro.

[@dddgoal10]

@@autotech9043 Thank you, I already bought it and should arrive tomorrow.

[@TEST-vt6no]

This is the clock spring not the steering angle sensor

[@autotech9043]

Thanks

[@alexissanchez600]

Code still appears after why??

[@autotech9043]

Did you move The locking key after you installed the part?

[@autotech9043]

You should move the lock key after you install the steering angle sensor .

[@autotech9043]

also make sure the car has good alignment

[@gabrielacosta9809]

@@autotech9043what?

[@gabrielacosta9809]

@@autotech9043how?

[@indiancitizen4659]

This is clock spring

[@autotech9043]

Yes

[@martimadi3285]

can’t see with your hands in the way

[@autotech9043]

It shows clearly

[@autotech9043]

Do you have any problems?