Great job. Very daunting first time. I do the Fiat 500s out and in in about 2 hours now. I was a bit worried that when you took the handbrake off the car was going to end up rolling off and embedding in your house! Congratulations on reaching the 1k subscribers too.
Thanks very much for watching 👀. I know it did move a little lol 😆 . You should be a expert on fiat's now & know where every screw goes. Hopefully i will get like that one day. Whoop whoop I know its exciting 1000 subs ... I bet you was the same when you achieved it... looking forward to 2000k now lol. Keep on pushing yourself to achieve more 💪...look forward to seeing more of your videos buddy.
Have you first changed the dash, plugged everything in and then replaced the front crashsensors? Im in here to do the same, would not like to blow my new airbags. Help is much appreciated. Great job!
Fantastic job on the dashboard looking forward to watching you do the gearbox and if you still have a airbag light on it might be because the seat belt has gone ones you change the seat belt it might go off 😉
If there are any stickers on the old dash behind where the instrument cluster went then I'd suggest transferring them over to the new one before you put the cluster in. Some vehicles carry coded data relating to the electrical equipment and specification on tags like that so it could prove useful for anyone working on issues in the future to have the correct sticker there... Taking the interior, especially the dashboard, apart on any modern vehicle is a real pain in the behind. They use so many screws, bolts and fixings to hold everything together and try and stop squeaks, creaks and rattles, and a lot of them are hidden or covered by other pieces of trims so finding them all can be an absolute mission. Well done for getting this done, I'm really not sure I'd have the patience and temperament to do what you completed. There would be much bad language and rattles getting thrown out of the pram...
Thanks for the advice there wasn't any stickers but definitely keep that tip for next time. The dashboard wasn't that bad & every screw went back with none left over lol. I had to bite my 👅 a few times lol thanks for watching 👀
Great video mate.. just confused on where the short springy cards that control the vents and heating go into? I've plugged it into the back of the unit but where does the other end go?
Well I'm honoured Paul. Thanks very much for your support 👍 Its very hard starting off on RUclips with so many good channels out there but finally made a 1000k subs... so onwards & upwards... i hope you subscribed lol ....
top job lad dont ever let any one say you can't ,like that gear box get it welded ,prove me right .cant wait for next vid. ps , never give up.
Thanks very much for your support really appreciate it 👍. I've already bought a gearbox so going to give it a go.
Great Job. Your definitely up for a challenge. Well Done. You deserve more. All the best.
Thank you so much 😀
Nice one chap. Good video. Looks so much better now. Look forward to the next one. Take it easy mate
Thanks very much for your support really appreciate it 👍. New video coming very soon 😀
@@RevivingSalvage brilliant.
Audi looking well with that new dash look forward to seeing the next video 👌👍
Thanks very much for your kind comment i will be tackling the gearbox tomorrow... should be uploading soon
Good man awesome work 👏 keep it up....A1 will be done in no time.
Thanks very much for your support really appreciate it. Theres a long way to go yet but starting to take a little shape.. thanks for watching 👀
Hi mate good work with a dash i'm looking forward to the gear box replacement just take your time don't rush this one keep up the good work 💪💪
Thanks fella the dash wasn't that bad. But I'm shitting myself with the gearbox... got to give it a go.
Great job ! Well done you !
Thanks very much for your support really appreciate it 👍. New video coming very soon 😊
Great job mate. Tidy!! Enjoyed watching 👍
Thanks very much for your support really appreciate it 👍.
Very good video! Keep up the good work!!
Thanks very much for your support really appreciate it 👍.
Great job. Very daunting first time. I do the Fiat 500s out and in in about 2 hours now. I was a bit worried that when you took the handbrake off the car was going to end up rolling off and embedding in your house! Congratulations on reaching the 1k subscribers too.
Thanks very much for watching 👀.
I know it did move a little lol 😆 .
You should be a expert on fiat's now & know where every screw goes. Hopefully i will get like that one day.
Whoop whoop I know its exciting 1000 subs ... I bet you was the same when you achieved it... looking forward to 2000k now lol. Keep on pushing yourself to achieve more 💪...look forward to seeing more of your videos buddy.
Reviving Salvage looking forward to the next one.
Congratulations well done 👌
Thanks very much for your support 👍
Great job........did you have any screws left over by any chance.....!
Surprisingly not... I normally have a screw hanging around but no all went back perfectly. Thanks for watching 👀
Have you first changed the dash, plugged everything in and then replaced the front crashsensors? Im in here to do the same, would not like to blow my new airbags. Help is much appreciated. Great job!
Fantastic job on the dashboard looking forward to watching you do the gearbox and if you still have a airbag light on it might be because the seat belt has gone ones you change the seat belt it might go off 😉
Thanks very much 👍... you might be right im sure we will find out when I change the seat belt ... thanks for watching 👀
If there are any stickers on the old dash behind where the instrument cluster went then I'd suggest transferring them over to the new one before you put the cluster in. Some vehicles carry coded data relating to the electrical equipment and specification on tags like that so it could prove useful for anyone working on issues in the future to have the correct sticker there...
Taking the interior, especially the dashboard, apart on any modern vehicle is a real pain in the behind. They use so many screws, bolts and fixings to hold everything together and try and stop squeaks, creaks and rattles, and a lot of them are hidden or covered by other pieces of trims so finding them all can be an absolute mission. Well done for getting this done, I'm really not sure I'd have the patience and temperament to do what you completed. There would be much bad language and rattles getting thrown out of the pram...
Thanks for the advice there wasn't any stickers but definitely keep that tip for next time.
The dashboard wasn't that bad & every screw went back with none left over lol. I had to bite my 👅 a few times lol thanks for watching 👀
Great video mate.. just confused on where the short springy cards that control the vents and heating go into? I've plugged it into the back of the unit but where does the other end go?
Do you mean the thin cable that controls the fan speed & the heat control? I'm trying to figure out what part you mean?
Good job 👍
Thanks very much for your support really appreciate it 👍. New video coming very soon 😀
Good video, hope the steering wheel is straight 🔥
When I was changing the steering wheel I put the steering lock on so the wheels didn't move... thanks for watching 👀
Nice job
Well I'm honoured Paul. Thanks very much for your support 👍
Its very hard starting off on RUclips with so many good channels out there but finally made a 1000k subs... so onwards & upwards... i hope you subscribed lol ....
What about airbag module crash data erasing
Don't worry I haven't finished the seat belt yet but will be looking to clear all the air bag codes .. thanks for watching 👀
Hi mate, any idea where the airbag module is located ??
Underneath the center consol by gear stick buddy