Thank you for your clips , very very useful . Do you find the MAO - micro arc oxidation - better scratch resistant in long terms compared to regular type II anodizing of CONVOY S2+ ?
hello sir. i think leavel 2 about to 200 lm. Level 3 about 500 lm. Just muly guess. Level 2 can last the whole night. Level 3 may be about 3-4 hours. Thanks for watching and your support sir 😊. Please subscribe 🙏.
Hey and thank you for your video. Im interested in this flashlight but i cant decide between this S2+ and S21a. Do u know something about the output of the S21a with 519a? Is it the same 1300 lumens like the S2+? Im searching and searching but i dont find anything about it. I would appreciate your help a lot. Thank u :)
S21a has a more powerful driver sir. It's 3v 6a. S2+ is 3v 5a. S21a 519a may probably reach almost 1300lm sir. You can check the led performance here. Thanks for watching sir 😊. Please subscribe 🙏. www.reddit.com/r/flashlight/comments/scntbw/nichia_519a_light_output_compared_with_other/
What are some flashlight emitters you recommend for bright white light. Something in the 4500k-5700k. I really like the sst20, t40, the sft40, but I’m looking for something floody. Thank you In advance for your time and recommendations.
Hello sir. You should try big led like xhp50.2 or xhp70.2 . They are very floody. Or if your flashlight can use tir lens, this can make a floody beam. Thanks for watching sir 😊. Please subscribe 🙏.
I love the beam profile of the 519A on the Convoy S21A, very balanced ratio of center spot and side spill. The SST20 on the S2+ is almost hard to use as EDC, very throwy.
@@weerapatkiatdumrong thanks for the answer. I was really worried about diode degradation due to the high current. already subscribed) like your videos very much)
I got S2+ with 519a 2700k. I want to change the 2700k to 3500k. Do i have to remove the entire plate and use an iron like your video then solder the plate back in?
Actually when I bought a new led, I bought it together with the board sir because it is easier when you want to change the led. However, I also use my hot iron if the base of my new led can't fit in the flashlight. Thanks for watching and your support sir 😊🙏.
@@weerapatkiatdumrong Do you know the size of the board ? Also does it just fit in without soldering? I've never done this before. I never even have taken the led out or looked at that inside ever. I'm just learning.
Yes sir. A reflector also affects throw. However, sst20 itself is a thrower. For the S15, you asked a good question sir. I don't find it on AliExpress. I find it on Shopee, Lazada. Some Thai sellers also sell it. Thanks for watching sir 😊🙏.
From my experience the SST emitters have a lot of green tint shift. I do not have SST 20, many SST 40 though. I prefer the Nichia emitters mostly. However, if some throw is needed the Nichia emitters might not do well for that task in an S2. I have an S2 with Osram CSLNM1 for my throwing needs, and the Osram does not appear to have the horrid green tint shift the SST emitters seem to display. Thanks for the video, very informative.
Agree with you sir. For sst40 5000k, I have a lot of them and some are different even they says 5000k. Some are quite yellow but some are not.Very strange. Thanks for watching and sharing sir 😊🙏.
@John Hooper Yes, the SST 40 is a bright LED, however, the CRI and tint are not very desire able compared to the Nichia or Samsung emitters. I have an S2+ with a 5700K Samsung LH351D, and I really like that emitter, got a good amount of white light and some neutral. The 5000K LH351D has some slight green, however, a much better improvement over the SST 40. It would be a good gesture if Sofirn, Astrolux, Wurkkos, and some other manufacturers would offer Nichia and Samsung emitters for more options with their offerings. I have an SC31PRO with 5000K and I am very disappointed with the 5000K SST 40, that particular emitter has the most horrid and awful green tint of any that I have ever purchased. Now, I might have to find a way to do an emitter swap to either a Samsung or Nichia just to be pleased with the light the tint is so terrible. The light otherwise is brilliant, just the awful tint is hard to bear. Nichia, and Samsung are the best options for most uses, and now with the 519A available, and LH351D, they will handle most needs. If more brightness is needed it seems that the triple and quad setups seem to be working well with some offerings.
Even in 2700K the SST20 has high positive duv. It has a strong yellow shift, only the old XM-L2 has a worse shift. But I also have a 5000K SST20 that is only visibly green at very low power, it has good white light in normal use modes.
@@weerapatkiatdumrong Did you get that S2+ MAO at Flashlight Brand and if so did it come with the battery? When I looked at the listing it doesn't say battery not included but in the contents it just says flashlight and box.
@@weerapatkiatdumrong Thanks! He needs to fix the listings so they're more clear. Half the flashlights that don't have battery says not included some say nothing. If it says nothing you assume it has the battery.
Hello sir. My Google translate sometimes doesn't work with your language. I don't know why. But I try to guess your sentence. 519A is quite floody white sst20 is quite throwy. Thanks for watching sir 😊🙏.
![NOSFERATU - Official Trailer [HD] - Only In Theaters December 25](http://i.ytimg.com/vi/nulvWqYUM8k/mqdefault.jpg)
519a 5000k is pretty cool, I can't wait to receive my FireFlies E12C with it but dedomed.
WOW. Thanks for watching and sharing sir 😊🙏.
Thank you for your clips , very very useful . Do you find the MAO - micro arc oxidation - better scratch resistant in long terms compared to regular type II anodizing of CONVOY S2+ ?
No sir. Mao seems to get scratches and dirtyness easier than regular colour. Thank you very much for your support sir 😊🙏. Happy new year!
they have different reflector shape?
Hello sir. No sir. Same sized reflector sir. Thanks for watching and your support sir 😊. Please subscribe 🙏.
Well that really showed the difference in the LEDs.
If s15 uses op reflector, I still think that it can throw better than 519a. Sst20 gives really good throw indeed. Thanks for watching sir 😊🙏.
please do not go in the forest. stay home and use a white wall. please! thank you!
Hello sir. Thank you very much for your suggestions. Please subscribe 😊🙏.
Nice review man. I’m thinking about getting one of these, but I don’t know whether to get the linear or buck driver? What do you think? Thank you!
Hello sir. Buck driver sir. Thank you very much for your support sir 😊. Please subscribe 🙏.
If both is 519a, which 1 will be more flood light, s15 or s2+ ? Thanks
Hello sir. The same sir. They both use the same reflector size. Thanks for watching and your support sir. Please subscribe 😊🙏.
How many lumens and how long does level 2 and 3 of the s2+ last?
hello sir. i think leavel 2 about to 200 lm. Level 3 about 500 lm. Just muly guess. Level 2 can last the whole night. Level 3 may be about 3-4 hours. Thanks for watching and your support sir 😊. Please subscribe 🙏.
Hey and thank you for your video. Im interested in this flashlight but i cant decide between this S2+ and S21a. Do u know something about the output of the S21a with 519a? Is it the same 1300 lumens like the S2+? Im searching and searching but i dont find anything about it. I would appreciate your help a lot. Thank u :)
S21a has a more powerful driver sir. It's 3v 6a. S2+ is 3v 5a. S21a 519a may probably reach almost 1300lm sir. You can check the led performance here. Thanks for watching sir 😊. Please subscribe 🙏.
www.reddit.com/r/flashlight/comments/scntbw/nichia_519a_light_output_compared_with_other/
@@weerapatkiatdumrong Thanks for your quick response. In your video u write in the specs the S2+ reaches 1300lm. Im confused a bit now.
Tint on this SST20 is terrible!
4000k for me is fine sir. Thanks for watching sir 😊🙏.
@@weerapatkiatdumrong 5000k is good i mean the green tint of the SST20
What are some flashlight emitters you recommend for bright white light. Something in the 4500k-5700k. I really like the sst20, t40, the sft40, but I’m looking for something floody. Thank you In advance for your time and recommendations.
Hello sir. You should try big led like xhp50.2 or xhp70.2 . They are very floody. Or if your flashlight can use tir lens, this can make a floody beam. Thanks for watching sir 😊. Please subscribe 🙏.
@@weerapatkiatdumrong thank you for the help!
I love the beam profile of the 519A on the Convoy S21A, very balanced ratio of center spot and side spill. The SST20 on the S2+ is almost hard to use as EDC, very throwy.
Yes. I can't agree more sir. Thanks for watching sir 😊. Please subscribe 🙏.
@@weerapatkiatdumrong
Already am subscribed, sir 😎
Hello. I have a question. Is it ok to use 5a driver with this LED? Because max allowed current for it is 2.2amps. according to the datasheet.
For 519a, you can even use 6a sir. I have m21b 519a with 3v 6a driver from Convoy factory. Thanks for watching sir 😊. Please subscribe 🙏.
@@weerapatkiatdumrong thanks for the answer. I was really worried about diode degradation due to the high current. already subscribed) like your videos very much)
@@TheBestGames4PC Don't worry sir. It's not an expensive led. Just use it. Thanks for your support sir 😊🙏.
I got S2+ with 519a 2700k. I want to change the 2700k to 3500k. Do i have to remove the entire plate and use an iron like your video then solder the plate back in?
Actually when I bought a new led, I bought it together with the board sir because it is easier when you want to change the led. However, I also use my hot iron if the base of my new led can't fit in the flashlight. Thanks for watching and your support sir 😊🙏.
@@weerapatkiatdumrong Do you know the size of the board ? Also does it just fit in without soldering? I've never done this before. I never even have taken the led out or looked at that inside ever. I'm just learning.
@@avgrim7729 The led board of the s2+ is 16mm sir. If you want to put the board out, you need to remove the solder from the red and black wire sir.
@@weerapatkiatdumrong Thank you!
@@weerapatkiatdumrong With wick or flux?
Does the reflectors have anything to do with more throw? Or just the led? Why are the S15 unavailable on Ali and FB?
Yes sir. A reflector also affects throw. However, sst20 itself is a thrower.
For the S15, you asked a good question sir. I don't find it on AliExpress. I find it on Shopee, Lazada. Some Thai sellers also sell it. Thanks for watching sir 😊🙏.
@@weerapatkiatdumrong Hi, Ali has the S15 now. Which has farther throw? SFT40 in the S15 or the S2+?
@@avgrim7729 The same sir. Both use the same reflector. Thanks for watching sir 😊. Please subscribe 🙏.
@@weerapatkiatdumrong Thanks for the info!! I've been subscribed for probably 2 years or more.
@@avgrim7729 Thanks for your support sir 😊🙏.
S15 หลอด SST20 เป็นไงบ้างครับ น่าใช้มั้ยส่วนตัวเล็งอยู่ เอาไว้พกเล่นๆ
ผมเคยรีวิวไว้อยู่ครับ แสง 5000k แสงสวยเลยครับ แต่ผมว่า เอา sst40 ไปเลยครับ ไหนๆ แล้วก็เอาแรงเผื่อไปเลยครับ ขอบคุณที่รับชมครับ ฝากติดตามช่องหน่อยนะครับ 😊🙏
From my experience the SST emitters have a lot of green tint shift. I do not have SST 20, many SST 40 though. I prefer the Nichia emitters mostly. However, if some throw is needed the Nichia emitters might not do well for that task in an S2. I have an S2 with Osram CSLNM1 for my throwing needs, and the Osram does not appear to have the horrid green tint shift the SST emitters seem to display. Thanks for the video, very informative.
Between the Osram CSLNM1 and SST 20, in your experience, which do you prefer in an S2+? Thanks.
Agree with you sir. For sst40 5000k, I have a lot of them and some are different even they says 5000k. Some are quite yellow but some are not.Very strange. Thanks for watching and sharing sir 😊🙏.
@John Hooper Yes, the SST 40 is a bright LED, however, the CRI and tint are not very desire able compared to the Nichia or Samsung emitters. I have an S2+ with a 5700K Samsung LH351D, and I really like that emitter, got a good amount of white light and some neutral. The 5000K LH351D has some slight green, however, a much better improvement over the SST 40. It would be a good gesture if Sofirn, Astrolux, Wurkkos, and some other manufacturers would offer Nichia and Samsung emitters for more options with their offerings. I have an SC31PRO with 5000K and I am very disappointed with the 5000K SST 40, that particular emitter has the most horrid and awful green tint of any that I have ever purchased. Now, I might have to find a way to do an emitter swap to either a Samsung or Nichia just to be pleased with the light the tint is so terrible. The light otherwise is brilliant, just the awful tint is hard to bear. Nichia, and Samsung are the best options for most uses, and now with the 519A available, and LH351D, they will handle most needs. If more brightness is needed it seems that the triple and quad setups seem to be working well with some offerings.
@John Hooper Agree sir. Thanks for your support sir 😊🙏.
Even in 2700K the SST20 has high positive duv. It has a strong yellow shift, only the old XM-L2 has a worse shift. But I also have a 5000K SST20 that is only visibly green at very low power, it has good white light in normal use modes.
SST20 is high CRI?
I think no sir. Sst20 high cri is 3500k and 4000k sir. Thanks for watching sir 😊🙏.
@@weerapatkiatdumrong Did you get that S2+ MAO at Flashlight Brand and if so did it come with the battery? When I looked at the listing it doesn't say battery not included but in the contents it just says flashlight and box.
@@avgrim7729 I got it from FlashlightBrand sir. No battery sir.
@@weerapatkiatdumrong Thanks! He needs to fix the listings so they're more clear. Half the flashlights that don't have battery says not included some say nothing. If it says nothing you assume it has the battery.
@@avgrim7729 Ok sir. I will talk with the shop. Thanks for your support sir 😊🙏.
519 cильно греется?он горячее сст20?
Hello sir. My Google translate sometimes doesn't work with your language. I don't know why. But I try to guess your sentence.
519A is quite floody white sst20 is quite throwy. Thanks for watching sir 😊🙏.