dougle_turbo hey thanks, appreciate that. There will be part 2. Check out playlist I made of you want to get more tips on making manifolds. ruclips.net/p/PLlD0kh0mRmTkOPg0WF5ibPtKtBdS-tqy8
Hey, how do you measure the exhaust runners and design prior to cutting and welding? So that they are all exactly equal and fit inside the engine bay. I am trying to do this for my turbo RX8.
Nice Job, I have a question, what do you recommend for the central exhaust pipe diameter on a Clio 182, I find a lot of 2.5" section, but I wonder if we are not losing in torque, the original diameter is 50-51mm, thank's, I was thinking about 2.25" to have a good compromise, but I'm not sure :)
I'm knew with this stuff, I want to do my own turbo and I realize I need to make my own manifold. Where should I get the piping materials? And where should I buy a tic welder? Anything helps.
tom musson thank you very much! I tried my best not to F**k it up too much hehe. Not sure on the top power but most likely it will be limited to around 400. +second map for around 320. (Switchable maps) because of the FWD the car needs to be drivable. Don’t care about top figure.
@@RuskiWeldFab looks like it will flow the gasses well, the off the shelf kits look like a bottle neck but still respectable power produced non the less. 400 should be a riot haha.
Great video!
dougle_turbo hey thanks, appreciate that. There will be part 2. Check out playlist I made of you want to get more tips on making manifolds. ruclips.net/p/PLlD0kh0mRmTkOPg0WF5ibPtKtBdS-tqy8
holly shit, this is art, thats my dream building the best manifold ever lived and welder
ha thanks. i wouldnt go as far as ART but yeah it works ;)
Very nice
Wilddd video! Great collector. Love it
Thanks
Great video, where did you get the manifold plate from ?
custom cut
Well done dude!
yeah Boi!
Hey, how do you measure the exhaust runners and design prior to cutting and welding? So that they are all exactly equal and fit inside the engine bay. I am trying to do this for my turbo RX8.
its all pretty much guess work on mine to be honest.
@@RuskiWeldFab Serious? What if the runners are not equal length / they are too big and collide with the engine bay or other components?
@@kzz8971 on a turbo manifold its not essential for them to be equal length. and it was too big for my engine bay so that had to be modified.
Здравствуйте! Подскажите как расчитать срезы слияния труб 6-1
Hey brother what gauge tubing (thickness) is that?
its schedule 10 pipe bends. i think they are 3.2mm 304 stainless
Nice Job, I have a question, what do you recommend for the central exhaust pipe diameter on a Clio 182, I find a lot of 2.5" section, but I wonder if we are not losing in torque, the original diameter is 50-51mm, thank's, I was thinking about 2.25" to have a good compromise, but I'm not sure :)
If it’s NA, personally I think 2.25 is sufficient as you need back pressure. For turbo 2.5”
@@RuskiWeldFab thank's
I'm knew with this stuff, I want to do my own turbo and I realize I need to make my own manifold. Where should I get the piping materials? And where should I buy a tic welder? Anything helps.
R-tech for welders. metal you can buy from ebay. you want shedule 10 piping.
How does it go with the v6s doe how do u built the manifold? Is it a 3 to 1?
yeah depends on your set up. 3-1 or 3-2-1.
Which turbo do u recomend for my tiburon gt v6 im trying to get to 250-300hp on decent boost.
if u run a turbo on low psi like 5-10 does it still need an intercooler? im a noob at this
hi i need an exhaust manifold like this for clio rs mk2 turbo conversion can you do it for me ??
contact me through instagram please.
How many have these have you Made?
tom musson this is the first and only so far :) few people want one. Might make few in future. First it needs to be tested on the car
@@RuskiWeldFab yeah it looks awsome and unique. Very skilled work sir. Will be interesting to see power figures.
tom musson thank you very much! I tried my best not to F**k it up too much hehe. Not sure on the top power but most likely it will be limited to around 400. +second map for around 320. (Switchable maps) because of the FWD the car needs to be drivable. Don’t care about top figure.
@@RuskiWeldFab looks like it will flow the gasses well, the off the shelf kits look like a bottle neck but still respectable power produced non the less. 400 should be a riot haha.
@@tmusson151186 oh yes! i can not wait! new engine and box be here in few days! will be fitting it all over winter. lots more content to come :)
Зачет))
спасибо!
1:48 - bad, bad, BED job -D