DIY - 2010 Skoda Yeti Front Brake Pad Replacement. Replace your own PADS at home. SUPER easy.
HTML-код
- Опубликовано: 30 сен 2024
- Today I replace the rfront brake pads on a 2010 Skoda Yeti. The old pads are worn and in need of desperate replacement.
You do not want to miss an episode? Hit that SUBSCRIBE, LIKE and POST NOTIFICATION button to ensure you stay up to date with all the latest news.
------------------------------------------------------------
Questions? Comments? Business inquiries? Collaboration ideas - Email me at '4wheelbuilds@gmail.com'
------------------------------------------------------------
Facebook: / 4wheelbuilds
Instagram: / 4wheelbuilds
Twitter: bu...
------------------------------------------------------------
#skoda #yeti #diy
Good clear instructions. And excellent close ups when necessary. Thanks.
Thank you for your time to provide the feedback 😊 really appreciate feedback from everyone, positive or negative, helps me improve my content and love interacting with everyone. Have an awesome weekend 😎
To make these jobs a bit easier I turn the steering wheel so the calipers are more accessible .
great suggestion!!! thank you
The outer pad actually should be fitted into the piston and if you have waterpump pliers you don't need a compression tool to retract the piston into the caliper. Finally, if the brake fluid reservoir had been topped up to reflect the pad wear, you may need to syphon some fluid out when retracting both calipers to prevent it overflowing..
Thank you for your valuable comment
Really helpful mate
Glad it helped
All very good with one extra possibility … the disc is removable with one star shaped screw and this would make the rust removal with the wire brush a little easier
Great suggestion Tony 👌
Very good helpful video thanks mate. ❤
Glad the vid was helpful 😀
Ok, you do make it seem super easy haha. Would it be the same procedure to replace the breakpads on an f82? 🤔
Brake pads are not hard of a job, anyone can do it at home with some basic tools. So give it a try. Never done an F82, but majority of front brakes work the same. Calipers and pad mounting could be different but all else should be the same.
@@4WheelBuilds ill try it once time comes to replace them. Curious how it will work out for me
It's just a few screws ... :)
@@4WheelBuilds let's hope so haha
Thanks for video just did mine on Xmas Eve morning.
Merry Xmas 😀
good tutorial
Glad you found it helpful 😀
Hello,
There is a mistake, you have inversed the pads, the exterior one should be into the brake caliper.
Please correct it in the description, brakes are security elements so be aware.
Good luck.
Thanks for the info, but the pads were installed correctly. They have the pad wear indicator on the inside pad and this pad must be installed there as the cable would not be long enough to connect.
@@4WheelBuilds Or maybe you did use the one of the brake caliper pad other side in external of the current side in video because there is only one that have the connector. I'm sure 100% it will be that.
@@simoratoko3778 I'll check it out and ensure it is correct. Thank you for the info always appreciate it.
Watching as i have to do my 2015 model soon - very good and informative video. Thanks!
glad it's of help and informative, that's the best feedback I can receive. Hope the job will go smoothly for you