Powerful steam engine build. Homemade steam engine.

Поделиться
HTML-код
  • Опубликовано: 7 апр 2023
  • you can buy tools from amazon that i used in video;
    Dewalt grinder machine:
    amzn.to/457pJLz
    Bosch gsr 120 li 12v cordless drill
    amzn.to/464mlm0
    amazon basics drill bits
    amzn.to/3LxXE91
    Hello friends, this video is about steam engine build. This engine is a single cylinder engine. Its cylinder has 12.5mm bore with depth of about 100mm which makes it 12.2cc engine. Bigger flywheel is fitted to engine to increase the moment of inertia and greater power. the flywheel is 100mm in diameter and the inner holes are made from 40mm hole saw. this engine has a sturdy and durable crankshaft which is made from 10mm thick and 6 inches long threaded bolt. connecting rods are made from 1.5mm iron plate. valve is made from 20mm rod with 11.8mm bore and its piston is 11.77mm approx. with single acting arrangement. To run this engine I used the boiler that I had made in the previous video. This engine started working at about 7.5psi pressure.
    I hope you all enjoyed the video. Please like and subscribe my channel.
    Thankyou
    APS Tools
    #apstools

Комментарии • 138

  • @apstools5521
    @apstools5521  10 месяцев назад +22

    Thankyou all for watching the video. Please suggest what should I build in next video.

    • @vladooom
      @vladooom 10 месяцев назад +2

      what you did sir is very professional, is it possible to attach a permanent magnet synchronous generator so it can produce electricity? and what to take into consideration in order to attach it to the generator? thank you

    • @apstools5521
      @apstools5521  10 месяцев назад +1

      ​​@@vladooomvladoom, Thankyou for suggestion sir, I'll work on it.

    • @shropshirehistory908
      @shropshirehistory908 8 месяцев назад +1

      @@vladooomI guess he could put a pulley with a belt running to something like a car or lorry Alternator for single use to power a light or to charge a battery system to power numerous things..

    • @starcitizenmodding4436
      @starcitizenmodding4436 6 месяцев назад +2

      Stirling Engine 🥰

    • @sanjoypal395
      @sanjoypal395 6 месяцев назад +2

      Stirling engine

  • @stevegpsych68
    @stevegpsych68 10 месяцев назад +48

    Brilliant man. No lathe, no milling machine, no worries. Many people don't appreciate the skill required to achieve this build without the fancy gear.

    • @gowdsake7103
      @gowdsake7103 8 месяцев назад

      There is NO WAY that cylinder is steam tight

    • @shropshirehistory908
      @shropshirehistory908 8 месяцев назад +1

      @@gowdsake7103it’s not you can see it’s exhausting steam out the end of it..the small piston is pressure in…so I’m guessing as I’m no engineer that one piston runs the other…one pushes one pulls..the long one also exhausts the steam as well as having just enough pressure to push it back over on the return for the other to pull…and repeats cycle…I could be wrong.

    • @randallmarsh446
      @randallmarsh446 7 месяцев назад +2

      @@shropshirehistory908 Ive seen old timers walk into a junk yard and build some of the most impressive machinery outa junk ...

    • @briannemec9214
      @briannemec9214 5 месяцев назад

      @@shropshirehistory908 When the holes line up in the small cylinder ,valve, the steam goes to the large cylinder and pushes the flywheel. As the flywheel turns the small rod is moved and the hole is blocked. The steam cannot flow to the large cylinder. The other side of the small rod is ground so the steam from the large cylinder is not trapped, but can flow out of the large cylinder. This ground spot can be seen at 12:50, is very quick. The large cylinder has one purpose , to push the wheel. The valve does two things 1. allow steam to flow and stop the steam flow and 2. allow the large cylinder to empty out the used steam. hope that helps.
      ruclips.net/video/D5ylCxp6owA/видео.html

    • @lulamilenyamazana7342
      @lulamilenyamazana7342 2 месяца назад

      No welding machine 😂😂😂

  • @raymondallenjhangiani7670
    @raymondallenjhangiani7670 11 месяцев назад +12

    Nice model 👍 the most interesting part is the reciprocating steam inlet valve !

    • @randallmarsh446
      @randallmarsh446 10 месяцев назад +1

      it is ..i was kinda thrown for a loop for a bit the way he designed it. but it definitly works no doubt!

    • @gabereiser
      @gabereiser 7 месяцев назад

      The flattened end will let the air out the end of the slide valve when fully engaged and then let air in through the hole when the valve retracts.

  • @chrisstaylor8377
    @chrisstaylor8377 4 месяца назад +3

    Nice work,safety valve on boiler to stop it blowing up

  • @jormasoukka833
    @jormasoukka833 10 месяцев назад +4

    Hyvä suoritus vähillä työkaluilla! Kiitos rakennus ohjeista..

  • @user-us3dp7tb3m
    @user-us3dp7tb3m 9 месяцев назад +3

    The model is great and the work is great. 👍

  • @kerplunkboydotNET
    @kerplunkboydotNET 2 месяца назад

    This is fantastic! A potential "all fuel" generator! Add some magnets, a stator and you're it!

  • @mikeflight9
    @mikeflight9 Год назад +4

    Absolutely brilliant work. 😃👌👍👍👍

  • @vladimirgorea8714
    @vladimirgorea8714 11 месяцев назад +2

    nice. now make it to recirculate the water

  • @ramzeneger
    @ramzeneger 5 месяцев назад +1

    I absolutely loved it thank you very much!

  • @steamblack2594
    @steamblack2594 9 месяцев назад +2

    gracias! tremendo motoraco te mandaste

  • @cristianonasimento454
    @cristianonasimento454 9 месяцев назад +3

    muito interessante , funciona mesmo

  • @jairomota5825
    @jairomota5825 11 месяцев назад +1

    parabéns ficou show

  • @JustFun-iz9rf
    @JustFun-iz9rf 10 месяцев назад +3

    respect to your build. Nice engine

    • @apstools5521
      @apstools5521  10 месяцев назад +1

      Thankyou brother, my regards to you

  • @robertoencinas1478
    @robertoencinas1478 10 месяцев назад +2

    Muy buena la máquina de presión a vapor, felicitaciones un saludo de Argentina, ♥️🇦🇷🇦🇷🇦🇷.

    • @apstools5521
      @apstools5521  10 месяцев назад

      Thankyou sir, warm regards to you

  • @yushanthan
    @yushanthan Год назад +3

    Very nice art❤

  • @enderboy123me
    @enderboy123me 8 месяцев назад +4

    I really commend the skill required to make a build this professional, without any fancy professional expensive machinery. Just an ordinary angle grinder and a hand drill is all it took. Amazing work!

  • @Reza_6713
    @Reza_6713 Год назад +2

    Easy and simple

  • @randyfrieler5524
    @randyfrieler5524 4 месяца назад

    Scotty, give me more power!!!!...Captain I think she's gonna BLOW!!

  • @othmaneothmane703
    @othmaneothmane703 Год назад +3

    Bravo

  • @sideswipe147
    @sideswipe147 Год назад +3

    That boiler though...

  • @TheStcroix
    @TheStcroix 7 месяцев назад +2

    Could you please show us a more detailed picture and explanation of how the valve is constructed?

  • @rajeevkamath.9791
    @rajeevkamath.9791 10 месяцев назад +2

    Too good. Congratulations

  • @valmiralvesramalho
    @valmiralvesramalho 7 месяцев назад +1

    Sensacional !!!!

  • @lonniemaggard6737
    @lonniemaggard6737 7 месяцев назад +1

    ❤that's pretty cool 👍

  • @RanbirsinghSweety-is8hk
    @RanbirsinghSweety-is8hk 4 месяца назад

    Well done i appreciate your creation thanks for your modal

  • @paulocesarpalopoli2182
    @paulocesarpalopoli2182 11 месяцев назад +2

    Nota 10 muito bem feito, qual seria a potência Hp🙏🇧🇷

  • @paolodelfini2324
    @paolodelfini2324 7 месяцев назад

    Davvero complimenti, bravissimo. Forse ti direi di collegarlo ad un generatore di corrente, sempre costruito da te 😀.
    Ancora complimenti sei un grande. Ottimo lavoro

  • @randallmarsh446
    @randallmarsh446 10 месяцев назад +2

    this a very well thought out idea without having to use complicated machinery such as a lathe and a milling machine,, just standard tools that the average person can afford . Do you have a parts diagram with specs? And one last question ...imm not a matha matician by no means but about how much horse power do you think this steam engine you built puts out?just thinking this would be the ultimate backup power source for a dc generator or a a/c generator. for a backup emergency plan in case of a disaster ,,or a wwcrisis .. never know what these little ideas can be in time of need.ty for your time in doing these things . this generation needs more pepole like you who are taught to use what they have on hand and not whats they have to buy ...like the brain..lo!

  • @irpanklahay8565
    @irpanklahay8565 7 месяцев назад +1

    Mantap...,coba buat pembangkit listrik tenaga uap tapi jangan pakai api buat memanasin air untuk menghasilkan uap,coba ambil elemen pemanas air listrik

  • @RC-Heli835
    @RC-Heli835 Год назад +7

    Awesome work man! I suppose the little cylinder cuts the pressure off while the large one is on its return stroke?

  • @johnwalker1471
    @johnwalker1471 11 месяцев назад +5

    Amazing what you did with fairly simple tools! Even with much better tools I still have built an engine.🙁

  • @chrisstaylor8377
    @chrisstaylor8377 4 месяца назад +1

    Great ,but you need a proper visa on that drill

  • @deniskey1844
    @deniskey1844 10 месяцев назад +2

    Scary boiler i dont see a saftey valve if the engine locks up for any reason somthing gonna blow.😢

  • @gwheyduke
    @gwheyduke 10 месяцев назад +2

    Fire! 🔥😳 Good job on the engine. Runs great! 👍

    • @apstools5521
      @apstools5521  10 месяцев назад

      Thanks 👍

    • @Recoletor
      @Recoletor 9 месяцев назад

      ​@@apstools5521
      Can you make the same steam engine, but make it out of wood?
      🤔

  • @carlrav5660
    @carlrav5660 3 дня назад

    If we could somehow.... harness this energy....hmm

  • @stevenblack4599
    @stevenblack4599 8 месяцев назад

    You can’t beat a pair of safety flip flops

  • @earlsammesios8696
    @earlsammesios8696 9 месяцев назад

    Gd nice ixpiremint

  • @ogreunderbridge5204
    @ogreunderbridge5204 8 месяцев назад +3

    Meanwhile I´m sitting here, in "need" of a metal lathe to change a light bulb...
    Good job, man !
    ...If you replaced that music thing with rather just keep your original work audio, this video would be worth enjoying for quality time.

    • @billharrison3174
      @billharrison3174 5 месяцев назад

      I,ve had a meta lathe for 10 years but have never used it or needed it to change a light bulb, I use a step ladder, some of the comments on here leave me speechless.

    • @ogreunderbridge5204
      @ogreunderbridge5204 5 месяцев назад +1

      ​@@billharrison3174 I´m talking about overcomplicatifying things that really can be done as simple tasks. But due to mentality of needing best of the best in specialized tools, stops a regular garage Joe from getting much done at all.
      Chill, dude :)

    • @billharrison3174
      @billharrison3174 5 месяцев назад

      looked up "overcomplificatifying" in my 1967 Oxford high skool dictionary dictionary but could find no such word, I dont know if you are in "the country that the man with the orange hair was going to make great again but if you dont get this piss take then you truly are "an ogre under the bridge" where I live we are truly over "americanisms" where people say "i,m going to the bathroom, " when they mean "i,m downloading some brown files, or I,m taking a piss, but I digress, get to know when its a piss take, as 50 + years in the electrical trade I,ve probably changed more light bulbs than you,ve had hot dinners, and in any case my lathe weighs something around 80+ kgs to you 80 x 2.2, and I wouldnt be able to lift it anyway and since it was manufactured in 1961 it dosent have light bulb changing software (or hardware) Dont change many light bulbs these days asmy wife says anyone over 70 yrs cannot survive if their feet are more than 2 ft off the ground, have a nice day and hope I didnt waste too much of your precious time reading this diatribe. @@ogreunderbridge5204

    • @ogreunderbridge5204
      @ogreunderbridge5204 5 месяцев назад

      @@billharrison3174 You have a lot of piss and vinegar in you, I can understand that, got some myself. But you ought to lighten up on those descending assumptions. You dont know me and you´re not even close to bullseying the target. Lot of fuzz to put to a random youtube video compliment. It would be a better societal influence if you use your golden years filming yourself doing interesting projects, share your various experienced insights, put it to youtube, earn a little extra at the same time you can teach the rest of us wet behind the ears, ignorant noobs things about both this and that. Put you lathe to use.

    • @ogreunderbridge5204
      @ogreunderbridge5204 5 месяцев назад

      @@billharrison3174 You have a lot of p... and vinegar in you, I can understand that, got some myself. But you ought to lighten up on those descending assumptions. You dont know me and you´re not even close to bullseying the target. Lot of fuzz to put to a random youtube video compliment. It would be a better societal influence if you use your golden years filming yourself doing interesting projects, share your various experienced insights, put it to youtube, earn a little extra at the same time you can teach the rest of us still wet behind the ears, ignorant noobs things about both this and that. Put you lathe to use.

  • @nitinshinde5203
    @nitinshinde5203 10 месяцев назад +1

    Great work 👍

  • @user-gw7ds9bd5f
    @user-gw7ds9bd5f 16 дней назад

    None stop

  • @gongbillies
    @gongbillies Год назад +4

    The music though

    • @str11pes
      @str11pes Год назад

      was like 15 more minutes of this after 5 minutes, fk

  • @randallmarsh446
    @randallmarsh446 10 месяцев назад +1

    Do you know anything about hydraulic pumps and the different kinds there are?

  • @royallan3717
    @royallan3717 10 месяцев назад +2

    Nice work,I’d recommend a pressure safety release for the boiler

    • @bigriggc5828
      @bigriggc5828 10 месяцев назад +1

      I keep seeing this and makes perfect sense, but can you make one, or how do you know what pressure is too high

    • @royallan3717
      @royallan3717 10 месяцев назад

      @@bigriggc5828 it’s basically a needle and seat with and adjustable spring to release pressure at a given amount.if the engine runs on air at 50 psi you wouldn’t let the steam pressure get too high and want to release it.
      The boiler needs testing to 3 x it’s working pressure full of water

    • @apstools5521
      @apstools5521  10 месяцев назад +1

      ​@@royallan3717royallan3717, thankyou for watching the video. this engine works on 7.5 psi, 50psi is way to high. And I didn't used safety valve as the boiler is fitted with pressure gauge to make sure the pressure remains within the limit less than 15 psi threshold for blast and at same time to cut off the gas supply for burner

  • @user-on1ib5ot6o
    @user-on1ib5ot6o 3 месяца назад

    Это лучшая машина которую я видел на Ютубе, БРАВО МОЭСТРО

  • @kannaninsevagan3415
    @kannaninsevagan3415 Год назад +11

    Great work, had a model like this in my school days, (that was about 45 years ago). But your design and functionality are amazing. Keep up the good work.

  • @CRUZER1800
    @CRUZER1800 Год назад

    Cool... but kind of Scary...

  • @valmiralvesramalho
    @valmiralvesramalho 7 месяцев назад +1

    Produz um mecanismo de amassar latinhas!!!!

  • @dominicestebanrice7460
    @dominicestebanrice7460 7 месяцев назад +1

    I couldn't read the gauge......what steam pressure?
    Nice job BTW.

  • @freddybernal9534
    @freddybernal9534 5 месяцев назад

    👍👍👍👍👍

  • @user-er6nt5qt4m
    @user-er6nt5qt4m Год назад

    👍

  • @Baburao.uppu.
    @Baburao.uppu. 10 месяцев назад

    amazing, what is the benefit

  • @fefafafe5059
    @fefafafe5059 Год назад +3

    Nice job done

  • @ayundha.dewi.saristyaasta2253
    @ayundha.dewi.saristyaasta2253 24 дня назад

    😊😊❤

  • @engineer3127
    @engineer3127 Год назад +1

    یہ ٹھیک ہی ہے مگر سٹیم بوائلر کے لیے آگ بہت زیادہ ہے اور بہت جلدی جلدی کام کیا ہے سٹیم انجن بھی بس گزارہ ہے مزید محنت کی ضرورت ہے

  • @user-zs9ze9vh9x
    @user-zs9ze9vh9x 6 месяцев назад

    Es el mismo sistema de la vieja locomotora a vapor !!! Muy bueno , pero, ¿ En qué lo vas a utilizar ?

  • @user-bt6gi9yy6f
    @user-bt6gi9yy6f 5 месяцев назад

    ضجيجه جميل 😊

  • @DK-jt6be
    @DK-jt6be 8 месяцев назад +4

    Very nice build sir! How does steam escape the main cylinder?

    • @apstools5521
      @apstools5521  8 месяцев назад

      Through hose and then valve outlet
      Check 13:42

    • @DK-jt6be
      @DK-jt6be 8 месяцев назад

      @@apstools5521 No I mean how it escapes the main cylinder. When steam comes in and pushes the piston forward, it has to get out of the cylinder, before the piston can go back, right? I only see the inlet valve, you linked to at 13.42 - but no outlet-valve?

    • @apstools5521
      @apstools5521  8 месяцев назад

      ​​​@@DK-jt6bethere's a half cut section at back of the valve, when wheel inertia pushes main piston back hence steam out and it passes through half cut where valve piston is slided outwards and steam escapes check 12:50

    • @DK-jt6be
      @DK-jt6be 8 месяцев назад +1

      @@apstools5521 Alright, now I understand! ruclips.net/video/11SyDhKqDw0/видео.html
      Thats brilliant, Thank you very much for explaining !

  • @finnski4917
    @finnski4917 4 месяца назад

    Is there a certain angle difference the inlet valve piston and the steam driven piston should be at?

  • @naijacreditcards
    @naijacreditcards 11 месяцев назад +1

    The boiler need a way to conceall the fired in it and ensure the fire is not excess.

    • @shropshirehistory908
      @shropshirehistory908 8 месяцев назад

      He has a pressure gauge on it so I’m guessing this way it regulates heat..if it was to be concealed the temperature would rise at same time raising the pressure…with the heat escaping the pressure stays were it is

  • @krisztianveres7952
    @krisztianveres7952 9 месяцев назад

    Én is szivesen ösze álitanák egy hasznos. Eszköszt uj terv alapján ha volna hoszá értö csapat. aki segitene meg valositani uj találmányt. ( forgása fojtonos csak más mehanikus moszgás terveszést igényel.

  • @kevdev123
    @kevdev123 2 месяца назад

    So, how did you make the crankshaft?

  • @freewheelinfranklyn
    @freewheelinfranklyn 7 месяцев назад

    Great video, showing all the highlights of a great build. You made it look deceptively easy but obviously there's a lot of skill and precision involved. It would be interesting to put a pulley on it and find a small generator to try. The only thing that you could improve for the sequel is the sound track.

  • @mmmdazzagoodmemeayzzz7264
    @mmmdazzagoodmemeayzzz7264 3 месяца назад

    How much energy is it producing?

  • @jairperes7478
    @jairperes7478 9 месяцев назад +2

    Muito legal só não vi onde é a saída dos gases de escapamento .
    Más a construção foi um showl .

  • @hunter815
    @hunter815 5 месяцев назад +1

    Would work as boat engine using a propeller ??

  • @verifiedairdrops559
    @verifiedairdrops559 Год назад

    Sir you can give me this steam engine I want shift this engine on solar energy.

  • @user-yq7jv7ip9r
    @user-yq7jv7ip9r 8 месяцев назад

    รับทำใหมครับ

  • @tomosiustomosaitis9648
    @tomosiustomosaitis9648 8 месяцев назад

    must be made of stainless steel, carbon steel 1 test and corrosion

  • @cris7775
    @cris7775 2 месяца назад

    How many horsepower does that engine have?

  • @jayojoe
    @jayojoe 7 месяцев назад

    Respekt!
    But never work with gloves at a drill, very dangerous

  • @shreeshdixit3391
    @shreeshdixit3391 9 месяцев назад

    Do you sell your handcraft products to us, or making them only for your own entertainment

  • @user-np1rp2bv2d
    @user-np1rp2bv2d 23 дня назад

    اين المنزل

  • @roccodg4272
    @roccodg4272 Год назад +1

    Genratore funziona dene

  • @user-of6gj1ek9b
    @user-of6gj1ek9b 8 месяцев назад +1

    😅😅😅

  • @teslabrasileiro
    @teslabrasileiro Год назад

    🤔

  • @mohammedumar4733
    @mohammedumar4733 Год назад +1

    Where is the exhaust port

    • @apstools5521
      @apstools5521  Год назад +1

      The rear side of valve is exhaust itself

  • @philnewcomers9170
    @philnewcomers9170 9 месяцев назад

    you have not provided asafty valve

  • @AniketKumar-pd4ke
    @AniketKumar-pd4ke 5 месяцев назад

    Me आपसे संपर्क केसे कर सकता हु

  • @bobcow363
    @bobcow363 10 месяцев назад +2

    I got a suggestion for ya how about building something where you don’t use Aleve or high priced equipment that most people don’t have access to tried making a steam engine that way

  • @laiqshah3107
    @laiqshah3107 10 месяцев назад

    اس پر کتنا خرچہ آتا ھے کیا آپ بنا کر ہم پہ بیچ سکتے ہیں

  • @amphibiousone7972
    @amphibiousone7972 7 месяцев назад

    I'm tempted to stick it out....but when the builder makes 3 unnecessary cuts to them cut off what he cut away from....I know it will be much wasted time. (00:57)

  • @terrykyte1845
    @terrykyte1845 11 месяцев назад +1

    NO PRESSURE REGULATOR ON BOILER AND NO LUBRICATION ON MANY OF THE WEAR POINTS - ALSO NO PULLY TO TRANSFER POWER TO SOME SORT OF APPLIANCE

    • @danhoag373
      @danhoag373 10 месяцев назад +4

      Lets see ur effort? You can't build you can't critique

  • @tandemcompound2
    @tandemcompound2 4 месяца назад

    put a generator on it and charge your iPhone.

  • @HelihunterBerlin
    @HelihunterBerlin 6 месяцев назад

    Dont try this at Home 💥💥💥

  • @jozefa1234
    @jozefa1234 7 месяцев назад

    Just waiting you blow yourself to pieces, lucky that there is no seals so the pressure never build up.. waist of nice material.
    next video show what you make not only drilling some pieces

  • @arkiller6933
    @arkiller6933 6 месяцев назад

    Tutto ok , manca solo l'equilibriatura della biella....

  • @user-eu3hn2cn1s
    @user-eu3hn2cn1s 7 месяцев назад

    Hello, do you think it is possible to build an engine this small that can produce about 3 HP of power? I'm building a tricycle for myself. Grateful.

    • @apstools5521
      @apstools5521  7 месяцев назад

      3hp would be bigger than this one

    • @user-eu3hn2cn1s
      @user-eu3hn2cn1s 7 месяцев назад

      @@apstools5521 Yes, I believe it would be bigger, but would it be possible that it wouldn't be so much bigger, a piece of work that would be so heavy that it would be unfeasible to use it on a tricycle made from bicycles?

    • @user-eu3hn2cn1s
      @user-eu3hn2cn1s 7 месяцев назад

      @@apstools5521 Ah, I'm Brazilian and I live in Brazil, would you have a project for an engine with around 3 HP that you could provide me with?

  • @verifiedairdrops559
    @verifiedairdrops559 Год назад

    Sir give me your email address or Whatsapp number.??
    Sir me is steam engine ko solar energy pe chlana chahta hn. Mery pass idea Hy. Jis sy ye engine free me chly ga.. is k liy gas ⛽ ya fuel ya wood ki zrort nhi pry gi...

  • @kevinjones2145
    @kevinjones2145 10 месяцев назад +1

    Bravo

  • @norbertk.1473
    @norbertk.1473 9 месяцев назад +1

    👍