В чем заключается процесс реставрации? В том, что ты "помыл" на вид убитую вилку, которая оказалась в отличном состоянии? Или в том, что дерьмово ее покрасил? Даже не удосужился поролоновые кольца промыть. Сраный кликбейтер.
Great restoration! It would have been amazing If you gave some colour to the fork lock, It looks like the blue is quite gone. You did a fine job with that fork, looks sick!
I was going to say that - replace them more times than the o-rings inside as a professional. Nice job on them though, could have done with a Matte/satin finish though
You don’t want that. Washing soap contains salt that you do not want anywhere near the inside of your fork and 100% you don’t want that in the damper it will corrode everything once it mixes with the oil.
Great. Not sure about reusing dust boots, but can't always get em I guess. Very much enjoy the lack of commentary. Life is short, waffling on doesn't always add value. Good visuals too.
In future, use brake cleaner and clean the foam rings better. Spray cleaner and squish the foam ring and you'll get everything out of them and make them like brand new.
@@ModHiveNet Я не менял пыльники примерно лет 10 , просто меняю масло и то очень редко , вилке хоть бы хны , как новая , что визуально , что внутри , что по работе, а так в Польше есть ремкомплекты
@@ModHiveNet я знаю , у меня принцип , пока не попало ничего , можно не менять , слежу и все , а перебирать каждые 50 часов это как по мне только для спортсменов , они же в своё время мне кажется каждую гонку выкидывают и покупают новую вилку
@@makingfreedom2348 не знаю к чему ты про веломехаников , у тебя свой принцип , у меня свой , в сервисы не обращался и не буду , сам все делаю, я высказал своё мнение , что 50 часов это мало , смысла не вижу так часто перебирать не участвуя в гонках
hey man. I recently purchased a used 29er with a Rockshox Reba fork. Now, I noticed that my front wheel is buckling to the left when braking, but more worryingly, I noticed the fork will vibrate/shudder if I just clip on the brakes, so not actually braking, just moving the bike forward and suddenly just clip the brake will induce a visible vibration/shudder. would you reckon the fork is done for or something that can be repaired? cheers brother.
Legal. Mas o retentor entrou sem nem bater kkk. E nao molhou as espumas em oleo nem lubricou os retentores com graxa. Mas ta bom, melhor q usar a suspa cheio de terra dentro kkk
Ok tutto bello e interessante ma se io dovessi fare una manutenzione completa alla mia forcella che e' una giant crest,che componenti debbo comperare? rockscok oppure trovo i suoi originali giant? grazie se mi date una risposta
Write to sram in the support explain you case and describe you model fork and the number part or kit need you to restored the fork, weedings from colombia bro :)
о боже ты поставил старые паралонки и сальник , иы умный ваще дядь , это расходник так то . А учитывая их состояние , они подлежат замене . Я уж не говорю что ты сальники диформировал при снятии , а это уже замена....
As long as they wiper seals aren’t cracked or perished they’re ok to use again. Seals wear in with use and get better, although foam rings should always be changed.
Thank you for watching. :)
We need more asmr video like this
Nice work 👍
В чем заключается процесс реставрации? В том, что ты "помыл" на вид убитую вилку, которая оказалась в отличном состоянии? Или в том, что дерьмово ее покрасил? Даже не удосужился поролоновые кольца промыть. Сраный кликбейтер.
чертовски хорошо отклеиваешь наклейки. спасибо за твое терпение!
Nice to see a well made fork rebuild vid for a change!!! Got a Reba with cracking seals, and this will come in handy!!!
생활의 달인같다....어떻게 하는지 방법 다 알려주는데도 따라할 엄두가 안난다...
Hola. Tu propuesta de contenido es genial y única. Aprendo mecánica, me relajo, es instructivo, etc. Gracias!
Great restoration! It would have been amazing If you gave some colour to the fork lock, It looks like the blue is quite gone.
You did a fine job with that fork, looks sick!
실력 진짜 좋으십니다.
진짜 대단하시다ㄷㄷ
omg................old foam rings and seals? but paitent lowers.... gfus
All that effort but putting old seals and foam rings back :D
Amigo, como é antiga , deve ser difícil achar peças. Estou com dificuldade de achar o kit pra trocar do meu canote retrátil também antigo.
I don’t replace wiper seals unless they are damaged or have jagged edges etc as they wear in. Foam rings should be replaced every time though.
I was going to say that - replace them more times than the o-rings inside as a professional. Nice job on them though, could have done with a Matte/satin finish though
Hahah
they should repaint first the housing before they clean the inside
Hayalim 992 Carrera S. Buğra reis jantlar 10 numara.
Still pretty good looking fork..
Esse cara é bom no que faz!
You should clean the foam rings using dish washing soap before re installing it.
You don’t want that. Washing soap contains salt that you do not want anywhere near the inside of your fork and 100% you don’t want that in the damper it will corrode everything once it mixes with the oil.
Respect to Your works. Racing parts need a lot of maintenance and care.
Great. Not sure about reusing dust boots, but can't always get em I guess. Very much enjoy the lack of commentary. Life is short, waffling on doesn't always add value. Good visuals too.
Dobra Robota pozdrawiam serdecznie Poland
Bro, no words. Most excellent!!!
Profissional de alta nível e outra coisa, perfeito e cuidadoso, parabéns
Alto nível? O cara desmancha a suspa e reaproveita retentores e esponjas velhos? Só perdeu tempo
bem isso mesmo.o cara realmente bom,faz tudo sem deixar nada para tras@@alexandrelara5801
Excelente video
Top demais o vídeo!
con tan buena herramienta y tanto trabajo y no le pone retenes y esponjas nuevas????
Lista para publicarla a la enta como "servicio reciente"
In future, use brake cleaner and clean the foam rings better. Spray cleaner and squish the foam ring and you'll get everything out of them and make them like brand new.
Better still, new foams and seals 🤷♂️
Or you could just get new ones
Or better yet, who cares💪🥴👍
@@brickcity9mm896 🥱🥱🥱
@@bigalsbash the foams usually don't need to be replaced for all the ones i've done for people
Un placer verlo
장인♡
Very satisfying👍
Excelent content. Very good job..but why don't to put new foams and dust seals??!!
what a nice ASMR
nice job, but can you please make a tutorial on this fork how to change the fork bushings?? should be great
Muy buen video
Nice Video
Great job
Amazing work 👍 🤝
Thanks😌
greetings, how much oil should you put in the fork?
Очень классная вилка , у меня такая же, вилке 15 лет , а новые сейчас ничем не лучше , я бы сказал по работе даже хуже
@@ModHiveNet Я не менял пыльники примерно лет 10 , просто меняю масло и то очень редко , вилке хоть бы хны , как новая , что визуально , что внутри , что по работе, а так в Польше есть ремкомплекты
@@ModHiveNet я знаю , у меня принцип , пока не попало ничего , можно не менять , слежу и все , а перебирать каждые 50 часов это как по мне только для спортсменов , они же в своё время мне кажется каждую гонку выкидывают и покупают новую вилку
@@ModHiveNet да , качество сто пудово лучше было , во всем , не только в вилках
@@arsen6639 с таким принципом веломеханики никогда не вымрут) 50 велочасов - это плюс минус 1000 км)
@@makingfreedom2348 не знаю к чему ты про веломехаников , у тебя свой принцип , у меня свой , в сервисы не обращался и не буду , сам все делаю, я высказал своё мнение , что 50 часов это мало , смысла не вижу так часто перебирать не участвуя в гонках
Good morning, could you tell me if there is a difference between the maintenance of the Reba SL and the Reba RLT? Thanks.
Nice vid
precisamente la parte mas importante para cambiar, no la has cambiado, retenes de botellas y esponjas... adiós a las barras
Dlaczego nie wyczyszczone gabki olejowe, a najlepiej wymienione i uszczelki kurzowe. Caly serwis na darmo.
It's amazing video
Thanks!
🇮🇩👍🥶Beautifull Gaes,.SHOCK SERVICE
hey man. I recently purchased a used 29er with a Rockshox Reba fork. Now, I noticed that my front wheel is buckling to the left when braking, but more worryingly, I noticed the fork will vibrate/shudder if I just clip on the brakes, so not actually braking, just moving the bike forward and suddenly just clip the brake will induce a visible vibration/shudder. would you reckon the fork is done for or something that can be repaired? cheers brother.
Cuánto aire arriba vs aire abajo??
Coloca a mesma calibragem em cima e em baixo ?
So much better to restore than replace 👍
Essa é dual ar ?
Legal. Mas o retentor entrou sem nem bater kkk. E nao molhou as espumas em oleo nem lubricou os retentores com graxa. Mas ta bom, melhor q usar a suspa cheio de terra dentro kkk
The best
Satisfying
Quem me dera conseguir igualar, tenho a minha e já não tranca.
Nice 👍
Ok tutto bello e interessante ma se io dovessi fare una manutenzione completa alla mia forcella che e' una giant crest,che componenti debbo comperare? rockscok oppure trovo i suoi originali giant? grazie se mi date una risposta
👏👏👏
4:06 Can you give link for this screwdrivers? (It's look so comfortable to remove o-rings)
Hey man, can you help me to choose Aerosol Spray Paint for painting my bike in black gloss color ?
👌👌👏👏👏👏
서스폔션에서 오일이 묶어있는데?
ㄷㅏ그런가요
잘못된건가요
👏👏👏👏👏
Cycle Tyre washing making video please
nice
what material are made those orings?
Hola. Tanto trabajo...y dejo las mismas almohadillas y retenes viejos para que le destruyan los Barrales 🤦
expert
se chamam a isto revisão e coloca novamente as mesma esponjas e retentor usados por amor de deus
I have a pair of Reba Race shocks from 2008 that I would also like to rebuild. How do you know which o-rings to use? Are they general sizes?
Write to sram in the support explain you case and describe you model fork and the number part or kit need you to restored the fork, weedings from colombia bro :)
@@gerardorodriguez2000 I'll try that, thank you :)
Dar hora
В этой жизни приятно смотреть на 3 вещи, как горит огонь, льется вода, и как работает ВЕЛОМИХАНИК
It was very good, but it didn't clean the foam. It's the right thing. That's all that was missing.
desmontar é fácil pra mim
Please Manitou Markhor Comp
If I find that shock, I'll record it on video.
It takes 5 seconds to turn the old foam rings inside out, so they contact the stanchions with the clean side…. 😂🤣😂
Is there a way I can buy any of these suspension forks?
Go to your local bike store
😃😃😃😃👍👍👍👍👍👍👍👍👍👍👍
WTF... you iinstalled old dust wipers 😅 but new stickers.
🇷🇴👍
I did a service on RockShox Recon Silver TK SoloAir with 100mm travel, PopLoc andno the lockout is not working, anyone know what could cause this ??
Incorrect oil level in rebound damper
@@pimdrenth4039 Hi and thanks, how would I be able to find the correct oil level??
о боже ты поставил старые паралонки и сальник , иы умный ваще дядь , это расходник так то . А учитывая их состояние , они подлежат замене . Я уж не говорю что ты сальники диформировал при снятии , а это уже замена....
Тоже расстроился когда он грязные старые паралонки запихал и сальники которые уже сыпались(
@@user-vc7ff9ne8j он ещё и бушинги старые оставил
Он мог хотя бы отмыть поролоновые кольца :(
и так сойдёт 😂
Сальнікі можно било би в поменять
Ter que dar pancadas para soltar qualquer peça, não é legal...
Oi
😅👏🤝👍🥇🏆🙏
හොදයි
Foam oring 🤦♂️🙄
А что так можно было...?
bro those poor lowers....😢😢😢
up
Ты заменил все оринги, но не заменил сальники в штанах? Бл.ять это просто без смысла.
И как часто нужно такое ТО вилкам делать?
Каждий день
I didn't know you had to depress a valve to let the air out I'm gonna try it myself for my tires next time I replace my winter tires for summer tires.
You should better read manuals. It's not a good job with old seals, foam and dust rings. Also if it a restoration, paint should be matte
As long as they wiper seals aren’t cracked or perished they’re ok to use again. Seals wear in with use and get better, although foam rings should always be changed.
Поролонки мити не треба?
No cambia los retenes por unos nuevos😳😳😭😭🤣🤣🙈🙈👎👎
Great tutorial. The sad thing is at the end of the day it's still a Reba.
not professional service.
Lol it's RUclips my man.
Что???!!Ты ставишь старые пыльники и мочалки обратно???мочалки как минимум помыл бы!дизлайк.
arrêtez un peu avec votre ESMR ! c'est nul, sinon bah réparation pas vraiment total, et faux autocollants, dommage....
Peut etre ecrit ta critique en anglais.
Lol
дичь..аж прям зауважал ригидные вилки