@@yeunhahoquach I have very little mechanical inclination. I ordered the parts from eBay and Rock Auto. It was a very easy fix. You may want to have a 2nd set of hands to help if you decide to do it yourself.
I have a 2016 Tucson. Both front windows quit working. The front passenger was intermittent for a while then stopped then finally the driver window stopped working after a while. I tested power and grounds and all was good. I removed the door panels and removed the motors. I twisted backwards on the gear making sure not to damage and the window went down about 1/4 inch. I reinstalled the motors and it worked fine. This fixed both windows no parts required. What is happening is the windows overtime get out of sync with the up and down limits and it will bind the motor when the window is up. The motor does not have enough strength the break this binding and get started. After backing off the tension and reinstalling the motor (3 bolts, very easy) they both work great. I wonder how many regulators have been replaced because of this limit switch issue. What made me try this is I could hear the motor trying to engage when I activated the switch down. So I knew the motor was working. By the way, a mechanic told me these motors are tough and hardly ever go out.
Great explanation thanks for this video it helped alot. That black and white tabs hiding at the back corner was where I was stuck at. Thanks for showing and explaining that part. 🤘🏻💪🏻😁
Thank you for posting this video. I have to do this twice this weekend. So now you know you're going to get at least two more views on top of the two I've already made through the whole thing LOL I appreciate the honesty too. Most videos I watch about stuff like this just show you when it's done and don't actually tell you that you're probably going to bust your knuckles on that bottom tab LOL. Thank you!
I got stuck briefly at 13:35. The white section of the door latch visible in the video slides into the black section of the regulator. Pull towards the front of the car on the black part while simultaneously pushing the white part towards the rear. It should not take a lot of force The rest is straightforward and mainly dealing with push pins and connectors. This was a lot easier than a Dodge Ram truck I recently did
That 3 inch big white tab by the door latch that she had problems with detaching can be a bear to slide back on the new part. I had to use a wire hook i made to pull the white tab while aligning the black grooves on the new part. also, notice she attaches the window while motor is still off. If you put the motor on and then attach the window it can catch on some models, like mine. Other than she explains everything you have to do clearly. I did mine today. Bring a lunch.
Great video. I wads wondering how to motor knows the stop positions with the new panel? Since the regulator could broke down any any position, unknown at the beginning of the replacement. It is pity that you need to remove so much material if only the cog or wire could be wared out.
Thank you! I had to replace my driver window regulator this morning and your video was a huge help! I have a 2016 Tucson limited sport turbo and I have had so many issues with it lately. 3 months ago I paid the dealership $1000 to fix the regulator for my front passenger window amongst a bunch of other things, and this time I did it myself for just the cost of the part at $90. I took what I could from this video and two others (links below) and had a very easy time replacing this part. On my Tucson, the one major difference was that the driver side had an extra wire attached once you unlocked it from the white plastic piece. When the panel was completely removed, I had to disengage the electrical from the inside panel, the area near the hinges of the door and feed that end through. There's a portion of this video that helped with that part. (12:00) ruclips.net/video/Ysv-kkmXrkc/видео.html This one was also pretty helpful, but I didn't end up having to completely remove the glass. ruclips.net/video/HSVyJ_FA4fc/видео.html
Why did you replace the whole panel. All you needed to replace was the white plastic regulator drum gear that the motor shaft goes into. Advanced auto sells them for $24.95.
Hello! Could you show me how I could remove the map light on my 2016 Hyundai Tucson? I need to fix my left map light since it got pushed back behind the metal brackets.
I have 20016 Tucson with this Fxxxxxxxxg trouble, it will cost me $2000 for all Fxxxing 4 windows!!!!!!. I hate this Fxxxxxxxxg Hyundai, Don't buy it no More! How much for regulator panel? Where did you buy it?, Thanks for show vdo!
Thank you! The dealer wanted over $700 to fix this. It cost me $130 for the regulator and new motor. It only took about an hour thanks to your video.
I just called huyndai dealer wants $890 to replace it 😮
@@yeunhahoquach I have very little mechanical inclination. I ordered the parts from eBay and Rock Auto. It was a very easy fix. You may want to have a 2nd set of hands to help if you decide to do it yourself.
This lady is a legend! I just completed this repair. Thank you!
I have a 2016 Tucson. Both front windows quit working. The front passenger was intermittent for a while then stopped then finally the driver window stopped working after a while. I tested power and grounds and all was good. I removed the door panels and removed the motors. I twisted backwards on the gear making sure not to damage and the window went down about 1/4 inch. I reinstalled the motors and it worked fine. This fixed both windows no parts required. What is happening is the windows overtime get out of sync with the up and down limits and it will bind the motor when the window is up. The motor does not have enough strength the break this binding and get started. After backing off the tension and reinstalling the motor (3 bolts, very easy) they both work great. I wonder how many regulators have been replaced because of this limit switch issue. What made me try this is I could hear the motor trying to engage when I activated the switch down. So I knew the motor was working. By the way, a mechanic told me these motors are tough and hardly ever go out.
This video saved me 300 bucks.. thanks !!
Thank you. Going to try this as the dealership “fixed” it twice now. Tired of wasting hours there.
Wow, 4 years old and the regulators strip. Awesome job Kia/Hyundai 👏
Great vid! appreciate you explaining the details as you go along. 👍
❤❤ you're amazing that was a much bigger job than I expected it to be
Thanks for the video. I have to replace mine this weekend. I’ve already replaced the front passenger two months ago.
Great explanation thanks for this video it helped alot.
That black and white tabs hiding at the back corner was where I was stuck at. Thanks for showing and explaining that part. 🤘🏻💪🏻😁
Great job, your video help us put both front door panels in. Best video I saw.Thank you.
Thank you so much!! Great quick video. Got the window back up and running. Had the same problem as you!!!
Thanks ! Had to fix every window in mine. Nice job
Thank you for posting this video. I have to do this twice this weekend. So now you know you're going to get at least two more views on top of the two I've already made through the whole thing LOL I appreciate the honesty too. Most videos I watch about stuff like this just show you when it's done and don't actually tell you that you're probably going to bust your knuckles on that bottom tab LOL. Thank you!
I got stuck briefly at 13:35. The white section of the door latch visible in the video slides into the black section of the regulator. Pull towards the front of the car on the black part while simultaneously pushing the white part towards the rear. It should not take a lot of force
The rest is straightforward and mainly dealing with push pins and connectors. This was a lot easier than a Dodge Ram truck I recently did
Great job with your experience and taste, thank you
Nice video. Thanks for the tutorial!
That 3 inch big white tab by the door latch that she had problems with detaching can be a bear to slide back on the new part. I had to use a wire hook i made to pull the white tab while aligning the black grooves on the new part. also, notice she attaches the window while motor is still off. If you put the motor on and then attach the window it can catch on some models, like mine. Other than she explains everything you have to do clearly. I did mine today. Bring a lunch.
I used this video for info on how to replace my 2017 Tucson's door stay
Great video. I wads wondering how to motor knows the stop positions with the new panel? Since the regulator could broke down any any position, unknown at the beginning of the replacement. It is pity that you need to remove so much material if only the cog or wire could be wared out.
Thank you! I had to replace my driver window regulator this morning and your video was a huge help! I have a 2016 Tucson limited sport turbo and I have had so many issues with it lately. 3 months ago I paid the dealership $1000 to fix the regulator for my front passenger window amongst a bunch of other things, and this time I did it myself for just the cost of the part at $90.
I took what I could from this video and two others (links below) and had a very easy time replacing this part.
On my Tucson, the one major difference was that the driver side had an extra wire attached once you unlocked it from the white plastic piece. When the panel was completely removed, I had to disengage the electrical from the inside panel, the area near the hinges of the door and feed that end through. There's a portion of this video that helped with that part. (12:00) ruclips.net/video/Ysv-kkmXrkc/видео.html
This one was also pretty helpful, but I didn't end up having to completely remove the glass. ruclips.net/video/HSVyJ_FA4fc/видео.html
Very helpful & detailed
Thank you!
So I have to replace mine. Bit of can't find the actual panel online. They want to sell it without the motor
Were you able to find this panel? I’m having the same issue right now but can’t seem to find the panel so I can replace it
@@tishagoad6658 Yes, I found it on ebay.
Great video! Thanks.
Greetings for you from Iraq
Why did you replace the whole panel. All you needed to replace was the white plastic regulator drum gear that the motor shaft goes into. Advanced auto sells them for $24.95.
Hello! Could you show me how I could remove the map light on my 2016 Hyundai Tucson? I need to fix my left map light since it got pushed back behind the metal brackets.
Good job👍
Thank you girl
Hello. Do you have the part number of this Window regulator?
Is this if your window stops working up/down
I own 4 Hyundai autos, 2014- 2019. This 2016 Tucson, with its bobo door locks and window regulators, is the reason I will NEVER buy another one!
This Tucson was my first, got 3000 reduced trade in offer because I have this issue on both front windows. Never buying Hyundai again.
Thank you
Hi. Did you buy the panel online? Tnx
Huyndai should recalls for this junk
You should replace both at the same time otherwise your taking a gamble that one will cause the other to fail.
Hello
Mine is stuck but the motor seems to be doing noise, like it’s trying to pull it up, anyways, it won’t go up…
The plastic regulator wheel is stripped. That's what happened to mine, and is a common issue. Especially in the south where it's humid.
Huyndai has ok motor the rest are junks.
😂😂😂
I have 20016 Tucson with this Fxxxxxxxxg trouble, it will cost me $2000 for all Fxxxing 4 windows!!!!!!. I hate this Fxxxxxxxxg Hyundai, Don't buy it no More!
How much for regulator panel? Where did you buy it?, Thanks for show vdo!
😴😴😴😴😴😴😴😴😴😴😴😴😴
Get what you paid for lol