Ford Focus (2001 - 2005) - Thermostat removal and refitting

Поделиться
HTML-код
  • Опубликовано: 26 авг 2020
  • Do you need to replace the Thermostat removal and refitting on your 2001 to 2005 Ford Focus but don't know where to start? This video tutorial shows you step-by-step how to do it!
    Our Ford Focus manual covers 01 to 05 reg plates, both petrol, and diesel engines, and includes videos for some of the most common jobs, which you can see here in this playlist. Get the full manual here: haynes.com/en-gb/ford/focus/2...
    What's covered:
    Petrol:
    Ford Focus Hatchback 1.4L (1388cc) (2001 - 2005)
    Ford Focus Saloon 1.4L (1388cc) (2001 - 2005)
    Ford Focus Estate 1.4L (1388cc) (2001 - 2005)
    Ford Focus Hatchback 1.6L (1596cc) (2001 - 2005)
    Ford Focus Saloon 1.6L (1596cc) (2001 - 2005)
    Ford Focus Estate 1.6L (1596cc) (2001 - 2005)
    Ford Focus Hatchback 1.8L (1796cc) (2001 - 2005)
    Ford Focus Saloon 1.8L (1796cc) (2001 - 2005)
    Ford Focus Estate 1.8L (1796cc) (2001 - 2005)
    Ford Focus Hatchback 2.0L (1989cc) (2001 - 2005)
    Ford Focus Saloon 2.0L (1989cc) (2001 - 2005)
    Ford Focus Estate 2.0L (1989cc) (2001 - 2005)
    Turbo-Diesel:
    Ford Focus Hatchback 1.8L TDCi (1753cc) (2001 - 2005)
    Ford Focus Saloon 1.8L TDCi (1753cc) (2001 - 2005)
    Ford Focus Estate 1.8L TDCi (1753cc) (2001 - 2005)
    Ford Focus Hatchback 1.8L TDDi (1753cc
    Ford Focus Saloon 1.8L TDDi (1753cc) (2001 - 2005)
    Ford Focus Estate 1.8L TDDi (1753cc) (2001 - 2005)
    Including special/limited editions
    Exclusions:
    Does NOT cover 1.8 litre dual-fuel engines. Does NOT cover RS, ST170 or C-Max, or 'new' Focus range introduced January 2005.
  • Авто/МотоАвто/Мото

Комментарии • 28

  • @nikolamecic1482
    @nikolamecic1482 Год назад +2

    Thank you for your explanation
    Helped me a lot . God bless good people! 👍

  • @sandupop5608
    @sandupop5608 2 года назад +1

    Un adevărat mecanic . Foarte grijuliu .

  • @Madcracka
    @Madcracka 5 месяцев назад

    Excellent video

  • @walkeralinpetrunorocea4138
    @walkeralinpetrunorocea4138 3 года назад +1

    Thank you so much, respect !

  • @niccoooodu61
    @niccoooodu61 11 месяцев назад

    Thanks a lot !

  • @HassanHassan-pv3vp
    @HassanHassan-pv3vp Год назад

    Thank you for clarifying what is the measurement of the degree of opening the valve

  • @gjavo6400
    @gjavo6400 7 месяцев назад

    Thanks, very helpful, even with the manual at hand. Is this job doable without removing the alternator? I prefer to leave things in place when I can, especially on older cars where bolts may have gotten crusty.
    How to ensure the right aftermarket thermostat housing, other than buying straight from Ford (which comes incomplete I read above?). On part supplier websites I get many different types.

  • @davidspeed8151
    @davidspeed8151 3 года назад +4

    At 6.25 How did they start the engine before re-connecting the battery ?

    • @HaynesManuals
      @HaynesManuals  3 года назад +1

      Thanks for your comment, and apologies for the editing error.

    • @bonesivegot1
      @bonesivegot1 3 года назад +1

      I thought the same thing, lol. At least Haynes reply with an acknowledgement.

  • @StuMunro
    @StuMunro 2 года назад

    does the replacement thermostart come with both gasket seals?

    • @HaynesManuals
      @HaynesManuals  2 года назад

      I think so, but best to check with a parts supplier

    • @StuMunro
      @StuMunro 2 года назад

      @@HaynesManuals Purchased the thermostat from Ford. Sadly it does not come with the heater port seal. Pretty daft you don't get all the parts to complete the replacement as would be crazy not to replace both seals after the effort of draining it down.

    • @HaynesManuals
      @HaynesManuals  2 года назад

      I agree. Thanks for letting us know

  • @shannonandmattsopenmic3257
    @shannonandmattsopenmic3257 3 года назад +2

    I replaced my thermostat with an aftermarket one in an attempt to solve overheating that started after a garage replaced my thermostat as part of a service. Because this thermostat goes on the lower radiator hose it occured to me that the jiggle pin air valve might be backwards, leaving the system unable to clear an air lock. Coolant normally flows from the spring to the face of a thermostat but in this engine it is the reverse. I removed the pin, leaving a small hole. The overheating was solved.

  • @dashamirmuca4502
    @dashamirmuca4502 3 года назад

    Ford 1.8 tdci 2000

  • @adriancooper8820
    @adriancooper8820 3 года назад

    this is all very good if you own a 1.6 but i own a 1.8 2002 ford focus, can you do a video on that engine please as ive got to replace the thermostat housing and thermostat

    • @HaynesManuals
      @HaynesManuals  3 года назад

      Sorry, we've no immediate plans to produce that video. Probably best to buy the Haynes manual instead!

    • @adriancooper8820
      @adriancooper8820 3 года назад +1

      @@HaynesManuals ive got the haynes manual just a video is a lot easier to follow

    • @HaynesManuals
      @HaynesManuals  3 года назад

      Ah..good, thanks for buying the manual. We'll start producing videos again once the virus situation is sorted out.

    • @MegaReddevil71
      @MegaReddevil71 3 года назад

      Easier on 1.8 near coil pack

    • @Mr_guernsey_explorer180
      @Mr_guernsey_explorer180 10 месяцев назад

      I got 1.8 taking off drive belt everything like that wouldn't of thought all that just to get thermo off

  • @tim91279
    @tim91279 Год назад

    so you start the car the reconnect the battery ?🤦🏻‍♂️