3rd Brake Light RESEAL | 4th Gen Ram 2010-2019
HTML-код
- Опубликовано: 27 апр 2021
- Thanks for all the support!
In this video we are going to be resealing a factory Center High Mount Stop Lamp with on our 2018 Ram 2500 after a major water leak occured. Water intrusion is a common issue that Ram truck owners frequently experience through the 3rd Brake light.
Please see the list of products used in this video below and we hope you find it helpful. Follow us as we have more content and mods COMING SOON!
Please Hit the Like button and Subscribe if you haven’t already and leave us some feedback down below. Also, hit the bell next to Subscribe to turn on notifications so you don’t miss new upcoming videos!
Need something on Amazon? Please use our affiliate link:
amzn.to/3l7STV5
Products in this Video:
- Mopar Harness - P/N P68189124AC
amzn.to/3ewq9mq
- eraser wheel amzn.to/2S3HR9a
-3m window adhesive amzn.to/3xwV2j8
Try Amazon Prime for 30 Days
amzn.to/2MQO31G
Disclaimer All information provided by MKS Performance & Offroad in this video is furnished for educational and informational purposes only. MKS Performance & Offroad does not make any representation or warranties with respect to the accuracy, applicability, fitness, or completeness of the Video Content. MKS Performance & Offroad does not warrant the performance, effectiveness or applicability of any sites listed or linked to in any Video Content.
The Video Content is not intended to be a substitute for professional mechanic advice, diagnosis, or repair. Never disregard professional mechanic advice or delay in seeking it because of something you have read or seen on our channel.
MKS Performance & Offroad hereby disclaims any and all liability to any party for any direct, indirect, implied, punitive, special, incidental or other consequential damages arising directly or indirectly from any use of the Video Content, which is provided as is, and without warranties.
See our links provided below on products we have used.
STAY CONNECTED! Follow us on:
Instagram: @mksperformanceandoffroad
Twitter: @MKSperformanc
MeWe: MKS Performance & Offroad
Rumble: @Mksperformanceandoffroad
My Mod List:
-Fuel D588 20X10 Wheels
-Cooper AT3 XLT 35X12.50R20
-Raceme Ultra Programmer
-Isspro R30000 Factory match Back pressure gauge
-Katzkin Leather seat covers
-Weathertech floor mats : amzn.to/2YYvLvR
- Husky Floor Mats : amzn.to/2KL86Kn
-K&N drop in Air Filter : amzn.to/2N0DAPv
-K&N Filter Cleaning Kit : amzn.to/2Z26CnW
-Autometer A-Pillar dual gauge pod : amzn.to/2Z3t8ZX
-Alfaobd programming factory features
-KAOD Tech Security Gateway Module Bypass Harness
-Spray in Bedliner
-RAM Cargo LED Bed lights : amzn.to/2KMnXIK
-Bilstein 2.3” Level Kit with 5100 series shocks for diesel : amzn.to/2YG1W81
-Obdlink MX+ : amzn.to/2H3Xt46
-Black Cummins Turbo Diesel Badge : amzn.to/2Zxwa8E
-South Bend Dual Disc 3250GK clutch kit : amzn.to/3ngruQT
-Airlift 7500XL airbag kit P/N 57589 - amzn.to/3n64HGY
My Vlogging Gear (Affiliate Links):
Cameras
1. Iphone 11 Pro
2. Nikon D3200
3. Gopro Hero7 silver - amzn.to/3rHPM9K
DISCLAIMER: This description contains affiliate links, which means that if you click on one of the product links, we may receive a small commission. This helps support the channel & allows us to continue to make more videos like this. Thank you for your support! 
Авто/Мото
Thanks man much appreciated 🙏
Noticed the black (Ditch Trim) left/right of roof at brake light level. That’s where roof and C-pillar meet. That is where, my 2007 is leaking. Water follows cab trim, to a leak dumping water in the corners of my cab. 😡🤬
Tons of places to leak from if you have additional areas like sunroof, cab lights, rear sliding window, and of course the CHMSL
Albert, sir, thank you much for replying. The interesting thing is that we have three of these trucks two from 2006 one with sunroof one without the one without has never leaked from those front door handles the 2006 with the sunroof when parked at the curb, it does slightly tilt towards the right side on a level street, and 1 inch rain. We hang a 1 gallon bucket from the doorhandle grab handle a pillar and it will fill that bucket as you described the 2014 truck #1 pointing uphill in our driveway at about a 3° angle. The water is coming in next to the passenger side rear headliner, and we have been putting a towel there and changing it out That Ditch trim you speak of? Is that the black trim that runs on the roof perhaps hiding a body seam going from the front to the back of the roof on our mega cab. We tried sealing up around the rear, brake light with silicone and sadly this did not work, do I need to pull this black trim off the roof and look underneath thanks for your help again only are two trucks with the sunroof are the ones leaking which is interesting. They are both mega cabs one from 2006 and one from 2014 2006 truck only leaks at the front door grab handle passenger side mainly Although my wife used to complain, Water would hit her knee when she was driving. Then I think I said put a towel on your lap ha ha we are constantly changing out towels and putting the fan in the truck to dry things out in our driveway. It appears that mainly it is passenger side headliner getting wet in the 2014 as I recall although there may be a bit of moisture on the driver side rear ,also Headliner
@redwood6737. yes, have attempted to seal up, “Ditch Trim,” Right rear storage, is now dry. Left side still leaking/pooling in storage. Have cleared rear window drains, prior to current pooling. All sunroof drains are flowing, “full stream. The third brake light area was dry, no staining. 6:06
When did you plug the light back into the truck wire harness I know when but it should be reconnected looking at your vid you never plugged in to the truck connection and just screwed it back to the back of the cab ?
Plug it in before you reinstall.
R 2014 Limited mega cab leaks at the passenger rear headliner and also there’s water on the carpet right next to the passenger rear door. Also water drips from the front passenger grab handle which could be because the front sunroof drains are plugged? Or 2006 mega cab Only leaks from the front passenger grab handle and we have a clean the front drains from the sunroof in the front door pillars but it still leaks in the last frame. Thanks for your help. There should be a class action lawsuit and a recall on these leaky ram trucks
@@redwood6737I have an 07. There is trim(Ditch Trim) left and right of roof at third brake light level. Rain water is following that trim, dumping water on my headliner. Park pointed down hill, water to front of truck. Park pointed uphill, water fills storage under rear seats. 😡🤬
I thought they already addressed this problem? Mine was in for 2 weeks, headliner was pouring water on dash! They replaced my brake light assembly. So far, no more leaks.
The dealer resealed mine incorrectly and I ended up doing the reseal myself because they didn’t follow the instructions FCA gave them. This is just showing you the method that works and all the dealer does or is suppose to do is put windshield adhesive sealer on your foam gasket and reinstall. If they only put a new light in beware, it may leak again.
@@MKSPerformanceOffroad They replaced my housing, MINUS my led modules. Now I have to reopen it, to install new LEDs?! Those incands, aren't bright enough for hitching the fiver at night.
@@03redrubi while you have it out, do yourself a favor and put some windshield adhesive sealant on the foam gasket and re-install it.
@@MKSPerformanceOffroad Yeah, thanks for that, since I will have to break the seal again. I thought you were going with the bed cam light combo?
BTW, I'm looking at that Banks Pedal Monster. Looks like a solid performer!
Sooo if you had to take it off again to replace a bulb...what would you do? Haha
Remove it, replace bulb and reseal again. I have done this on 2 different trucks. The chmsl is now an led so if I had to replace a bulb it would be the assembly.
That's why you replace the bulb with LED bulbs they'll last longer.
Did you forget to plug it back in!?!?
No it was plugged back in.
@@MKSPerformanceOffroad 8:13, why doesnt it look pluged in there?
Did you drop the headliner and plug it in that way?
@@chriso1373 I may have plugged it back in from inside as the headliner was down at some point during the process for drying interior out. Dealer had sealed it incorrectly and water was pooling in the floor. We had to dry it out in the garage with big fans. Easiest to plug in before installing back if you have a helper to hold the light while you put your sealant on. I was using a caulk gun which made it a little more difficult if I recall to hold the light and caulk at the same time.
You'll need a stick of Dynamite to remove cover if a bulb burns out...no thanks...
It was still pretty easy to remove when we had to do some other work. You can use this or RTV on the factory foam seal or just RTV.
maybe I will try it then,,,thanks@@MKSPerformanceOffroad
@@dbergum1 I have an LED CHMSL so not a big deal for me but if you are doing bulb changes more often try RTV first.
The trim (Ditch Trim) left and right of the third brake light, is where water is following the trim and returning to my headliner. Park uphill, fills storage under rear seats. Park downhill the water comes out the front grab handles.
I ended up breaking my old light off to replace bulbs previous owner siliconed it on and had to buy a new light