New Anycubic Photon Mono 4K (2021) - Unboxing and first prints
HTML-код
- Опубликовано: 15 сен 2024
- Unboxing and first print for the new ANYCUBIC Photon Mono 4k
www.serial-tes...
Test de la nouvelle imprimante résine Anycubic Mono 4K
www.serial-tes...
AliExpress : s.click.aliexp...
![Baby Kia - GLOVES & DRACS (BLACK AF1s) [Official Music Video]](http://i.ytimg.com/vi/ajm8LeB0qQk/mqdefault.jpg)
You are supposed to remove the top part of that screen protector that is on the LCD (under vat). Then later down the road you remove the rest of that screen protector and replace it with the new one they provide.
Not too bad overall, but could you find some more annoying music next time?
Just turn the volume down
How bout 'fuckin dat mom bitch' by YOU ?
It comes with a pre-installed screen protector, so calm down. You have one already installed and one for later. Read the instructions like a normal person.
What settings did you use to achieve these results? Would be super helpful to include in the description
where did you put the black sticker sheet I have no clue what thats for so I through it away...lol might of been a bad idea but printed 200 minis so far just fine
super. Calibrate with protective shipping tape and remove before printing. leaving, we will not see Install screen protector
Just picked up a used one of these, your settings would be really helpful. Have been using Ender 3 pros and CR-10's for several years now, but this ll new to me.
My first print ( the cube ) failed - just now - I hope I can figure this out
Yo I had the same problem today, how did you fix it?
Screenprotector?
You didn't install the screen protector.
bought yesterday, the test came off at 2/3 of the print, of other 3 prints none reached the bottom, they always come off, it is not my first printer, I hope today to be able to print, I also hope that the problem is not the 2s of exposure, otherwise it promises the fake with 1.5s, the screen protector had already been mounted would have been useful, I have two small air bubbles left, and now I have to wait for another one to arrive, before trying to replace it, I hope not to regret not having taken another elegoo
Thats not good. Do you still have the issue? Do you regret your decision? Would like to hear your experience. I am a beginner and want sth under 300, that is easy to use. So maybe the anacubic or the elegoo mars 2pro. But with the 4k, anacublic should be in front on the quality side?! What other printers do you have?
@@vornamenachname608 hi dear, I don't have the problem now, something was wrong with the supports, maybe it is better to use the magnetic strip too, for the quality the mars 3 is of the same level, except that in Europe anycubic was in offered a month ago when I got it, and it cost 60.00 less than the mars 3, I also have an elegoo mars pro, and a flashforge 8.9, if you write from the us, you recommend the flashforge for a simple reason, I saw that there it's at $ 338, it's 4k, large 8.9 "printing plate, it already has monochrome, if you like to print after a while you have taken a small one you want a bigger one, so with a single purchase you are already happy, otherwise the mars 3 always there with you, now it's at $ 254, I would take that one at that price too. quality among the best.
@@sfchannel1334 Hi. First of all thank you for the detailed answer. :) When the 4k is on the mars 3 level, than that is fantastic. Jes that's true. Currently the 4k is a lot cheaper on Aliexpress for me. In my country it is around 260, while the mars3 is at 349,75 (amazon 359,99) Euro currently. The flashforge 8.9 around 500 Euro. Where do you buy your stuff, that it is so cheap? Maybe i am ordering on the wrong side with Aliexpress. :D So for your prices i surely would invest a bit more to take the flashforge. Thanks a lot, mate.
@@vornamenachname608 FLASHFORGE 8.9 AT $ 338 AND MARS 3 AT $ 254 WAS AND SHOULD STILL BE, ON OFFICIAL EBAY US PROFILES, BUT IF YOU BUY FROM EUROPE LIKE ME THERE ARE ALMOST $ 260 IMPORT AND ANOTHER $ 70 SHIPPING THAT NO LONGER SENSES , IF AS ALREADY SAID YOU BUY FROM AMERICA THEN IS THE BEST WAY
@@vornamenachname608 NO FRIEND, I TOLD YOU THE BEST PRICES I HAVE SEEN AND WHERE I HAVE SEEN THEM, BUT I BUY THEM IN EUROPE BECAUSE OF THE OTHER EXTRA EXPENSES THAT I WOULD HAVE BUYING FROM AMERICA, SO IF AS IN MY CASE YOU SAVE WITH ANYCUBIC COMPARED TO MARS 3, TAKE ANYCUBIC QUIETLY THERE IS NO REPENT.
Good video, but that film you removed was the LCD screen protector. Do you need it? No, but at least that’s what my manual said it was
It’s only to protect the screen during shipping. You remove it and beneath it is the actual screen protector with black tape. (He should have Z=0 after he removed). The printer comes with a replacement screen protector and tape as well.
Warning to all those who are thinking about buying --- please send a message in to Anycubic and warn them NOT to send the cheaper brushed aluminum build plate. If you want the checker boarded laser etched build plate (the one that is displayed on the site) -- you better make a fuss for it in advance. I was just sent the wrong build plate and I'm working it out with service now.
why is the checker board better?
@@ikkiiiieee The brushed aluminum plate is very rough and not very flat. I strongly suspect that you'll have a very difficult time scraping a print off that surface. I don't have direct experience with this yet. This is only my suspicion at this point. I have both plates here now. The second reason that I feel this way is that the Chinese instinctively take value away from customers who are uninformed -- so when I got the plate not promised, I assume it is because I lost value in this change.
@@keithsummers1889 I sent them an email. They're playing dumb, they replied: 'are you asking about Light Matrix'... will see how they respond to my reply
@@ikkiiiieee :') they asked you what you wanted to know and you get lippy lol, good luck on this goosechase as the matrix flatbed makes literally 0 0 i repeat 0 difference. took me 5 days to sand it flat and iv had better results
Just got this printer and I'm doing prints indoor with a air purifier running, will this be enough for the fumes? also using the ANYCUBIC Water Washable low odor resin
Just use it near a window with a fan in the window blowing out to keep the fumes out.
How much VAT to put
Install screen protector please. =)
I know the instructions say to remove it, but why not leave the factory one on there?
There is the protective film and one already on under that one
@@SleeperJ Yeah I eventually realized that.
@@RedShiftedDollar Thanks, i thought that dont have screen protector
@@raphaellohr Same. The instructions are not clear. The screen protector is already installed underneath the film but you can’t tell by looking at it. The one it comes with is a spare.
👽👍
i hate videos like this. your doing and doing but never really say what it is your are doing.
this Chinese machine sucks!
More then joe?