That was some pretty slick editing. So many of these do it yourself instructional videos drag on because the people that make them feel the need to film everything. It's great to see someone who manages to pack all of the necessary info (and a bit of personal charm) into a nice tight package.
Very well put together video. ??: why didn’t you install the electrical connection while you were at it? If needed, that would be a perfect time to add air bags.
Perfect instructional video! I would have applied some touch-up paint around the edges of the holes you holesawed - to prevent rust starting. I enjoy your videos, always comprehensive and detailed, top marks!
This was one of the best how-to videos I have ever seen on RUclips. I want to get that setup on my 17 F-250 but I'm not that good to do it by myself. I'm glad that now I know at least how to do it.
Awesome video, you convinced me to do this myself on my new 2019 F250 Limited. I bought the new special socket for the bed bolts but my tool kit doesn't have a torx bit big enough for the M16X45 Torx bolts. It isn't a T45 as I have that and it's way too small. Any idea what size torx bit I need for the bracket?
If anyone has come here to find how to do this on their truck; and they have a spray in bed liner, here's a time saving tip. Get yourself a decent chisel or, a good wide blade flat screwdriver and a tape measure. Look at the install instructions and you'll see the rough dimensions of where the holes "should be" , and you can go ahead and scrape off the bedliner over those areas in a small 2" circle. You'll be able to easily find the factory dimples in the Aluminum bed. Now you can drill and you'll have a clean install. Also, another tip. I was able to do mine without removing the bed, but unhooking everything, and using a jack and some 4x4 sections to lift the bed. I wedged some 4x4 chunks between the frame so give me space to slide in the mounting frame. Wasn't fun, but saved me the cost of having it installed. Been working great for 35k miles pulling a 38' Sportsman 5th wheel.
Great explanation on how to do this! Do you know when Ford started putting the guide dimples on the beds? I want to do this job to my 2011 F250, but it has rhino liner so I can't tell. If mine doesn't have the dimples, any idea how difficult getting the measurements just right would be? Thank you!
It’s great to see manufacturers integrating towing hitches into the trucks, and as it appears the kit contained many details such as fasteners with loc tight already applied. I seriously considering an F 250 purchase myself I’ve been impressed by many of Fords features over the other big three and I like the 6.2 gas engine as well.
I purchased my truck with the hitch kit. I love it to tow, but when you have a load of gravel/compost etc. you will hit your shovel on those stupid puck every time. They should be placed at the bed level and not the rib level.
Glad you got a new rig! Nice Ride! We just keep our old ones chugging along. Looks like there may be a good thing for working for a dealer all these years after all! AND the Farmall came to the rescue one more time! Maple leaves on the ground here too. 35 to 40 tonight. You probably have snow already! I got a pal with a machine shop to put a Reese hitch on my old Ford. Wish I still had it. 330-6, 4-speed, short bed, limited slip 4x4. Beat to death but ran fine. Now I got an 89 Taco with a 4.3 4x4 but it's paid for. What else can I say.
Freezer fillers. One of my last jobs last fall the boss cooked up a mess of fresh tenderloin biscuits for breakfast. I had 3 and wanted 3 more but I'd been snoring on the dozer. I only hunt with a knife and fork and never miss! Take care, Pal!
So, have you put a CAT in the F-350 yet? LOL Always enjoying watching your videos. I've been keeping up with your tractor videos, and now I'm viewing your older stuff.
Squatch253 if you don't mind me asking, where did you buy this 5th Wheel/Gooseneck Hitch Package. Where it has both the 5th Wheel, and the Gooseneck in the same "package". Please and thank you!
Does this kit come with a wiring kit for the inside of the bed? When I called the dealership today he said it looks like it does but didn’t give a 100% answer. Was wondering if you knew about this? Thank you in advance
Nice! think if was me when had bed off…. I would have sprayed a under coating of some kind on everything if lived in area like you do! So as to help preserve body and parts of the truck! As well as put drain holes in the holding areas that hold moisture and debris even if just use liquid weather stripping chalking to fill in pockets gaps and voids!
do you have the part number for the kit.. I have a 2015 Super Duty. someone drilled holes but it was not a Ford Puck system not sure what system they installed so may need to re-drill holes (I hope not) if you could also give me the spacing between the holes and distance from the front bed wall to the fist hole that would help.... If not no problem i understand....
@@squatch253 thank you. I think the previous owner must have had a trailer on the ball for 80,000 miles. Im coming to the conclusion the the black plastic has fused with the metal ball.
So some clown that owned my truck before me cut the ball and neck off of the hitch and I’m not sure how to get it out and don’t want to pull the bed off. Any ideas?
you don't happen to have that part number do you? I'm supposed to have my 2018 F250 delivered tomorrow and the dealer is telling me that the trim/plugs aren't included in the kit...???
Thanks for the quick reply! My truck did show up with the trim rings and plugs still in the bag in the back seat of the truck! thank you for checking into that for me! keep up the videos!
Wow I had no idea that the prep kit was available aftermarket I've been looking for used super duty with the prep kit and I passed on the perfect one 3 weeks ago because it didn't have the prep kit fml
I have the frame crossmember in my 2015 truck but not the holes or trim rings and covers. Does Ford or someplace else sell the trim rings and puck covers? I don't want to drill holes until I get all the rings and covers,Thanks!
I am installing one on my new to me 2016 f350 dually. Quick question, do you know if the new nuts for the bed bolts are supposed to be smooth as in no threads, all 8 of my new bolts are without threads? Are the new bolts self tapping? Maybe that's why ford wants them replaced? Thanks
I need help!!! My buddy gave me the side brackets and crossmember, but I don’t have any of the bolts. Ford dealership says they can not sell just the bolts, as i will have to buy the entire package. What do you think I should do?!?
Squatch, I'm sure it's been asked before...whats that part number to the kit? Same size bed here. 2014 6.7 but shouldnt make a difference. Good find on that truck though!
Thanks so much for that link. They indicate that they can ship within 1-3 business days and I've sent them a request for availability. I also was able to locate the in bed wiring harness at www.oemfordpart.com/oem-parts/ford-trailer-wiring-harness-in-bed-hc3z15a416a. Thanks again for the information and for the informative video.
Hey Squatch, just wondering about rust on the sawn hole edges in the tray. Would it be worth sealing them with paint for protection or will the rubber seals keep them clean and dry?
Do you have a part number? I have a 2013 F250 srw I need to do the same thing but I am having all kinds of trouble finding this puck system. And what was the price?
Another great how to install DIY video! Which is better a puck type prep kit, or rails? I like the puck setup better than rails, just by the looks. Actually I guess I am referring to the below bed rails vs the above bed rails.
I'm thinking of getting a 2018 F350 soon. What are the chances of having you do this for me? I'm not very handy, nor do I have the equipment to do it. Where are you located?
Can you do a video of the fifth wheel / gooseneck trailer wiring plug install inside the bed of the truck instead of just running your trailer wiring down to the bumper plug?
Great job! I am buying a 2012 Lariat with this already installed. I use a Cab Over camper and may need to use a bigger rubber mat. Now I know what this feature looks like in the bed. Thanks.
hey man, great video showing the install. I am looking to put the frame in my 2015. I managed to find a used frame for a good price, but it doesn't come with the hardware and was wondering if you by chance knew what size bolts came in this kit to put it all together and mount it to the frame?
I'm thinking that this is the correct way to do things. Especially by using O.E.M. parts and accessories, they're guaranteed to fit, and I presume are also covered by Ford's warranty too, in this case? I was trying to see what size of engine is in that truck; I imagine it's an optional ( larger ) then stock by looks of the exhaust pipe? I like the looks of 'plain' model trucks, it lend's itself to be easily 'customized' at will.
Yeah, I kinda thought it was a tad larger gas. engine than stock. that 6.2 can haul for sure. Those were my thoughts too on the diesel option, especially if you're not doing an awful lot of towing and driving, like you mentioned.
@@squatch253 I couldn't agree more on all the new Diesel trucks from any brand, they're great when the factory is on the hook to fix them but loosing the high pressure pump on a Ford 6.7 will just about bankrupt a guy! The cost to purchase, maintain and repair a modern diesel in a light duty truck makes the diesel a loosing proposition for me. Keep up the good work!
Squatch, great video! You seem to be a great mechanic, and you describe and explain things wonderfully. I just bought the 2018 350 Superduty. It did not come from factory with the puck system, so I went to Ford Parts.com and ordered the kit. Here’s my question. The 4 ¼” and 3” holes that are drilled in be bed of the truck seem a bit large. These holes seem to give about ½” gap or a bit more. I understand that the finishing rings will cover the holes, but only by about 3/8”. Does there really need to be that much clearance, or would a 3 ½” and 2 ½” holes be sufficient? These holes would still provide ¼” clearance all the way around the whole. Just seems that removing the least amount of material is best, and not taking any chances that the cutout will sneak beyond the finishing ring. Any and all positive, helpful comments welcome, and thank you again for your videos. BTW, the instructions in my kit do also call for the 4 1/4" and the 3" holes.
Hey Squatch, thanks for the input. Interestingly enough, I had just finished my project when I saw that you posted. I did end up going with the recommended hole size, and I'm glad I did. The extra wiggle room when lowering the bed, even with the factory guide pins, was good to have. And ther really isn't excessive clearance and the rings cover nicely. It's very interesting that you said you do them at the dealership. Our dealership in Rapid City wouldn't touch it, said it was a liability issue. Anyway, thanks again, and by the way, the Moline is looking great!
Squatch123 Just wondering how you marked the holes in the bed before cutting...meaning so the holes would match the metal mount , holes lined up , looked centered etc? This video answered alot of my questions so i can install mine lol Thank for any help.
That was some pretty slick editing. So many of these do it yourself instructional videos drag on because the people that make them feel the need to film everything. It's great to see someone who manages to pack all of the necessary info (and a bit of personal charm) into a nice tight package.
Very well put together video.
??: why didn’t you install the electrical connection while you were at it?
If needed, that would be a perfect time to add air bags.
Perfect instructional video! I would have applied some touch-up paint around the edges of the holes you holesawed - to prevent rust starting. I enjoy your videos, always comprehensive and detailed, top marks!
Do you have the part number by chance?
What’s the part # for the one u installed for 2016?
This was one of the best how-to videos I have ever seen on RUclips. I want to get that setup on my 17 F-250 but I'm not that good to do it by myself. I'm glad that now I know at least how to do it.
What was the part number of the prep kit? Also how long did it take to get it installed?
Awesome video, you convinced me to do this myself on my new 2019 F250 Limited. I bought the new special socket for the bed bolts but my tool kit doesn't have a torx bit big enough for the M16X45 Torx bolts. It isn't a T45 as I have that and it's way too small. Any idea what size torx bit I need for the bracket?
Thanks @@squatch253 . Now if I can just find a place that sells individual torx sockets! Cheers.
Fuking awesome and DETAIL video man !!!!
If anyone has come here to find how to do this on their truck; and they have a spray in bed liner, here's a time saving tip. Get yourself a decent chisel or, a good wide blade flat screwdriver and a tape measure. Look at the install instructions and you'll see the rough dimensions of where the holes "should be" , and you can go ahead and scrape off the bedliner over those areas in a small 2" circle. You'll be able to easily find the factory dimples in the Aluminum bed. Now you can drill and you'll have a clean install.
Also, another tip. I was able to do mine without removing the bed, but unhooking everything, and using a jack and some 4x4 sections to lift the bed. I wedged some 4x4 chunks between the frame so give me space to slide in the mounting frame. Wasn't fun, but saved me the cost of having it installed. Been working great for 35k miles pulling a 38' Sportsman 5th wheel.
Great explanation on how to do this! Do you know when Ford started putting the guide dimples on the beds? I want to do this job to my 2011 F250, but it has rhino liner so I can't tell. If mine doesn't have the dimples, any idea how difficult getting the measurements just right would be? Thank you!
That thing is beefy and I’d imagine it would add some rigidity to the rear of the frame
Sir You made that look like a breeze, GREAT JOB Sir, many thanks for sharing and have a super GREAT week!
It’s great to see manufacturers integrating towing hitches into the trucks, and as it appears the kit contained many details such as fasteners with loc tight already applied. I seriously considering an F 250 purchase myself I’ve been impressed by many of Fords features over the other big three and I like the 6.2 gas engine as well.
So you have the let number for the hardware kit by chance?
Is this pretty much the same instructions for installation on a 2019?
Electrical know outs work much better for cutting sheet (
Ziebart is worth its weight in gold on new vehicles. I have lost 2 vehicles to rust, never again.
Being from Maine, I would have slathered some anti-corrosion goo all over everything under there while the bed was off.
Good Stuff, Great Tips 😃👍🏿2016 F250 XLT 6.2 Flex 4D 4W 6.5Bed, The bed removal was awesome thanks!
Great job‼️ Can't believe that truck didn't sell. Looks like a nice ride. Glad you got the best deal!!
Great video.. Curious Part number for the kit? (I have the same Superduty)
and $$ do you pay. I realize its been some time just looking for an aprox.
Beautiful truck and very informative video. Thank you for sharing.
Yackity Yack. Don’t talk back, is that how the song goes. LOL
What a great demo. Much easier to see what goes where when he removed the bed. He made it look easy taking it off.
I purchased my truck with the hitch kit. I love it to tow, but when you have a load of gravel/compost etc. you will hit your shovel on those stupid puck every time. They should be placed at the bed level and not the rib level.
Glad you got a new rig! Nice Ride! We just keep our old ones chugging along. Looks like there may be a good thing for working for a dealer all these years after all! AND the Farmall came to the rescue one more time! Maple leaves on the ground here too. 35 to 40 tonight. You probably have snow already! I got a pal with a machine shop to put a Reese hitch on my old Ford. Wish I still had it. 330-6, 4-speed, short bed, limited slip 4x4. Beat to death but ran fine. Now I got an 89 Taco with a 4.3 4x4 but it's paid for. What else can I say.
Freezer fillers. One of my last jobs last fall the boss cooked up a mess of fresh tenderloin biscuits for breakfast. I had 3 and wanted 3 more but I'd been snoring on the dozer. I only hunt with a knife and fork and never miss! Take care, Pal!
Seems like most manufactures have their stuff prewired predrilled premarked, etc
So, have you put a CAT in the F-350 yet? LOL
Always enjoying watching your videos. I've been keeping up with your tractor videos, and now I'm viewing your older stuff.
Squatch253 if you don't mind me asking, where did you buy this 5th Wheel/Gooseneck Hitch Package. Where it has both the 5th Wheel, and the Gooseneck in the same "package". Please and thank you!
What about the trailer light/brake connector? Would make sense to install it while the bed was off
I would like to find a deal like that. Nice truck! These factory hitch setup packages are really nice!
Vicki Poe I am with you, I'd buy a new truck that way also.
Does this kit come with a wiring kit for the inside of the bed? When I called the dealership today he said it looks like it does but didn’t give a 100% answer. Was wondering if you knew about this?
Thank you in advance
I want to install this on my 17 250 4x4 shortbed cc power stroke. you think install will be the same straight forward
Are you in Canada?
Nice! think if was me when had bed off…. I would have sprayed a under coating of some kind on everything if lived in area like you do! So as to help preserve body and parts of the truck! As well as put drain holes in the holding areas that hold moisture and debris even if just use liquid weather stripping chalking to fill in pockets gaps and voids!
@@squatch253 cool just too much money to see it rust away! So did you fix the pony motor leak?
The reason the box bolts are a one time use only is because when they torque to the appropriate level it stretches them
This is still a steel box? Not worried about the holes rusting around the hole saw cut edge?
Do have the part number handy? I have an 08 f250 and would like to get it for my truck. Thanks new sub
do you have the part number for the kit.. I have a 2015 Super Duty. someone drilled holes but it was not a Ford Puck system not sure what system they installed so may need to re-drill holes (I hope not) if you could also give me the spacing between the holes and distance from the front bed wall to the fist hole that would help.... If not no problem i understand....
Very good video!!
How do you remove and install the ball? I got a new truck and I can't quiet get it to work. I just pull the center black plastic piece up? Correct?
@@squatch253 thank you. I think the previous owner must have had a trailer on the ball for 80,000 miles. Im coming to the conclusion the the black plastic has fused with the metal ball.
do thy have one for a 2005 f250 if they do can i get a part number
nice work on the video.. short and to the point. good job!
nice work. but check your safety chain hooks them factory are hard to find a hook the will fully hook on them . keep up the good work.
Nice Truck
Good video... make sure to prime/paint your hole saw cut.
So some clown that owned my truck before me cut the ball and neck off of the hitch and I’m not sure how to get it out and don’t want to pull the bed off. Any ideas?
Hi there, partially related to your video, can you tell me the brand of your bed cover? Thx. Tracy
How would that work on a f150 fx2
you don't happen to have that part number do you? I'm supposed to have my 2018 F250 delivered tomorrow and the dealer is telling me that the trim/plugs aren't included in the kit...???
Thanks for the quick reply! My truck did show up with the trim rings and plugs still in the bag in the back seat of the truck! thank you for checking into that for me! keep up the videos!
Great video. Nice camera work, great editing, & no Blabbering.
Do you have a part number for the kit you installed?
Just found your channel. As an avid RUclips viewer I appreciate your camera work and editing. I’m a new subscriber!
I would give you multiple thumbs up if I could. Well done!
would have put touch up paint or atleast clearcut the holes
does the install kit come with the tracker and straps?
Wow I had no idea that the prep kit was available aftermarket I've been looking for used super duty with the prep kit and I passed on the perfect one 3 weeks ago because it didn't have the prep kit fml
if you didn't find it , I have this exact thing for sale now. With 27.5k hitch
I have the frame crossmember in my 2015 truck but not the holes or trim rings and covers. Does Ford or someplace else sell the trim rings and puck covers? I don't want to drill holes until I get all the rings and covers,Thanks!
Is there a light pug in the bed area or do you just run a long pig tail from the bumper?
I am installing one on my new to me 2016 f350 dually. Quick question, do you know if the new nuts for the bed bolts are supposed to be smooth as in no threads, all 8 of my new bolts are without threads? Are the new bolts self tapping? Maybe that's why ford wants them replaced? Thanks
I need help!!! My buddy gave me the side brackets and crossmember, but I don’t have any of the bolts. Ford dealership says they can not sell just the bolts, as i will have to buy the entire package. What do you think I should do?!?
Squatch, I'm sure it's been asked before...whats that part number to the kit? Same size bed here. 2014 6.7 but shouldnt make a difference. Good find on that truck though!
I'm trying to locate this prep kit and I am having difficulty finding it. Do you have a dealer or vendor that has this kit in stock?
Thanks so much for that link. They indicate that they can ship within 1-3 business days and I've sent them a request for availability. I also was able to locate the in bed wiring harness at www.oemfordpart.com/oem-parts/ford-trailer-wiring-harness-in-bed-hc3z15a416a. Thanks again for the information and for the informative video.
Hey Squatch, just wondering about rust on the sawn hole edges in the tray. Would it be worth sealing them with paint for protection or will the rubber seals keep them clean and dry?
I have a 2016 f250. My buddy gave me the puck system and brackets, just not the nuts and bolts. Do you think grade 8 bolts would work?
Do you have a part number? I have a 2013 F250 srw I need to do the same thing but I am having all kinds of trouble finding this puck system. And what was the price?
Is it the same setup for a 2017 350 short bed gasser?
Another great how to install DIY video! Which is better a puck type prep kit, or rails? I like the puck setup better than rails, just by the looks. Actually I guess I am referring to the below bed rails vs the above bed rails.
I'm thinking of getting a 2018 F350 soon. What are the chances of having you do this for me? I'm not very handy, nor do I have the equipment to do it. Where are you located?
Can you please list the exact part number for this hitch?. I have a 2014 and would like to do the same thing to mine before having the bed lined
As long as the box is removed have it sprayed with bed liner inside and the bottom outside.
It is best that the box be dyed with plastic material to maintain the pigment, On the whole your work is very cool and neat
Where did you purchase the Kit? Ive got a 2020 F350 and would like to do the same.
Very informative video. Thank you!
great install and video love your channel
500 dollar option. How much was the kit?
Good job. Nice truck. Thanks for sharing.
Can you please share the part # for this kit.
Can you please share the part # for this kit.
Can you please share the part # for this kit.
Excellent video----thanks for posting
I’ve owned fords my whole life love their truck drive a ranger 69 model for 25 yrs wish I had kept it
Can you do a video of the fifth wheel / gooseneck trailer wiring plug install inside the bed of the truck instead of just running your trailer wiring down to the bumper plug?
Great job! I am buying a 2012 Lariat with this already installed. I use a Cab Over camper and may need to use a bigger rubber mat. Now I know what this feature looks like in the bed. Thanks.
hey man, great video showing the install. I am looking to put the frame in my 2015. I managed to find a used frame for a good price, but it doesn't come with the hardware and was wondering if you by chance knew what size bolts came in this kit to put it all together and mount it to the frame?
Cool system.
I'm thinking that this is the correct way to do things. Especially by using O.E.M. parts and accessories, they're guaranteed to fit, and I presume are also covered by Ford's warranty too, in this case?
I was trying to see what size of engine is in that truck; I imagine it's an optional ( larger ) then stock by looks of the exhaust pipe?
I like the looks of 'plain' model trucks, it lend's itself to be easily 'customized' at will.
Yeah, I kinda thought it was a tad larger gas. engine than stock. that 6.2 can haul for sure.
Those were my thoughts too on the diesel option, especially if you're not doing an awful lot of towing and driving, like you mentioned.
Ahh, the price advantage is always nice to have . But the way they all fit is a great big plus to; you're correct!
@@squatch253 I couldn't agree more on all the new Diesel trucks from any brand, they're great when the factory is on the hook to fix them but loosing the high pressure pump on a Ford 6.7 will just about bankrupt a guy! The cost to purchase, maintain and repair a modern diesel in a light duty truck makes the diesel a loosing proposition for me. Keep up the good work!
Thanks for the video, very helpful 👍🏻
Bet you can't get those box bolts back out by now. Lol. Gotta cut the heads off all the ones we put boxsides on.
Is that a diesel truck or a gas truck
Need to use tape before cutting holes and also paint the raw steel so it doesn't rust after
Great job! Also very informative, Thank you.
Não consigo encontrar o chicote traseiro da f 250 4×4 ano 2011 diesel cumins
Do you still have the part number for this prep package?
You need to seal up the new edges of the holes so they do not rust.
No wonder it sat for over a year...350 Gas? Not ideal
The etrailer hitch is a good option for those who can't lift the bed off.
Squatch, great video! You seem to be a great mechanic, and you describe and explain things wonderfully. I just bought the 2018 350 Superduty. It did not come from factory with the puck system, so I went to Ford Parts.com and ordered the kit. Here’s my question. The 4 ¼” and 3” holes that are drilled in be bed of the truck seem a bit large. These holes seem to give about ½” gap or a bit more. I understand that the finishing rings will cover the holes, but only by about 3/8”. Does there really need to be that much clearance, or would a 3 ½” and 2 ½” holes be sufficient? These holes would still provide ¼” clearance all the way around the whole. Just seems that removing the least amount of material is best, and not taking any chances that the cutout will sneak beyond the finishing ring. Any and all positive, helpful comments welcome, and thank you again for your videos.
BTW, the instructions in my kit do also call for the 4 1/4" and the 3" holes.
Hey Squatch, thanks for the input. Interestingly enough, I had just finished my project when I saw that you posted. I did end up going with the recommended hole size, and I'm glad I did. The extra wiggle room when lowering the bed, even with the factory guide pins, was good to have. And ther really isn't excessive clearance and the rings cover nicely.
It's very interesting that you said you do them at the dealership. Our dealership in Rapid City wouldn't touch it, said it was a liability issue.
Anyway, thanks again, and by the way, the Moline is looking great!
You don't mention how tight to tighten the bolts, what was the ft. lbs ?
Good Job, however like mentioned below touch-up paint on the cut edges would have been nice to finish it off.
Squatch123 Just wondering how you marked the holes in the bed before cutting...meaning so the holes would match the metal mount , holes lined up , looked centered etc? This video answered alot of my questions so i can install mine lol Thank for any help.
Since this is a ford accessory I believe he mentioned the box was already pre-dimpled for the holes.