Does your stove have two indicators light? One is the element on indicator light and the other hot surface indicator light. I noticed that the element switch and the element temperature sensor have a "P" connectors.
@@DeaninItYourself That's very strange. Could you possible provide me the range model number so I can check the electrical schematic to see how the indicators lights are connected. Thanks
Thx for the details video to repair for fixes. I had GE profile Range with thermal contact stuck closed but my heating element worked and after turned off, the led light will stayed lighted. Disconnecting the power did not reset but control switch kept it energized for the double burner. I removed the connections on terminal “P and S” for for few minutes and the thermal bimetallic contact was open mean switch was good. Connected the wires and indicating led light turned off. Tested after finished and the light indicator turn on when burner was turned on and gone off when turned off. You may want to update the video with this repair condition.
Mine says “cook top on, cook top hot” when turn off the burner. I did the test as the video indicated, switches didn’t beep, all burners beeped. 😢 looks like I’ll need replace all of them.
@@DeaninItYourself I had dismantled it all & ended up reassembling it. If I rotate that dial fully clockwise; light goes out. If I just go to “right 1/2” & off”, it stays on. Haven’t noticed low heat on the connected burner, which I never use it; just leaving it. My meter seemed to read that it’s normal; but hard to tell. I rarely cook & one big burner is all need. (I’ll worry about it if it goes red hot & maybe just buy new).
Help! Just realized that I am not seeing things! When not in use, my GE PROFILE glass top stove shows a surface burner warm light slightly glowing…(like a faded flicker)-but LIT! *Turning ON by itself when dial was never touched. (Thought it was just a glare from an angle previously & not lit). Spice rack was back there & an empty pot; burner is WARM! Not even using that burner- like ever. Fire hazard! I could only get the light off on stovetop (the warm indicator)-by turning dial all the way around to OFF. In a few minutes; it’s lit again & burner is warm! Have maybe used that burner 2/3x (top left single-burner, 2-3x since bought new 2007)- it’s the 2nd dial from left, over door. This is too much! Scary.
That was the best explanation I’ve come across. It left me feeling confident to try my hand at trying this repair. Thank you!!
You are welcome, I’m glad I could help.
Saved me $$$$$ thanks sir!!!!!
Thank you for your help that saved me a lot of money.
you are welcome
Thank you for great instructions.
Got it fixed with your help!
Glad it helped!
Does your stove have two indicators light? One is the element on indicator light and the other hot surface indicator light. I noticed that the element switch and the element temperature sensor have a "P" connectors.
no it just has a hot surface light
@@DeaninItYourself That's very strange. Could you possible provide me the range model number so I can check the electrical schematic to see how the indicators lights are connected. Thanks
Thank you sir very helpful video 👍
Most welcome
Great job thank you
you are most welcome
So the testing is all done unplugged?
I would like to know as well
Excellent video. Troubleshot my stove asap, and it's only gonna cost me 25 bucks to fix. Thanks!
I’m glad it was helpful!
Nicely done sir. I have to get my multimeter from my office tomorrow but plan to get this done. Thank you.
Have fun
Thx for the details video to repair for fixes. I had GE profile Range with thermal contact stuck closed but my heating element worked and after turned off, the led light will stayed lighted. Disconnecting the power did not reset but control switch kept it energized for the double burner. I removed the connections on terminal “P and S” for for few minutes and the thermal bimetallic contact was open mean switch was good. Connected the wires and indicating led light turned off. Tested after finished and the light indicator turn on when burner was turned on and gone off when turned off. You may want to update the video with this repair condition.
Refridgedaire oven light will not turn off. How do I fix it? Thanks!
check the switch
That was a great video, saved me a ton of cash. Thank you so much for the great information.
anytime
Mine says “cook top on, cook top hot” when turn off the burner. I did the test as the video indicated, switches didn’t beep, all burners beeped. 😢 looks like I’ll need replace all of them.
Easy fix with help from this video. It was easy to see which switch was the issue.
So, safe to say, if it’s turning on by itself- it’s the switch or switches?
yes its probably the switch
@@DeaninItYourself I had dismantled it all & ended up reassembling it. If I rotate that dial fully clockwise; light goes out. If I just go to “right 1/2” & off”, it stays on. Haven’t noticed low heat on the connected burner, which I never use it; just leaving it. My meter seemed to read that it’s normal; but hard to tell. I rarely cook & one big burner is all need. (I’ll worry about it if it goes red hot & maybe just buy new).
Awesome
Thanks
This happened on r lg after power outage
Help! Just realized that I am not seeing things! When not in use, my GE PROFILE glass top stove shows a surface burner warm light slightly glowing…(like a faded flicker)-but LIT! *Turning ON by itself when dial was never touched. (Thought it was just a glare from an angle previously & not lit). Spice rack was back there & an empty pot; burner is WARM!
Not even using that burner- like ever. Fire hazard! I could only get the light off on stovetop (the warm indicator)-by turning dial all the way around to OFF. In a few minutes; it’s lit again & burner is warm! Have maybe used that burner 2/3x (top left single-burner, 2-3x since bought new 2007)- it’s the 2nd dial from left, over door. This is too much! Scary.
hello! you are cruzes uncle!
Yes I am!
nope not mine