How to make a Steam Engine. homemade powerful steam engine with boiler.
HTML-код
- Опубликовано: 15 окт 2024
- Hello friends, welcome to our channel. this video is about the build of steam engine. This steam engine is fully made of iron. the base plate is made up of 6mm thick iron plate. the cylinder is made of 21.5mm thick and 87mm long iron rod. this iron rod is drilled with 10mm drill bit and its drilled from side for pressure. piston is made from iron rod and its grinded to make it 10mm thick accurately so that it can easily slide in cylinder with 10mm bore. the valve cylinder is also made with 21.5mm rod and it is 64mm long and it is also drilled with 10mm drill bit up to other edge. valve cylinder has two hole side to side for passing pressure to cylinder. valve piston is 10mm thick and has one hole and opening at the edge for pressure passage from boiler to cylinder and then back cylinder to surrounding. the pistons are connected with flywheels by connecting cranks. In starting of video small wheels and small boiler were used but later in the video bigger wheels were used to increase momentum and bigger boiler was used to increase pressure. three flywheels are fitted in two brackets. wheels are made on our homemade mini lathe machine. the central wheel is bigger and heavier to make more momentum. the boiler is made with 114mm hollow iron pipe and it is sealed from ends with iron plates and edges are sealed by gas welding. burner is fitted at the bottom of boiler to make steam of water in boiler. the pressure from boiler to engine is passed by 10mm hollowed iron pipes. boiler has two holes on it, one to pass pressure or steam to engine and other to fill water. this hole is sealed with long bolt while operating the engine. This Steam Engine is very powerful, strong and it runs very fast. I hope you enjoyed the video and liked the video.
thankyou for watching
NOTE: This is an official video of APS Tools channel. the reuploadation of this video in any way and by anyone is strictly prohibited.
ATTENTION: The tools and machines used in this video may be dangerous if used improperly so don't try to use them at home without any training or without the supervision of an adult.
Please Subscribe my channel, like and share my videos and please comment.
your support is inspiration for me, so please support me so that I can share my ideas with you.
Thankyou
APS Tools
#apstools
A boiler without a safety valve is a bomb! A least get a pressure gauge on it so you know when to leave the house.
Is a safetey valve just a valve you can open to release the pressure
@@peytonbrown2440 A safety valve is a valve that opens automatically when a certain pressure is reached. A heated container needs a safety valve to protect from an explosion. The hot water heater in your house has a safety valve on it. The valve is usually controlled by a spring. Some model steam engines use a valve with a weight on it .
@@briannemec9214 yeah
@@peytonbrown2440 nop, but i putted one
Yolo
Agree with the safety valve, but everything else is amazing. You are an artist with the limited tools you have! It proves you don't have to have a fancy workshop full of tools to make something amazing, well done again my friend!
Sir, you have my respect. This is probably the best do it yourself video I have seen yet. Done well with a touch of intertwining camera work, and a huge dollop of ingenious hands on fabrication , along with the video record of the process, yup, definitely among the top three I have seen. Great vid sir, keep them coming.
This is madness !! Firing up ANY boiler without a safety pressure relief valve is not only illegal but also insane . The valves are readily available or you could make one yourself by using a simple plumbing fitting and instead of fitting a pipe block the hole with a thin piece of aluminium as a burst disk .
Great effort ,but would like to see a Safety valve !
I think there is one... those joints in the connecting tube!
@@ydonl lol 😂
Awesome! I will buy you a drill press lol. I'm incredibly impressed that you achieved a piston fit bore and cylinder eyeballing it with a hand drill. But it goes to show that anyone can get into machining with a little determination and basic tools. No excuses... You don't need a bridgeport, bench lathe, or even a drill press (though a drill press can be functional and game changing for under 100$).
Yeah he has that sussed out .
I've got 12000 doller lathe but need someone to show me how to use it . Cause I'm sure that's all it takes . So why so much work in making things in the thousands and this and that all . I'm very aware of the involvement of microns and wank wank. Look I'm welder panel beater fabricator and I make plenty with out the lathe.
Cause fitting machining very very very involved in measurements and acrucy is required for the out come welding is the same and with all the things you can do process all welding type's none could or even do the whole lot Cause in ierrelistic time it's too much and what are some people doing life time of training to do every process noone ever has done that , and why I know this . Cause everyone of us that would try that ,would soon realise very quickly that there full of shit . Totally and it's physically impossible in one life time to do something like this stuff, and get it we're you are brilliant at all module's and theroy and your metal urgey subjects as well, two or three life times I'd say yep it can be done .
But I do know as I done more than enough welding and courses to know this machining and fitting would be as hard infact it'll be harder. Way too much for even the passionate welders and machinists out there . If anyone has,, well then I'll take my hat off for that person that every employer will be looking very very very closely at this person who even try's to claim this fame . I'd know pretty quick just how they set themselves up on there work bench. That's how an employer will know if they have done such work ,as I know ill be looking for peoples grey hair and there age even before the work bench thing I mentioned before.
So this guy rocks with that little steam engine hey . 10 outta 10 .too good
But there we are .
I'm still hoping to find some one to show me some basic stuff in machining so that I can a lest use my lathe safely and correctly.
@@michaelward2869 what state you live in?
Terry from South Carolina
That's not possible, he didn't do it himself .
If I need to buy already made steam engine from you, how much is the cost? What HP is it? Please your contact email address
I've been drawing and playing with materials trying to make a miniature boiler that runs on waste oil or finely crushed coal. Once the engine is running, it could drive a small fan to force air into the firebox and a screw\auger to feed coal. So you'd light the boiler with paper and sticks and feed it manually with fuel until it can drive the engine, then it starts blowing oxygen in and slowly feeding in crushed coal\charcoal. Then put the whole thing on a raft and have a model steam boat.
Good
Beautiful. A true work of art. As a train enthusiast I found it fascinating and enlightening. Thank you for sharing this video.👍✌️🤔🧐🤨😳😲🤯
Thankyou
You built a steam powered earthquake machine 😂😂 awesome video!
You made the engine, 💖 now make a advance for the valve 😎
listen to the boss,,,,, don't forget to stop by for black coffee together... goes duit and goes natural so that you will increase your enthusiasm for work and add brothers thank you very much
बहुत अच्छा है जीवन में बहुत बहुत उन्नति करते। रहो बेटे
Absolutely great commentary… I really loved how you explained everything that you did…
Thankyou
Thanks
Awesome now I know how a steam engine works great job man...
Yeah bro that's really cool .
Next you'll need a little tesler genorater to be able to make power . Then ramp it up like make a ducked big machine once you know its not going to explode. Then power up your home as a back up source of electricity.
I had made that I would be proud Very impressive If I had made that I would be Proud
First real tutorial I have seen, NICE!!
But this is a timer bomb, put safety valve and a pressure gauge in the future, otherwise GREAT
amazing. ı wanna make it And just watch and listen this engine
beautiful work. thanks for sharing
What a fine boiler you have made., but it would be an easy 5 minute job to drill,tap,and fit a pressure release valve
Neat engineering
Please support me friends and share the video
Great sir turbines banane ka idea de diya meri ibr boiler manufacturering factory he
Good job
Thankyou
Happy to subscribe, The music matches what's going on in your mind so let's just celebrate all of , Creating
Awesome........
Thank's for your explanation, I'm a teacher of vocational school , Machinery program ,live in Indonesia.
Permit me to make this steam engine with the bigger size by learning and copying your content.
I don't think you need permission, but it would be nice to know that the designer has given you his blessing. If he doesn't respond, I would assume it's fine to build as a learning aid, and considering he posted it on RUclips publicly without any assertion that it was copyrighted or that it shouldn't be duplicated. If that's still an ethically grey area for you, there are even simpler patterns online that are specifically posted as pubic domain and meant to be copied... though I seriously doubt this designer intended it to remain his intellectual property.
Impresionante la idea del hombre para fabricar ese tipo de máquinas de vapor.
Thank you!
That's all nice and good but a steam engine doesn't work with the steam it produces but by the difference in pressure when the steam condenses, you'll have a lot more power than just funneling steam into a piston and it is enough to insert a condenser in the cycle at the outlet of the boiler and to recover the steam after the transformation of this energy into mechanical energy (the piston) that you reintroduce into the boiler. Thus the circuit is closed and the pressure becomes considerably high, moreover you will not have much water loss. Recalling here the first principle of thermodynamics: "energy is produced by the dissipation of heat" it is the dissipation capacity which will give the power and not the steam as such since it is limited to its point of Curia. (max. point of temperature before boiling or change of state - function of atmospheric pressure) etc.
أحسنت صنعا أقدر مجهودك بأدوات بسيطة لك فائق الإحترام والتقدير أتمنى أن تحصد ثمار جهودك دمت بخير صديقي
❤❤❤❤❤❤❤❤❤❤❤good
Excellent effort. With basic tools you have implemented a very impressive engine. Many of the readers here have absolutely no practical experience like you have!!
Thankyou
Neat, Neat, Neat. God Bless
Hihihi ok,,sir tanks your nice utuve
the best boiling
سلمت يديك...
Finally we can made homemade supercar 😂🤣😅👏
How ?
@@tonywright8294 I'm just kidding bro 😂
relief vlv is a must and a whistle could be cool
A real tiny train. Amazing
nicely built
🙂 This video was great to watch 👍
Can do with a safety valve, steam is very dangerous :)
Beautiful
Good project
Nmskar bhay ji
Very nice video... well done....keep it up veerji
واااقعا دمت گرم فوقالعاده زیبا بود
Wouls have liked some explanation of what you were doing, dimentions.....
Could you please make an, instruction and pieces list and what you used in the video, it would help a lot.. With everything like exsact measures and what not?.
The best.. I have ever seen..
Mantap ini..
Yes, a safety valve would be better. It's a wonderful job done without all the clutter of tools and mechinery.
Good job but if safety is done
good job..
super!!
Its good for powering electric generator but you need to have fuel,woods,whatever to make heat
There is some leak but that fixes the no need of safety valve, leak safes the day
Nice
👍💖💖💖🙆
Congratulations man.
Fantástico job, the best.
Dude i'm totaly impress ! Good job really... You work with the metal very well. Beter than me ! Are you a mechanic ?
👍🤓
This is so cool!!
yes,, safety valve.. you can make one quite easily
It is easy with compressed air...make one burning wood or coals...come on!
Good
Good 1st design. Would like to see any update
Great job,
Mantap👍👍
👌👌👌
Does anyone know what type of steam engine is this? Particularly the type of piston cylinder used. That would be helpful for our thesis.
Local me ghumne ke liye acchi he
Ok ka sir,,
Magnifico!
Top.... Perfeito.
Pretty good toy to demo Kindergarten via video . Way too dangerous to be in the same building with it while operating. Didn't see a ruler , cutting oil , lubricating oil. I liked the belt sander he built best of all. It can actually perform some real work !
Gostei top
Is this powerful enough to make a 12 volt generator?
amazing.
dont forget to make another video of the boiler exploding when it overpressurises and kills somebody.
you clearly have no idea about the forces you are playing with there
Honestly, he could have just drilled another hole and added a pressure relief valve
Overpressure alone is not enough to burst a completely sound boiler
Am I right in thinking you need some sort of test certificate if your boiler is above a certain size ? it does need a safety valve though.
i would like to make this , please can i have some drawings and dimensions , thankyou kindly
A boiler without a couple of safety valves?
It's not a bomb.
It probably will never reach that kind of pressure because it just about leaks more than it uses. it isn't a high pressure boiler. If it ever reached any kind of pressure to burst something it would most likely open a seam somewhere and spew some steam out. That could be a bad thing, but give the guy a break, he made it work, you're just picky. By the way it looks, the whole thing IS a safety valve.
Absolutely right mate,im always been fascinanted by steam Power. These People need to Learn that overpressure alone is not suficient to burst a boiler,only something bad would occur if wear and rust where present
Muito bom parabens
Music too loud for no reason 🤦
👍🏼👍🏼
Nói dai, nói dài, nói nhiều... nó thuộc về dân tộc tính...
Nhiều dân tộc nói to và nói nhiều...
I don't care if you have a safety valve or not. It's your face, just make sure it doesn't ruin the hobby for the rest of us.
Looks ok but lacks drive pulley
If this can move a 12 volt motor to charge batteries, can I buy one of these from you?
Yes, I can sell you one. You can contact me on amritpalsingh44556677@gmail.com email
what is the price, and can you deliver to Egypt, if not can I buy the design?
I can sell you the product. You can contact me on amritpalsingh44556677@gmail.com
👍🏻👍🏻👍🏻👍🏻👍🏻
Now power something with it otherwise it's pointless
what have you used it for ?
Also watch this bike build on our channel
ruclips.net/video/9OQbP0wawmw/видео.html
somethings gotta give
Mantap
Пар идёт из всех щелей, поэтому и нет предохранительного клапана и манометра.
В описании сказано мощный двигатель. Но он не мощный. При попытки снять с него работу он просто остановится, а пар сильнее пойдёт из щелей.
Когда уже Ютуб мастера догадаются использовать уплотнители, а не удивлять всех качеством притирки деталей?
NEVER MIND GIVING IT A THUMBS UP -IF IT ISN'T EFFICIENT, IT'S CRAP- DO ANOTHER VIDEO SHOWING IT DOING SOME WORK -BETTER STILL, WORK OUT ITS POWER OUTPUT