Do I need a special reader to clear the code. I replaced the steering coupler but the c1260 won’t go away! Dealer wants $182 just to diagnose here in the USA
Hey man quick question! I did what you did but for whatever reason my steering wheel won’t turn. I removed the steering wheel from the steering column and put the key in the ignition to see if I was able to turn the wheel and it worked . It’s just the steering column that’s locked for some reason. Any idea why this is?
@@ADDAUTOMOBILESERVICES where is the rack connection exactly ? Is there anyway I could FaceTime you so I could know where to look? If not it’s okay. I’m in the states by the way or else I’d just take it to you
how do you verify its that and not the angle sensor it self? i have a initial clack once steering wheel turns from center almost sounds like its right behind the steering wheel has the 2 same codes you have
I am facing the issue of occasional left pulling in Hyundai Elantra after calibrating the steering angle sensor as well, it is any symptom of bad flexible coupling..
thanks for taking the time to make the video.
it got me through the job.
Lol
Nice! Thank you for taking the time to film this procedure. Best Regards from the free state of Florida.
You're welcome
THANK YOU!!!!!!! YOU HAVE NO IDEA HOW HAPPY I AM BECAUSE OF YOU!
Thank God you are happy
Thank you so much! You saved my day! Your method is the easiest and the fastest to replace the flexible coupling.
You are welcome. That's good to know. I'm glad I could be of much help.
Thanks for watching. Kindly subscribe to my channel for more videos.
I have the same airbag code, steering angle sensor code, however it has a new coupler already. Any idea
You have to calibrate it
Nice job 👍🏼. Pls where do I get the flexible coupling
Gbawe Telecom
Are you changing the bushing because of noise or steering angle sensor circuit failure (C1260
Yes
Do I need a special reader to clear the code. I replaced the steering coupler but the c1260 won’t go away! Dealer wants $182 just to diagnose here in the USA
You have to calibrate it
Hi man. Please are you in Ghana? If yes, then the exact location. I have Elantra that has similar faults
Yes and in gbawe telecom
Hey man quick question! I did what you did but for whatever reason my steering wheel won’t turn. I removed the steering wheel from the steering column and put the key in the ignition to see if I was able to turn the wheel and it worked . It’s just the steering column that’s locked for some reason. Any idea why this is?
Pls check the rack connection
@@ADDAUTOMOBILESERVICES where is the rack connection exactly ? Is there anyway I could FaceTime you so I could know where to look? If not it’s okay. I’m in the states by the way or else I’d just take it to you
@@Art-sk4wb WhatsApp me +233246312303 or same number on FaceTime
@@ADDAUTOMOBILESERVICES hey I tried calling, I left a couple messages saying who I am
Ok boss
how do you verify its that and not the angle sensor it self? i have a initial clack once steering wheel turns from center almost sounds like its right behind the steering wheel has the 2 same codes you have
The steering angle sensor is in the eps(Electronic Power Steering )
@@ADDAUTOMOBILESERVICES
The code your having is only for the coupling
Yes
I am facing the issue of occasional left pulling in Hyundai Elantra after calibrating the steering angle sensor as well, it is any symptom of bad flexible coupling..
Yes and check the calibration
@@ADDAUTOMOBILESERVICES thank you so much for your helpful advice
@@ADDAUTOMOBILESERVICES i did calibration 3 times but after 20-30kms same issue comes up every time
@@ShubhamMadke pls when the problem come check your steering angle sensor value
el sensor de angulo de la direccion donde se ubica del elantra modelo 2012
It is located in the EPS module
yo tengo un elantra y me va mal la direccion, creo que es el sensor este,, que tampoco se donde esta
How do I reach you
@@ADDAUTOMOBILESERVICES my car's power Steering not working... It shows EPS and Traction Control lights on screen... What to do
@@abhikale47 pls check the fuses first and check for power on the EPS
did this problem cause a stability control light to go on?
Yes
@@ADDAUTOMOBILESERVICES Thanks! Was fearing it was the stability sensor which costs quite a bit. Will try this first :)
Ok 👍
Are you in Ghana? Where is your workshop? Give me a contact
Yes please I am in Ghana
My shop is located at caprice
Please contact me on 0246312303
Will be happy to hear from you.
At your service
Sir car in flaxx details
Hey, where did you buy the broken part?
From ali Express
It is called flexible coupling
Are You Ghanaian? If yes I have to come to see you ASAP
Yes
Ghana to the world
Yes
Nice Job! Thank you kind Sir!
Uwlc boss
Great work Sir, can you drop your contact please
Need some job done on my Elantra
@@silaspeprah42 what kind of job
+233246312303
Nice bro
Thanks bro
That's called an isolator
And u took out way more than u need to